ON-SITE LOX / LIN GENERATOR GAMMA 1.5 tpd
2Pages

{{requestButtons}}

Catalog excerpts

ON-SITE LOX / LIN GENERATOR GAMMA 1.5 tpd - 1

ON-SITE LOX / LIN GENERATOR GAMMA 1.5 tpd Available in Automated or Manual Operation Portable and self-contained liquid oxygen and liquid nitrogen generating plant built on a 463L pallet, will fit in a C-130 aircraft, can be flown to a forward area, and generate LOX/LIN in under four hours. Value / Description Output* Purity Operation Utility requirement Weight Dimensions 13.1 gph @ 6 psig (LIQUID OXYGEN) 300-1800 scfh | up to 4900 psig (GASEOUS OXYGEN) 18.5 gph @40 psig (LIQUID NITROGEN) 200-1700 scfh | up to 4900 psig (GASEOUS NITROGEN) 99.5% 02/N2 10 day cycles 260 amps, 460 volts, 3-phase, 60 hertz 315 amps, 380 volts, 3-phase, 50 hertz 4535 kg | 10000 lbs (bare plant) Length = 7.3 ft Width = 9 ft Height = 8.5 ft 'Production rate based on ambient conditions of 70°F temperature and 14.7 psia barometric pressure at sea level NOTE: Plant is capable of production at temperatures between 5°F and +113°F System Design PCI’s air separation systems are low pressure process types using the basic "Brayton Cycle” with a nominal system pressure of 140 psig. This low pressure process is inherently more reliable and less dangerous than a high pressure system that typically uses design pressures of 3000 psig or higher. PCI’s oxygen/nitrogen production equipment utilizes proven components, that have been successfully integrated into numerous international commercial and military applications. PRODUCT PROFILE aaooyiRev

Open the catalog to page 1
ON-SITE LOX / LIN GENERATOR GAMMA 1.5 tpd - 2

System Advantages Purification Process The GAMMA plant features our patented Rapid Pressure Swing Adsorbers (RPSA) technology. This system consists of three adsorption beds that cycle at high speed, one on-stream at pressure and the other two off-stream being regenerated or depressurizing or repressurizing. The bed cycling is controlled by a reliable and simple solid-state programmable logic controller (PLC). PCI’s adsorber system modules are designed to remove moisture and C02 to levels of less than 3 ppm by volume. These minute levels preclude process disruption of these condensibles...

Open the catalog to page 2

All PCI Gases catalogs and technical brochures

  1. EDOCS 120B

    1 Pages