Document Overview

This 2016 spare parts catalog by Opall-Agri (Czech Republic) provides a comprehensive technical reference for maintenance, repair, and ordering of replacement parts for the Mounted Reversible Plough models JUPITER 140/100 and JUPITER 140/90.

1. Product Description and Scope

The catalog covers components for JUPITER 140/100 and 140/90 ploughs, featuring 4 to 5 shares with shear bolt or spring overload protection. It supports routine maintenance and common repairs, with warranty repairs handled by official service technicians.

2. Contact Information

• Manufacturer: Opall-Agri, Hertice 7, Dolní Životice, Czech Republic
• Phone: +420 553 786 165-8
• Fax: +420 553 786 126
• Email: [email protected]
• Website: www.opall-agri.cz
• Service Technician Phone: +420 737 245 938

3. Catalog Content Structure

The catalog is organized by assemblies and parts, each with unique part numbers, descriptions, quantities, weights, and notes. Key sections include:

• Frames and frame extensions (4R and 5R configurations)
• Turn-over heads, axles, cross shafts, mounting shafts
• Drawbars, external screws, nuts
• Depth wheels with brakes, combined wheels
• Half-axles, share holders, and share bodies (UN, PA, KV series)
• Skimmers, coulters, furrow openers
• Hydraulic components (cylinders, circuits)
• Transport and safety markings
• Bearings, bushings, pins, bolts, nuts, washers, springs, lubricating nipples

4. Technical Specifications and Parameters

• Frame spacing: 100 cm (J140/100), 90 cm (J140/90)
• Component weights provided (e.g., frame approx. 195-205 kg)
• Tightening torques: M24x2 bolts at 200 Nm, shear bolts at 50 Nm, M20 bolts at 100 Nm, M14 bolts at 80 Nm
• Fastener dimensions and part numbers specified
• Wheel tyre sizes: 10.0/75-15.3 and 13.0/55-16 with load ratings

5. Maintenance and Repair Recommendations

• Use original spare parts to ensure safety and proper function
• Regular lubrication at designated points with specified nipples and covers
• Contact official service technicians for warranty repairs

6. Important Notes and Best Practices

• Employ shear bolt or spring systems for overload protection
• Apply correct torque to bolts to prevent damage or failure
• Replace worn shares and components with exact part numbers
• Follow correct assembly order and ensure compatibility between models

7. Summary of Key Components and Assemblies

• Frames and extensions (e.g., part nos. 40414-01-004, 40414-51-004)
• Turn-over heads and axles (40414-02-003)
• Cross shafts (40400-02-006, 40400-02-011)
• Drawbars and screws (40414-03-005, 40414-03-002)
• Depth wheels with brakes (40414-06-007, 40414-06-017)
• Combined wheels (40414-07-003, 40414-07-013)
• Half-axles 50x50
• Share holders and bodies (UN, PA, KV series)
• Hydraulic cylinders and components (40414-82-001, 40411-19-003)
• Transport marking and safety equipment

8. Technical Parts List and Assembly Components Summary

8.1 Mechanical Fasteners and Holders

• Holders, arms, pins, bolts, nuts, washers, springs with detailed dimensions and quantities
• Tightening torques specified for bolts (e.g., 100 Nm for M20, 80 Nm for M14)
• Self-locking nuts and securing washers recommended for assembly integrity
• Compression springs detailed by size and type

8.2 Hydraulic Components

• Hydraulic cylinders with part numbers, weights, and dimensions
• Associated seals, piston rods, wiper rings, O-rings, bushings
• Hydraulic fittings, throttle valves, hoses (e.g., 1SN 6x1000), dust caps
• Hydraulic locks and clamps for safety

8.3 Structural and Support Components

• Bracing elements, arms, tie rods, brackets, clamps, supports
• Wheel hubs, levers, notched/plain discs, plates
• Reflectors, warning plates, traffic signage for safety compliance

8.4 Agricultural Implement Specific Parts

• Plough bodies (Orební těleso) including legs, plates, pads, landsides, mouldboards, reinforcements, shins
• Skim coulters and holders, right and left brackets, spacers
• Right frog (Střevíc UN 400 P) and trashboard holders

8.5 Critical Parameters and Recommendations

• Tightening torques critical for assembly safety
• Component weights assist handling and load planning
• Quantities guide correct ordering and inventory
• Alternative parts available for some components
• Use self-locking nuts and securing washers on critical fasteners

8.6 Summary of Key Components (Extracted Table)

8.7 Best Practices and Assembly Notes

• Apply specified tightening torques
• Use self-locking nuts and securing washers on critical fasteners
• Verify quantities per assembly
• Consider alternative parts where noted
• Maintain lubrication points for hydraulic components

9. Detailed Parts List for Agricultural Plough Components

9.1 Component Categories

• Fasteners: bolts (M10 to M24), nuts (standard and self-locking), washers, sleeve nuts
• Cutting and Wear Parts: chisels, shares, points in standard and carbide (hard faced) versions
• Landsides and Mouldboards: front/rear landsides, mouldboard extensions, stripes
• Reinforcements and Stays: bolts, stays, holders for trashboards and landsides
• Specialized Parts: furrow cutters, share knives, landside protections

9.2 Material and Special Notes

• Carbide parts heavier, designed for enhanced wear resistance
• Self-locking nuts improve fastening security
• Quantities specified per right/left plough body or per pair
• Weights provided for logistics and handling

9.3 Assembly Groupings

• Parts grouped by plough body type and side (right/left)
• Variants include UN 350/400, PA 400, KV series with different mouldboards and reinforcements

9.4 Critical Parameters and Recommendations

• Use correct fastener quantities per plough body side
• Choose carbide parts for high wear applications
• Use self-locking nuts where specified
• Refer carefully to part numbers for replacements

9.5 Summary of Key Data (Extracted Table)

10. Technical Components Overview for KV Series Plough Bodies

10.1 Component Identification

• Complete plough bodies for KV series: Orební těleso P and L (part nos. 40411-75-001 and 40411-75-002)
• Standard chisels and cutting edges for P and L bodies
• Complete sliding coulters (Plazové krojidlo KV) for left and right sides

10.2 Detailed Parts List for Left KV Plough Body

• Left Frog (40411-70-022, 12.93 kg)
• Left Mouldboard (073291, 20.2 kg)
• Left Shin (073231, 1.9 kg)
• Reinforcement bolts (M20-425, M20-745)
• Landside stay and retaining screws (073808, 40411-50-035)
• Landside (073609, 7.81 kg)
• Various bolts, nuts, washers with specified weights

10.3 Variants KV9 L and KV28 L

• KV9 L includes larger mouldboard (083229, 24.96 kg) and extended shin (073251-OP, 1.7 kg)
• Reinforcement bolts D25/M20-400 and D25/M20-765 (1.35 kg and 2.87 kg)
• Two types of landside stay holders (073808 and 073801)
• Adjusted quantities of fasteners and washers

10.4 Notes and Quantities

• Quantities are per one left plough body unit
• Correct part selection and assembly critical for performance

Summary of Critical Information

• Precise part numbers and weights essential for ordering and assembly
• Variants differ mainly in mouldboard size and reinforcements
• Fasteners specified with exact dimensions and quantities
• Left and right components distinctly identified to avoid errors

Conclusion

This catalog is a detailed and structured technical resource for the maintenance, repair, and assembly of JUPITER 140/100 and 140/90 mounted reversible ploughs. It provides exhaustive parts identification, technical specifications, torque and assembly guidelines, and best practices to ensure optimal equipment performance and longevity. Users are advised to strictly follow specified part numbers, quantities, and maintenance recommendations, and to use original parts and official service support for warranty and safety compliance.