ON-SITE LOX/ LIN GENERATOR MODULAR 2.0TPD or 5.0TPD Available in two sizes, the smaller unit produces 2.0 TPD while the large unit produces 5.0 TPD. These plants are offered with manual, semi-automatic or fully automatic control. Characteristic Value / Description 2.0 TPD Output* 5.0 TPD Output* Purity Operation Weight (approximate) 2.0 TPD Dimensions 5.0 TPD Dimensions 166.7 Ib/hr @ 1-7 psig (LIQUID OXYGEN) 166.7 Ib/hr @ 1-40 psig (LIQUID NITROGEN) 416 Ib/hr @1-7 psig (LIQUID OXYGEN) 416 Ib/hr @ 1-65 psig (LIQUID NITROGEN) 99.5% (LIQUID OXYGEN) | 99.5% (LIQUID NITROGEN) 30 day cycles 6000 kg | 13235 lbs (2.0 TPD) 21000 kg | 46250 lbs (5.0 TPD) Length = 7.3 m | 24.2 ft Width = 3.2 m | 10.6 ft Height = 3.3 m | 10.75 ft Length = 11 m | 36 ft Width = 4.8 m | 16 ft Height = 4.5 m | 15 ft *Production rate based on operation at sea level (atmospheric pressure 760 mm Hg) ambient temperature of 70°F, and relative humidity of 50%. NOTE: Plant is capable of production at temperatures between -65°F to 125°F Overview Designed for applications, including commercial requirements for LOX/LIN, where it is not required to relocate the units on a regular basis. Designed with four modules that are erected at the operating site and connected with prefabricated piping spools that are shipped with unit - fully operational in less than two days. pcigases.com System Design PCI's air separation systems are low pressure process types using the basic “Reverse Brayton Cycle” with a nominal system pressure of 150 psig. This low pressure process is inherently more reliable and less dangerous than a high pressure system that typically uses design pressures of 3000 psig or higher. PCI's oxygen/nitrogen production equipment utilizes proven components, that have been successfully integrated into numerous international commercial and military applications.