Exhibit with us
*myagriexpo  
English
  1. Catalogs
  2. osma
  3. TTK

TTK

TTK
1 / 1 PageView full catalog

TTK

Product catalog summary
Overview: The Mini-Forestry Mulcher is designed for small tractors with a low PTO position (40-45 cm from the ground). It is equipped with a fixed tooth rotor capable of mulching grass, branches, wood, and dense vegetation up to 12 cm in diameter. The required tractor power ranges from 30 to 60 hp.
Standard Equipment: The mulcher includes a three-point linkage cat. I° and II°, a PTO of 540 rpm, a rear hydraulic door, and a robust frame made from quality steel with a double chassis and counter blades. It features a 60 hp gearbox with a free wheel, a rotor with a K fixed tooth built tube of 200 mm diameter and 12.5 mm thickness, a DCR bite limiter system on the rotor, a PTO cardan shaft gr. 6 with shear bolt clutch, lateral skids made of wear-resistant steel, and an internal steel chassis also in wear-resistant steel. A pushing frame is included as standard equipment.
Technical Specifications: The mulcher is available in two models: TTK 110 and TTK 130. The TTK 110 has a cutting width of 110 cm, overall dimensions of 130 cm, and is suitable for tractors with 30-50 hp, weighing 510 kg. The TTK 130 has a cutting width of 130 cm, overall dimensions of 150 cm, and is suitable for tractors with 40-60 hp, weighing 560 kg. Both models operate with a PTO of 540 rpm, have 3 belts, and feature a rotor diameter of 350 mm.
Tools: The mulcher uses K1 plus tooth tools, recommended for cutting grass and dense vegetation up to 12 cm, with code ZPK280. For dense vegetation in rocky ground, K2 tooth tools are recommended, with code ZPK278. Both tool types are supported by a rotor with wear-resistant steel profiles (DCR).
See more

Catalog excerpts

TTK-1

FORESTRY LINE Mini-Forestry mulcher, suitable on small tractors with Low pto position (40-45cm from the ground) equipped with fixed tooth rotor to mulch grass, branches, wood and dense vegetation up to 12cm diam. Tractor power required from 30 to 60 hp. STANDARD EQUIPMENT: Three point linkage cat. I° and II°, Pto 540 rpm, rear hydraulic door, Stronger frame built with quality steel double chassis, and counter blades. 60 hp gear box with free wheel, rotor with K fixed tooth built tube 200mm diam and 12,5 tick., DCR bite limiter system on rotor, pto cardan shaft gr. 6 with shear bolt clutch, lateral skids with wear resistant steel, internal steel chassi in wear resistant steel, The pushing frame is included as standard equipment. Technical information Model Code Cutting Overall HP Weight PTO Belts Teeth Tube width dim. tractor kg. nr. nr. diam. K1 plus tooth Fixed tools recommended for cutting grass and dense vegetation max 12 cm, code ZPK280 K2 tooth Fixed tools recommended for dense vegetation in the presence of rocky ground max 12 cm. code ZPK278

 Open the catalog to page 1

All Osma catalogs and technical brochures

  1. TFL-Q
    TFL-Q

    1  Page

  2. TFK
    TFK

    1  Page

  3. SS/K RT
    SS/K RT

    1  Page

  4. TFS/UX
    TFS/UX

    1  Page

  5. TFXL
    TFXL

    1  Page

  6. TP/R
    TP/R

    1  Page

  7. TFL
    TFL

    1  Page

  8. TFL/R e TFM/R
    TFL/R e TFM/R

    1  Page

  9. TFL/UX
    TFL/UX

    1  Page

  10. TFM
    TFM

    1  Page

  11. TFM-UX
    TFM-UX

    1  Page

  12. TFS
    TFS

    1  Page

  13. Product Catalog
    Product Catalog

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.