Exhibit with us
*myagriexpo  
English
  1. Catalogs
  2. osma
  3. TFK

TFK

TFK
1 / 1 PageView full catalog

TFK

Product catalog summary
Overview: The document describes a mini-forestry mulcher designed for use with mini-excavators ranging from 2.0 to 6.0 tons. It is suitable for cutting grass, shrubs, branches, and small trees with a maximum cutting diameter of 10 cm. The mulcher can also be installed on medium boom mowers with a pressure circuit of at least 230 bar.
Standard Equipment: The mulcher comes with a steel unpainted under plate for building the hitch excavator bracket, a fixed tooth rotor with K carbide tooth, a double frame made of quality steel, and a transmission system with two belts drive for models TFK 70 and 90. The TFK 50 model features a gear cast iron motor fixed directly with the rotor and a mechanical frontal door. Motor sizes for TFK 50 are available in 12cc, 14cc, or 16cc, while TFK 70 and 90 offer 12cc or 20cc motors with a hydraulic frontal door. The rotor includes a DCR limiter system as standard.
Tools: Fixed teeth are recommended for cutting grass and dense vegetation up to a maximum size of 10 cm. The rotor type is K1 with a DCR rotor-limiter system.
Technical Information: The document provides detailed specifications for three models: TFK 50, TFK 70, and TFK 90. Key parameters include cutting width, exterior width, weight, suitable excavator weight, flow rate, pressure set, number of teeth, rotor diameter, and tool tip cutting size.
Optional Features: Optional equipment includes an oil flow divider, an excavator hitch bracket, an electro-hydraulic valve with a cable for door cylinder control, and an adjustable rear roller for boom mower applications.
Additional Notes: The mulchers do not require a drain line, making them versatile for various forestry applications.
See more

Catalog excerpts

TFK-1

FORESTRY LINE TFK FORESTRY MOWERS FOR MINI-EXCAVATORS - NO DRAIN LINE REQUIRED - Mini-forestry mulcher for grass, shrubs, branches, and small trees, suitable on mini-excavators from 2,0 to 6,0 tons. It can be , also , installed on medium boom mowers with pressure circuit not less than 230 bar. Max. cutting diameter 10cm. STANDARD EQUIPMENT: Steel unpainted under plate, to build the hitch excavator bracket, Fixed tooth rotor with K carbide tooth, double frame with quality steel, transmission with nr.2 belts drive for TFK 70 and 90, TFK 50 has the gear cast iron motor fixed directly with rotor, and mechanical frontal door. TFK 50 size motors available are 12cc, 14cc or 16cc. TFK 70 and 90 motors size available are 12cc or 20cc and the frontal door is hydraulic with cylinder. Rotor is made with DCR limiter system as standard. Technical information Model Code Excavator Flow rate Pressure Tooth Rotor weigh ton. lt/min set bar nr. diam. mm Fixed Teeth recommended for cutting grass and dense vegetation max size 10 cm. - Cod. ZPK0025 Rotor type K1 DCR rotor - limiter system

 Open the catalog to page 1

All Osma catalogs and technical brochures

  1. TFL-Q
    TFL-Q

    1  Page

  2. SS/K RT
    SS/K RT

    1  Page

  3. TTK
    TTK

    1  Page

  4. TFS/UX
    TFS/UX

    1  Page

  5. TFXL
    TFXL

    1  Page

  6. TP/R
    TP/R

    1  Page

  7. TFL
    TFL

    1  Page

  8. TFL/R e TFM/R
    TFL/R e TFM/R

    1  Page

  9. TFL/UX
    TFL/UX

    1  Page

  10. TFM
    TFM

    1  Page

  11. TFM-UX
    TFM-UX

    1  Page

  12. TFS
    TFS

    1  Page

  13. Product Catalog
    Product Catalog

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.