Exhibit with us
*myagriexpo  
English
  1. Catalogs
  2. osma
  3. TFM

TFM

TFM
1 / 1 PageView full catalog

TFM

Product catalog summary
Overview: The document provides technical specifications and options for the TFM series of forestry mulching heads designed for mid-sized excavators. These are used for cutting shrubs, dense vegetation, and small trees.
Specifications: The TFM mulching heads are compatible with excavators weighing between 120 to 180 quintals and with power up to 130 HP. They can cut a maximum diameter of 25 cm. Standard equipment includes a raw plate for constructing the attachment saddle, a rotor with retractable hammers, 2-meter hydraulic hoses, a 56 cc hydraulic piston motor, a hydraulically openable door, support skids, XPB trapezoidal belt transmission, and a robust high-yield steel structure with an internal casing fully lined with HARDOX 400 steel.
Models:
  • TFM 100: Work width 105 cm, overall width 125 cm, weight 860 kg, oil flow 10.0 - 12.0 lt/min, pressure 230-250 bar, 16 hammers.
  • TFM 130: Work width 130 cm, overall width 150 cm, weight 940 kg, oil flow 12.0 - 15.0 lt/min, pressure 230-250 bar, 20 hammers.
Notes: Two 3/8” hydraulic connections are required for operating the hydraulic cylinder. The TFM series can be equipped with a pair of support skids that raise the hammer cut from about 1 cm to 8-9 cm above the ground, recommended for areas with stones and protruding rocks, especially in mountainous regions.
Optional Features: Custom-sized attachment with steel pins, 64 cc piston motor, double-edged hammers, and single-edged hammers with tungsten carbide overlay.
Cutting Tools:
  • Single-edged forged and tempered hammer (Code ZP 10280).
  • Double-edged forged and tempered hammer (Code ZP 10280 REV, optional).
  • Single-edged forged and tempered hammer (Code ZP 10280MD, optional).
See more

Catalog excerpts

TFM-1

I PRODOTTI GRUPPO E - TRINCIATRICI FORESTALI PER ESCAVATORI Testata trinciante forestale per arbusti, folta vegetazione e piccole piante, applicabile a escavatori con pesi da 120 q.li fino a 180 q.li e con potenze fino a 130 HP. Diametro max di taglio cm.25. DOTAZIONE DI SERIE: Piastra grezza per costruzione sella di attacco, rotore con mazze a scomparsa, tubi idraulici da mt.2.00 di lunghezza. Motore idraulico a pistoni da cc.56. sportello apribile idraulico, slitte di appoggio, trasmissione a cinghie trapezoidali XPB, struttura robusta in acciaio ad alto limite di snervamento, cassa interna rivestita interamente in acciaio HARDOX 400. Mazze a doppio tagliente Mazze mono tagliente con riporto al tungsteno Mazza forgiata e bonifi-cata mono tagliente Cod.ZP 10280 Rotore HD - di serie - Mazza forgiata e bonifi-cata mono tagliente Cod.ZP 10280MD opzionale Mazza forgiata e bonifi-cata doppio tagliente Cod.ZP 10280 REV opzionale

 Open the catalog to page 1

All Osma catalogs and technical brochures

  1. TFL-Q
    TFL-Q

    1  Page

  2. TFK
    TFK

    1  Page

  3. SS/K RT
    SS/K RT

    1  Page

  4. TTK
    TTK

    1  Page

  5. TFS/UX
    TFS/UX

    1  Page

  6. TFXL
    TFXL

    1  Page

  7. TP/R
    TP/R

    1  Page

  8. TFL
    TFL

    1  Page

  9. TFL/R e TFM/R
    TFL/R e TFM/R

    1  Page

  10. TFL/UX
    TFL/UX

    1  Page

  11. TFM-UX
    TFM-UX

    1  Page

  12. TFS
    TFS

    1  Page

  13. Product Catalog
    Product Catalog

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.