Exhibit with us
*myagriexpo  
English
  1. Catalogs
  2. osma
  3. TFL-Q

TFL-Q

TFL-Q
1 / 1 PageView full catalog

TFL-Q

Product catalog summary
Overview: The Midi-forestry mulcher is designed for cutting grass, bushes, branches, dense vegetation, and small trees. It is compatible with mini-excavators weighing between 10.0 to 15.0 tons and supports a maximum power of 120hp, with a maximum cutting diameter of 20cm.
Standard Equipment: The mulcher includes a steel unpainted under plate for building the hitch excavator bracket, Q carbide fixed tooth, and a transmission with five belts drive. Piston motor sizes available are 47 or 55cc, each equipped with a special OSMA main valve featuring three functions: By-pass (anticavitation), antishock (regulated at 300 bar), and oil flow regulation. The motor can operate without a drain port connection, which must be specified if the excavator lacks a drain line system. A frontal hydraulic door is also included.
Tools: The mulcher uses a fixed tooth with a carbide insert suitable for strong vegetation and trees. The rotor is 180° reversible with two sides.
Optional Features: Optional features include a DCR rotor with steel profiles, an excavator hitch bracket, a VM55 variable displacement hydraulic motor, an electro-hydraulic valve with cabin cable for door cylinder control, a foot support for climbing excavators (spiders), and a DCR limiter rotor system available for all versions.
Technical Information: The mulcher is available in two models:
  • TFL-Q 100: Cutting width of 100 cm, exterior width of 105 cm, weight of 795 kg, suitable for excavators weighing 9.0 - 11.0 tons, with a flow rate of 90-100 lt/min, pressure set at 250-270 bar, 22 teeth, rotor diameter of 323 mm, and tool tip cutting of 510 mm.
  • TFL-Q 130: Cutting width of 130 cm, exterior width of 155 cm, weight of 840 kg, suitable for excavators weighing 11.0 - 15.0 tons, with a flow rate of 90-100 lt/min, pressure set at 250-270 bar, 26 teeth, rotor diameter of 323 mm, and tool tip cutting of 510 mm.
See more

Catalog excerpts

TFL-Q-1

FORESTRY LINE Midi-forestry mulcher for cutting grass, buses, branches, dense vegetation and small trees. Suitable on mini-excavator from 10,0 to 15,0 tons, with maximum power of 120hp, Max. cutting diameter 20cm. STANDARD EQUIPMENT: Steel unpainted under plate, to build the hitch excavator bracket, Q carbide fixed TOOTH, transmission with nr. 5 belts drive. Piston motor size available are 47 or 55cc. Every hydraulic motor is equipped with a special OSMA main valve with 3 Function, called 3F, By-pass (anticavitation), antischock (regulated at 300 bar) and oil flow regulation. Pre-setted at factory according to the size piston motor fitted on. Every Piston motor can be used without the drain port connection, but it must specified at the order, if the excavator hasn’t the drain line system on it. Frontal hydraulic door. Technical information Flow rate Pressure Tooth Rotor lt/min set bar nr. diam. mm Fixed tooth with carbide insert for strong vegetation and trees Cod. Q Rotor - 180° reversible (2 sides) Optional: DCR rotor with steel profiles

 Open the catalog to page 1

All Osma catalogs and technical brochures

  1. TFK
    TFK

    1  Page

  2. SS/K RT
    SS/K RT

    1  Page

  3. TTK
    TTK

    1  Page

  4. TFS/UX
    TFS/UX

    1  Page

  5. TFXL
    TFXL

    1  Page

  6. TP/R
    TP/R

    1  Page

  7. TFL
    TFL

    1  Page

  8. TFL/R e TFM/R
    TFL/R e TFM/R

    1  Page

  9. TFL/UX
    TFL/UX

    1  Page

  10. TFM
    TFM

    1  Page

  11. TFM-UX
    TFM-UX

    1  Page

  12. TFS
    TFS

    1  Page

  13. Product Catalog
    Product Catalog

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.