TFL/UX

Product catalog summary

Overview

The document describes the TFL/UX series of forestry mulching heads designed for midi excavators. These mulchers are intended for cutting shrubs, dense vegetation, and small trees, suitable for excavators weighing between 700 kg and 1200 kg with engine power up to 100 HP. The maximum cutting diameter is 20 cm.

Standard Equipment

Raw plate for constructing the attachment saddle
Rotor equipped with fixed cutting tools
Hydraulic hoses 2 meters in length
47 cc piston hydraulic motor
Hydraulically openable door
Support skids
Transmission via trapezoidal XPB belts

Technical Specifications (Model TFL-UX 100)

Parameter	Value
Code	655100
Working Width	105 cm
Overall Width	125 cm
Weight	690 kg
Excavator Oil Flow	7.0 - 10.0 liters/min
Operating Pressure	90 - 100 bar
Number of Hammers	21

Additional Notes

The hydraulic cylinder requires two 3/8" hydraulic connections for operation.

Optional Features

Custom-sized attachment with steel pins
56 cc piston motor

Cutting Tools

Fixed tool with tungsten carbide inserts (Code UX 285)
Standard rotor model X200

Catalog excerpts

I PRODOTTI GRUPPO E - TRINCIATRICI FORESTALI PER ESCAVATORI Testata trinciante forestale per arbusti, folta vegetazione e piccole piante, applicabile a escavatori con pesi da 70 q.li fino a 120 q.li e con potenze fino a 100 HP. Diametro max di taglio cm.20. DOTAZIONE DI SERIE: Piastra grezza per costruzione sella di attacco, rotore con utensili fissi, tubi idraulici da mt.2.00 di lunghezza. Motore idraulico a pistoni da cc.47. sportello apribile idraulico, slitte di appoggio, trasmissione a cinghie trapezoidali XPB.

Open the catalog to page 1