*myagriexpo

Pegas

Product catalog summary

Service Spare Parts Catalog Overview

This catalog provides detailed information on spare parts for Disk Harrows, specifically the PEGAS models with 3m and 4m suspended versions featuring a silent block overload protection system for the discs. It is intended to support common repairs and regular maintenance of the machines.

For warranty or post-warranty repairs, users are advised to contact the official service technician.

Catalog Structure and Content

The catalog is organized into sections by machine components and includes part numbers, quantities, descriptions, weights, and notes. The main sections are:

Frames: Covers frames for PEGAS models of 3m, 4m, 8m, and 10m widths.
Disc Units: Includes front, rear, and outer disc units with detailed parts such as disc arms, serrated discs, bearings, and dampers.
Roller Sections: Frames and components for rollers of 2m, 2.5m, and 3m widths, including side plates, pins, bolts, nuts, washers, and stoppers.
Accessories: Various brackets, levers, holders, side plates, and weights (up to 330kg) for machine customization and repair.
Rollers: Different types of rollers including flexible rollers, cracker rollers, and tubular crumbling rollers with dimensions and weights specified.
Fasteners and Small Parts: Comprehensive listings of screws, bolts, nuts, washers, pins, and roll pins with sizes and quantities required per frame or section.

Key Specifications and Parameters

Frames are specified by width and weight, e.g., 3m frame weighs approximately 244 kg, 4m frame 329 kg, 8m and 10m frames heavier accordingly.
Disc units include serrated discs sized 520 mm with thicknesses of 6 mm or 8 mm, and associated bearing units.
Rollers vary by type and width, with weights ranging from approximately 111 kg for a 2m flexible tube to 243 kg for a 3m cracker roller.
Weights and stoppers are detailed with exact mass values, important for balancing and machine stability.
Fasteners are listed with metric sizes (e.g., M8, M12, M16, M20, M24) and lengths, critical for correct assembly and maintenance.

Maintenance and Repair Recommendations

The catalog serves as a guide for routine maintenance and common repairs, emphasizing the use of original parts for optimal performance and safety. It also highlights the importance of consulting authorized service technicians for warranty-related issues.

Summary of Critical Information

Use specified part numbers and quantities for ordering to ensure compatibility.
Adhere to the recommended assembly components such as silent blocks for overload protection.
Maintain proper torque and fastening standards using the listed bolts and nuts.
Replace worn rollers and discs with exact matches to preserve machine efficiency.
Utilize the detailed weight data for proper machine balance and transport safety.

This structured catalog facilitates efficient spare parts management and supports the longevity and reliability of PEGAS disk harrows.

Catalog excerpts

Diskove brany (Disc harrows) Servism katalog nahradmch dilu / 2017 (Spare parts catalog / 2017)

Open the catalog to page 1

Servisní katalog náhradních dílů Součásti uvedené v tomto servisním katalogu platí pro Diskové brány PEGAS 3m a 4m nesená verze, se siletblokovým systémem jištění proti přetížení disku Tento servisní katalog náhradních dílů stroje slouží k nejběžnějším opravám a pravidelné údržbě Vašeho stroje V případě záručních nebo pozáručních oprav se obracejte na firemního servisního technika 420 737 245 938 747 55 Dolní Životice, Hertice 7, okres Opava, Czech Republik, Tel: 420/553 786 165-8, Fax: 420/553 786 126

Open the catalog to page 2

Pozice Obj. c'islo /p.n. Mn./Q.* Nazev - rozmer Tahlo kratke Cep zavesu D36 Vzpera Vlozka Rozpera Cep 25 Sroub M 8x25 Sroub M 16x110 Sroub M 20x1,5-60 Sroub M 24x2-70 Sroub M 24x2-130 Matice M 8 Matice M 16 Matice M 20x1,5 (7611452) Matice M 24x2 (7611478) Podlozka D 8,4 Podlozka D 17 Podlozka D 21 Podlozka D 25 Podlozka D 28 Podlozka D 37 Kolik s krouzkem 10x38 LP10KR Kolik s krouzkem 16 mm III. Tubus plastovy sroubovad D102- Bolt M 16x110 Bolt M 20x1,5-60 Bolt M 24x2-90 Bolt M 24x2-130 Nut M 8 Nut M 16 Nut M 20 Nut M 24 Washer Washer D 17 Washer D 21 Washer D 25 Washer D 28 Washer D 37 Roll...

Open the catalog to page 6

Pozice Obj. cislo / p.n. Mn./Q. Nazev - rozmer Drzak disku L predm Drzak disku P zadni Drzak disku L krajni Drzak disku P krajni Objimka Disk krajni levy, 520x8 Pegas Disk zubaty, 520x6 Pegas Loziskova jednotka pro disk Pero tesne 10x8-32 Silentblok D40 Sroub M 12x1,25-20 Sroub M 14x40 Sroub M 14x70 Matice M 14 Matice M 22x1,5 Podlozka D 12,2x25x1,5 Podlozka D 15 Podlozka D 22sp Disc arm L front Disc arm R rear Disc arm L outer Disc arm R outer Clamp Serrated disc outer Serrated disc Pillow block bearing Key Damper D40 Screw M 12x1,25-20 Screw M 14x40 Screw M 14x70 Nut M 14 Nut M 22x1,5 Securing...

Open the catalog to page 8

Pozice Obj. c'isio / p.n. Mn./Q.* Nazev - rozmer Ram valce 2m Ram valce 2,5m Ram valce 3m Bocnice Sroub 3.bodu Cep 25 Zaveske oko M24-vyhnute Sroub M 16x50 Sroub M 24x2-70 Matice M 16 Matice M 24x2 Podlozka D 17 Podlozka D 25 Roller frames 2m Roller frames 2,5m Roller frames 3m Side plate Top link Pin Eye Bolt M 16x50 Bolt M 24x2-90 Nut M 16 Nut M 24 Washer D 17 Washer D 25 Pozice Obj. cisio/p.n. Mn./Q.* Nazev - rozmer Description (EN) m (kg) Poznamka

Open the catalog to page 10

Pozice Obj. cislo / p.n. Mn./Q. Nazev - rozmer Holder Bracket L Bracket R Bracket L Bracket R Lever L Lever R Pin Stopper Pin Stick L Stick R Shield Bolt M 12x40 Bolt M 12x100 Screw M 16x45 Bolt M 16x190 Nut M 12 Nut M 16 Washer D 13 Washer D 17 Roll pin 40425-08-001 Zavazi 330kg Pozice Obj. cislo /p.n. Mn./Q. Nazev - rozmer Description (EN) m (kg) Poznamka

Open the catalog to page 12

Valec flex 2 m Valec flex 2,5m Valec flex 3m Flange bearing - round D35-4xM12/ 2,01 "mnozstvi dle stfky zaberu - cca na 1m zaberu Pozice Obj. c'islo /p.n. Mn./Q. Nazev - rozmer Description (EN) m (kg) Poznamka

Open the catalog to page 14

Vyterak flex valec 2m Vyterak flex valec 2,5m Vyterak flex valec 3m Pozice Obj. cislo / p.n. Mn./Q. Nazev - rozmer Doraz operny 2m Doraz operny 2,5m Doraz operny 3m Doraz 2m Doraz 2,5m Doraz 3m Pruzna noha vyteraku Patka vyteraku Sroub M 10x30 Sroub M 10x35 Sroub M 12x140 Matice M 10 Matice M 10 Matice M 12 Podlozka D 10,5 Podlozka D 13 Stopper Stopper Stopper Stopper Stopper Stopper Intermediate Packer Spring Wearing plate Bolt M 10x30 Screw M 10x35 Bolt M 12x140 Nut M 10 Nut M 10 Nut M 12 Washer D10,5 Washer D 13 "mnozstvi dle stfky zaberu

Open the catalog to page 16

All OPALL - AGRI s.r.o. catalogs and technical brochures

Catalogue 2020
33 Pages
Saturn iv
62 Pages
Jupiter 140
60 Pages
Hektor
22 Pages