HARRIS LUMEN SELECT LED HIGH BAY, GEN 1 LSLH1 Applications The HARRIS LSLH1 Lumen Select is an innovative high bay that allows for six field selectable lumen packages. For new construction or retrofit, the low profile design offers energy savings, low maintenance, and control options for low or high bay settings in industrial, commercial, and retail applications. Having the ability to adjust the light output in the field reduces audit challenges, and decreases project inventory complexity. LSLH1A1UNVDSXXLFAHW (Lens Option Shown) Rated Life Field adjustable lumen output using Orion Lumen Select technology. One fixture offers six field adjustable lumen packages (see installation guide and page 4 for field configurations) Narrow lightweight I-Frame 2' and 4' aluminum body allows for optimal thermal management and ease of handling during installation Acrylic frosted lens option reduces glare and enhances low bay applications Rigid and suspended mounting options 6 kV surge protection standard, 10 kA surge protection available Factory installed end mounted sensor option Available in 120v-277v, 347v and 480v Adjustable Light Output with Dip Switches For calculated L70 hours, please contact an Orion representative Ambient Operating Range See ambient operating table on page 3 See Orion's Product Limited Warranty for more details and information Fixture Certifications & Listings • • UL/cUL Listed Buy American Act Compliant *Note: If standard low-cycle is selected and used with control device or switching method that over cycles the fixture, the limited warranty will be negatively impacted and may be void Patent Information Orion is serious about intellectual property. This product may be covered by one or more patents. Patent information available at http://www. orionlighting.com/about/patents Fixture Versions Standard Low-Cycle* • Intended for use with no control device or where on/off cycles from control devices or switching method is 4 times or less per day. Standard High-Cycle • Intended for use where on/ off cycles from control devices or switching methods may be greater than 4 times per day. DAMP RATED © 2017 Orion Energy Systems, Inc. All rights reserved. The Orion logo, ISON™, APOLLO®, HARRIS and InteLite® product names are registered trademarks of Orion Energy Systems. All other trademarks are the property o

HARRIS LUMEN SELECT LED HIGH BAY, GEN 1 LSLH1 Standard Low-Cycle Performance Information, 277v, No Lens3 Series Dip Switch Actual Lumens Configuration Input Current Power Factor 2' Models (AE1) - Standard Low-Cycle LSLH1 4' Models (BE1) - Standard Low-Cycle LSLH1 Input Current Power Factor Standard High-Cycle Performance Information, 277v, No Lens3 Series Dip Switch Actual Lumens Configuration 2' Models (A1) - Standard High-Cycle LSLH1 4' Models (B1) - Standard High-Cycle LSLH1 © 2017 Orion Energy Systems, Inc. All rights reserved. The Orion logo, ISON™, APOLLO®, HARRIS and InteLite® product...

HARRIS LUMEN SELECT LED HIGH BAY, GEN 1 LSLH1 Ordering Information Example (NOTE: No dashes or spaces unless noted below) Series Nominal Lumen Code Driver Type Lens Options Power Connection Fixture Options Control Options Packaging Options Ordering Information Series LSLH1= HARRIS Lumen Select LED High Bay, Gen 1 Nominal Lumen Code1 Standard Low-Cycle Version 2' Lens Options Power Connection Fixture Options Control Options Packaging Options LFA= Lens, Frosted Acrylic OE= Orange Emergency (Painted End Panels) (Blank)= No Control Options (Blank)= Bulk Pack DSXX= Dip Switch Dimming Configuration...

HARRIS LUMEN SELECT LED HIGH BAY, GEN 1 LSLH1 Standard Low-Cycle Versions Dip Switch Configurations for 2 ft. AE1 Models, No Lens and 4 ft. BE1 Models, No Lens Standard High-Cycle Versions Dip Switch Configurations for 2 ft. A1 Models, No Lens and 4 ft. B1 Models, No Lens Physical Information Nominal Lumen Code © 2017 Orion Energy Systems, Inc. All rights reserved. The Orion logo, ISON™, APOLLO®, HARRIS and InteLite® product names are registered trademarks of Orion Energy Systems. All other trademarks are the property of their respec

HARRIS LUMEN SELECT LED HIGH BAY, GEN 1 LSLH1 Fixture Features & Options (Factory Installed) Dip Switch (Factory Installed Standard for All Fixtures - This Allows Fixture Light Output to be Field Adjustable) Accessories (Field Installed) Suspended Mounting Options ECAB19 19” Cables with Snap Hooks (2 Required per Fixture) 31” Cables with Snap Hooks (2 Required per Fixture) Hanging cable, Set of Two: Adjustable 180”, Loop, Y-Fit with Snap Hooks (1 Set per Fixture) Pendant Mounting Bracket Kit for LSLH1 Style Fixtures, Galvanized Steel (Available for Hardwired (HW) models only) Battery Back Up...