*myagriexpo

Process water chiller

Product catalog summary

Overview
Pas Reform's process water chiller is designed to provide economical cooling for incubators and climate control equipment. It uses refrigerants to cool setters and hatchers, and can also circulate chilled water through HVAC units. The system is energy-efficient, environmentally friendly, and offers consistent temperature control.

Benefits
The chiller operates with low operational costs and high durability. It can be equipped with a heat recovery unit to reuse waste heat, potentially reducing heat production capacity depending on local climate conditions.

How It Works

The chiller removes heat from incoming water using an absorption recirculation cycle with R410a cooling liquid.
Chilled water is stored in a buffer tank for distribution throughout the hatchery.
An optional heat recovery system can transfer produced heat to a heat pump for reuse.

Technical Specifications
The chiller is available in various models with different cooling capacities, installed power, and flow rates. All models use R410a refrigerant and have specific dimensions and sound levels. Key specifications include:

PWC-110: 110 kW cooling capacity, 35.4 kW power, 19.10 m3/hr flow rate, 56 dB(A) sound level.
PWC-600: 600 kW cooling capacity, 173.4 kW power, 104.30 m3/hr flow rate, 67 dB(A) sound level.
PWC-700: 700 kW cooling capacity, 218.8 kW power, 120.40 m3/hr flow rate, 68 dB(A) sound level.

Related Products

Buffer tank and pump set
SmartSetPro™
SmartHatchPro™
Air handling unit
Heat recovery

Note: Specifications are subject to change due to continuous product development.

Catalog excerpts

| Climate control |ra ium quid | | Sbis molut lam Pas Reform Process water chiller To provide economical cooling for incubators and climate control equipment Bovendorpsstraat 11 7038 CH Zeddam The Netherlands Phone +31 314 659 111 [email protected] www.pasreform.co

Open the catalog to page 1

Process water chiller Benefits Pas Reform's process water chiller uses refrigerants to provide cooling for setters and hatchers. Chilled water may also be used to circulate through cooling coils in HVAC units. The refrigeration circuit consists of compressor(s), condenser(s), thermal expansion valve and evaporator(s). Together, these components remove heat from a process load to provide consistent setpoint temperatures 24 hours a day, seven days a week in an energy efficient design with low operational costs that respects the environment. Each part is specially selected for maximum acoustic comfort...

Open the catalog to page 2

All Pas Reform Hatchery Technologies catalogs and technical brochures

Archived catalogs

SmartCount™
12 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list