Phantom Double-Ended Commercial Electronic Ballast Electronic ballasts are more efficient compared to traditional magnetic ballasts. An internal electronic microprocessor allows the ballasts to run at a higher working frequency, creating a higher lumen output. This higher output means you can run fewer fixtures and save on energy and equipment costs, compared to traditional magnetic ballasts. The DE electronic ballasts are designed to work with HPS double-ended lamps that need special running frequencies to drive these high output lamps. PARsource ballasts come fully equipped with our exclusive Lock and Seal connector are protected by our 3-year warranty. Ask your PARsource representative for proper bulb pairings. Overview Features ■ More lumen output compared to magnetic or single-ended electronic ballasts ■ More efficient than magnetic ballasts ■ Silent operation ■ Lightweight with a small footprint ■ Designed to work with special double-ended lamps ■ Compatible for remote or attached operation ■ Dimmable & Boost options - Dimmable (Super, 100%, 75% and 60%) * ■ Intelligent lamp detection ■ LED indicators with Smart Alert technology ■ FCC compliant ■ CSA listed ■ 3-year warranty Options ■ Reflector extension cord for remote applications (CSXCORD, CSXCORD5, CSXCORD25) * 120/240, 240 & 277 volt options only Includes ■ Ballast with lamp cord ■ 8' power cord and 6-15P plug Application Notes ■ Use with PARsource 1000 watt double-ended HPS lamps and double-ended Reflectors ■ Double ended HPS lamps are designed to be operated at high-frequencies above100Khz ■ Our DE ballasts ensure that your DE lamp is run at the proper operating frequency, regardless of dimming status ■ Do not run DE lamps with standard (single ended) ballasts. Failure to operate DE lamps at appropriate frequency can and will affect output, lamp life, and cause spectrum shift ■ Running DE lamps with standard ballasts will void the warranty of the ballast and lamp 855.727.5483 (855-PAR-LITE) • 2249 S. McDowell Ext. • Petaluma, CA • USA par source.com

Phantom DE Commercial Electronic Ballast The Phantom DE Commercial Electronic Ballast must be paired with the Phantom Double Ended Reflector and a double-ended lamp that is certified by PARsource to be compatible with the ballast. For remote ballast applications, use a Lock & Seal extension cord (see options). CSXCORD 15' Lock & Seal Lamp Cord Extension 15' 1.60 lbs. Remote CSXCORD5 5' Lock & Seal Lamp Cord Extension 5' 0.60 lbs. Remote CSXCORD25 25' Lock & Seal Lamp Cord Extension 25' 2.55 lbs. Remote