1. Catalogs
  2. PARsource
  3. Agrosun Red Sodium High Pressure Sodium (HPS) Lamp 1,000W 2100K

Agrosun Red Sodium High Pressure Sodium (HPS) Lamp 1,000W 2100K

Agrosun Red Sodium High Pressure Sodium (HPS) Lamp 1,000W 2100K

Product catalog summary
Technical Specifications
  • Performance Data: The lamp has an initial lumen output of 145,000 at 100 hours and a rated average life of 24,000 hours. It operates at a Kelvin temperature of 2100K with a CRI of 20 ± 4. The lumen output is 145,000 with 145 lumens per watt and a photosynthetic photon flux of 1810 µmol/s. The warm-up time is 7 minutes, and the hot re-strike time is 2 minutes.
  • Re-lamp Interval: For optimum growth, the re-lamp interval is 9-10 months, average growth is 11-12 months, and maintenance growth is 13-16 months. The lamp can operate in a universal position.
  • Electrical Characteristics: The lamp wattage is 1,000W, requiring ANSI ballast S52. It is not rated for open fixtures.
  • Physical Description: The lamp has a maximum diameter of 2.55 inches and a maximum overall length of 13.85 ± 0.19 inches. The lamp center location is 9.33 ± 0.19 inches. It is made of quartz glass, designated as T10, with a Mogul E39 base type.
Applications: Suitable for horticulture, controlled environment agriculture, daylight supplementation in greenhouse structures, and aquaponics. It enhances flowering and increases crop volume.
Caution: Use with proper circuits and auxiliary equipment to avoid poor performance and potential injury. Handle with care to prevent breakage.
Warning: The lamp emits shortwave ultraviolet radiation, which can cause skin burns and eye inflammation if the outer envelope is broken. Adequate shielding is necessary.
Auxiliary Equipment: Must be operated on ballasts and luminaires meeting ANSI specifications. External protection is required to prevent breakage from water contact.
Notice: Handle broken bulbs carefully to avoid electrical shock. The lamp contains mercury and should be disposed of according to laws.
Lamp Lumen Maintenance Factor: The graph indicates lumen maintenance over time, showing a gradual decrease in lumen output as hours increase.
See more

Catalog excerpts

Agrosun Red Sodium High Pressure Sodium (HPS) Lamp 1,000W 2100K-1

TECHNICAL SPECIFICATIONS Agrosun Red Sodium High Pressure Sodium (HPS) Lamp 1,000W 2100K ITEM CODE: BUSD1AG APPLICATIONS: Horticulture, controlled environment agriculture, daylight supplementation in greenhouse structures, aquaponics. DESCRIPTION: Agrosun Red Sodiums are the best choice for enhanced flowering, increased crop volume, and supplemental greenhouse lighting. Not only will they produce more, larger, and better flowers, but they will do it quicker than common sodium bulbs. Red Sodiums are recommended for situations where high output supplemental light is preferred. ELECTRICAL CHARACTERISTICS PHYSICAL DESCRIPTION CAUTION: This is an electric discharge lamp. Use only with proper circuits and auxiliary equipment. Failure to comply with this requirement may result in poor performance and possible personal injury or property damage for which the lamp manufacturer will not be responsible. Do not scratch glass bulb or subject lamp to undue pressure as either may cause the lamp to break. Wear safety glasses and gloves when installing or removing lamp. WARNING: This lamp can cause serious skin burn and eye inflammation from shortwave ultraviolet radiation if outer envelope of the lamp is broken or punctured. Do not use where people will remain for more than a few minutes unless adequate shielding or other safety precautions are used. This lamp complies with USA Federal Standard 21 CFR 1040.30 and Canada Standard SOR/80-381. AUXILIARY EQUIPMENT: Lamps must be operated on ballasts and luminaires that meet all applicable ANSI specifications. External protection for the lamp is required to minimize bulb breakage due to water contact during lamp operation. For the total supply load, add auxiliary watts to lamp watts. NOTICE: If outer bulb is broken, care must be taken to avoid contact with the arc tube support to avoid electrical shock hazard. Power should be off and lamp cool during replacement. Lamp contains mercury. Manage in accordance with disposal laws. lamprecycle.org Distributed by Hydrofarm, Inc. Petaluma, CA, USA | Hydrofarm.com HYDR4FARM and PARsource Petaluma, CA, USA | PARsource.com

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.