TRONCARAMI BY PASS PROFESSIONAL! MANUAL! PROFESSIONAL MANUAL BY-PASS LOPPERS PODADORAS MANUALES PROFESIONALES BY-PASS II troncarami C con lama curva a battente e indicato per il taglio di rami con diametro medio, visto che usa un sistema di taglio diretto. La lama curva evita che il ramo esca fuori dalla zona di taglio, mentre la controlama funge da riscontro alla mobile realizzan-do un taglio netto e pulito.La lama e montata su boccole a morsetto, all'interno delle quali viene vincolato il manico con impugna-tura morbida, con tale accorgimento, allentando la vite a morsetto posta sulle boccole, e possibile cambiare i manici, quindicambia-re versione all'attrezzo. The C branch-cutter with curved counter-blade is suitable for cutting branches of medium diameter, as it uses a direct cutting system. The curved blade prevents the branch from protruding out of the cutting area, while the counter-blade acts as a counter-blade to the movable blade, resulting in a clean, clean cut. The blade is mounted on clamp bushings, inside of which the soft-grip handle is clamped; with this arrangement, by loosening the clamp screw on the bushings, it is possible to change handles, thus changing the version of the tool. The C branch-cutter with curved counter-blade is suitable for cutting branches of medium diameter, as it uses a direct cutting system. The curved blade prevents the branch from protruding out of the cutting area, while the counter-blade acts as a counter-blade to the movable blade, resulting in a clean, clean cut. The blade is mounted on clamp bushings, inside of which the soft-grip handle is clamped; with this arrangement, by loosening the clamp screw on the bushings, it is possible to change handles, thus changing the version of the tool. Paterlini by Stalea S.r.l. - Via Bersella, 9 - 42018 - San Martino in Rio (RE) - Tel: +39 0522 1950042 - Web: www.stalea.it - [email protected]