*myagriexpo

Catalogs
Penta TMR Incorporated
Hagedorn Parts Manual

Hagedorn Parts Manual

1 / 73 PagesView full catalog

Hagedorn Parts Manual

Product catalog summary

Beaters

Beater Assembly: This section outlines the components required for assembling beaters, including vertical beaters and adaptors, with specific part numbers and quantities. Essential components such as bolts and washers are highlighted for assembly.
Beater Breakdown: Provides detailed information on the gearbox assembly and various components of the beater frame, including bearings and bolts.

Drivetrain

Input Shaft and Bearings: Lists parts like input shafts, drive shafts, and bearing assemblies, complete with part numbers and descriptions.
Over-running Clutch Shaft: Includes components such as grease zerks, cross kits, and locking pins.
Gearbox: Offers a comprehensive list of gearbox components, including gaskets, bearings, gears, and oil seals.

Beater Pan and Endgate

Beater Pan: Describes the front and back sections of the pan, along with associated bolts and washers.
Endgate: Details the endgate frame, arms, panel, and seal kit, with historical notes on design changes.

Hydraulics

Control Valve, Hoses, and Cylinders: Differentiates between serial numbers for specific parts and configurations, including sequencing control valves and hose fittings.
Push-off Cylinder Assembly: Lists components for different serial number ranges, including cylinder slides and conductor tubes.
Push-off Cylinder Breakdown: Provides a detailed breakdown of cylinder components such as rods, pistons, and seals.

Seal Kits and Cylinder Breakdown
This section details seal kits and the breakdown of push-off cylinders, including part numbers and quantities for components like solid rods, glands, spacers, pistons, and various seals. It specifies that certain parts are included in seal kits and are not available separately.

Special Endgate Cylinder Information
This section addresses the use of non-standard cylinders due to supply issues, outlining the replacement process for different cylinder types with specific part numbers and fitting instructions, emphasizing the use of high-pressure pipe sealant.

Plastic Boards
Details on plastic boards include part numbers and quantities for floor boards, side boards, and special bolts. All boards are provided at stock lengths and require cutting to length.

PTO Shafts
This section covers PTO shaft assemblies and breakdowns, listing part numbers for complete shafts, half shafts, yokes, and various components like cross kits and safety chains. It provides specifications for 1000 RPM operations.

Push-gate and Slide Rail
Information on push-gate assemblies, seals, and slide rails is provided, including part numbers for components like weldments, bearings, and seal kits. The document specifies assembly instructions and component details.

Shields, Covers, and Miscellaneous
This section includes details on shields, SMV signs, jacks, and lights for different serial number ranges. It lists part numbers for panels, covers, and mounting brackets, along with optional components like light sets.

Stone Guard and Wood Rail
Details on stone guards and wood rails include part numbers for guards, uprights, mounts, and bolts. The document specifies assembly instructions and component details.

Wheels, Axles, and Hubs
This section provides information on axles, spindles, hubs, and wheels, including part numbers for axle frames, bushings, grease fittings, and tandem axles. The document advises contacting Hydra-Spread for wheel and tire packages.

Catalog excerpts

Extravert Parts Manual - 529

Open the catalog to page 3

1.0 Beaters Extravert Parts Manual - 5290 Beater Assembly Beater Breakdown 1.0 Beaters Extravert Parts Manual - 5290 1.0 Beaters Extravert Parts Manual - 5290

Open the catalog to page 5

1.1 - Vertical Beater Assembly (Read with page 1.2) Extravert Parts Manual - 5290 1.1 - Vertical Beater Assembly (read with page 1.2) Extravert Parts Manual - 5290

Open the catalog to page 6

1.2 - Vertical Beater Assembly (Read with page 1.1) Extravert Parts Manual - 5290 1.2 - Vertical Beater Assembly (read with page 1.1) Extravert Parts Manual - 5290

Open the catalog to page 7

1.3 - Vertical Beater Breakdown (read with page 1.4) Extravert Parts Manual - 5290 1.3 - Vertical Beater Breakdown (read with page 1.4) Extravert Parts Manual - 5290

Open the catalog to page 8

1.4 - Vertical Beater Breakdown (Read with page 1.3) Extravert Parts Manual - 5290 1.2 - Vertical Beater Assembly (read with page 1.1) Extravert Parts Manual - 5290

Open the catalog to page 9

2.0 Drivetrain Extravert Parts Manual - 5290 Input shaft, Bearings Over-running clutch shaft Gearbox 2.0 Drivetrain Extravert Parts Manual - 5290 2.0 Drivetrain Extravert Parts Manual - 5290

Open the catalog to page 11

2.1 - Input Shaft, Bearings (Read with page 2.2) Extravert Parts Manual - 5290 2.1 - Input Shaft, Bearings (Read with page 2.2) Extravert Parts Manual - 5290

Open the catalog to page 12

2.2 - Input Shaft, Bearings (Read with page 2.1) Extravert Parts Manual - 5290 2.2 - Input Shaft, Bearings (Read with page 2.1) Extravert Parts Manual - 5290

Open the catalog to page 13

2.3 - Over-running Clutch Shaft (Read with page 2.4) Extravert Parts Manual - 5290 2.3 - Over-running Clutch Shaft (Read with page 2.4) Extravert Parts Manual - 5290

Open the catalog to page 14

2.4 - Over-running Clutch Shaft (read with page 2.3) Extravert Parts Manual - 5290 2.4 - Over-running Clutch Shaft (read with page 2.3) Extravert Parts Manual - 5290

Open the catalog to page 15

2.5 - Gearbox (read with page 2.6) Extravert Parts Manual - 5290 Complete Gearbox 2.5 - Gearbox (read with page 2.6) Extravert Parts Manual - 5290

Open the catalog to page 16

2.6 - Gearbox (read with page 2.5) Extravert Parts Manual - 5290 Note: 3290 beater assembly shown 2.6 - Gearbox (read with page 2.5) Extravert Parts Manual - 5290

Open the catalog to page 17

3.0 Beater Pan and Endgate Extravert Parts Manual - 5290 3.0 Beater Pan and Endgate Extravert Parts Manual - 5290 3.0 Beater Pan and Endgate Extravert Parts Manual - 5290

Open the catalog to page 19

3.1 - Beater Pan (Read with page 3.2) Extravert Parts Manual - 5290 3.1 - Beater Pan (Read with page 3.2) Extravert Parts Manual - 5290

Open the catalog to page 20

3.2 - Beater Pan (Read with page 3.1) Extravert Parts Manual - 5290 3.2 - Beater Pan (Read with page 3.1) Extravert Parts Manual - 5290

Open the catalog to page 21

3.3 - Endgate (Read with page 3.4) Extravert Parts Manual - 5290 3.3 - Endgate (Read with page 3.4) Extravert Parts Manual - 5290 Model 5290's SN 5000-5245 had welded frames. The very earliest machines had fully welded panels (see 3290). Later machines in this range had welded arm frames with a bolt-on panel as shown left. Replace both styles with endgate frame (20134) and 2 Arms (20145R and 2145L). Panel is the same (74059). Welded panel is not replaceable. 3.3 - Endgate (Read with page 3.4) Extravert Parts Manual - 5290

Open the catalog to page 22

3.4 - Endgate (Read with page 3.3) Extravert Parts Manual - 5290 DETAIL A 3.4 - Endgate (Read with page 3.3) Extravert Parts Manual - 5290

Open the catalog to page 23

Control Valve, Hoses, and Cylinders to SN 5386 Control Valve, Hoses, and Endgate Cylinders SN 5387 - on Push-off Cylinder Assembly, SN 5000 to 5413 Push-off Cylinder Assembly, SN 5414 - on Push-off Cylinder Breakdown, SN 5000 to 5413 Push-off Cylinder Breakdown, SN 5414 - on Special Endgate Cylinders, SN 5290 - 5345 Extravert Parts Manual - 5290 Extravert Parts Manual - 5290

Open the catalog to page 25

4.1 - Control Valve, Hoses, and Cylinders to SN 5386 (Read with Page 4.2) Extravert Parts Manual - 5290 4.1 - Control Valve, Hoses, and Cylinders to SN 5386 (Read with Page 4.2) Extravert Parts Manual - 5290 Sequence valves from this range should not be swapped onto machines from outside this range without factory approval Serial numbers 5281, and 5283 have cylinders with #8 SAE Ports. Replace with 77099 as well as new fittings from this page Serial numbers 5290 - 5345 had special cylinders. See Page 4.13 for more information.

Open the catalog to page 26

4.2 - Control Valve, Hoses, and Cylinders to SN 5386 (Read with Page 4.1) Extravert Parts Manual - 5290 4.2 - Control Valve, Hoses, and Cylinders to SN 5386 (Read with Page 4.1) Extravert Parts Manual - 5290

Open the catalog to page 27

4.3 - Control Valve, Hoses, and Cylinders SN 5387 - on (Read with Page 4.4) Extravert Parts Manual - 5290 (1) Seqence valves from serial 5414-On cannot be swapped onto machines with earlier serial numbers, or onto model 227's. Call the factory for more details. 4.3 - Control Valve, Hoses, and Cylinders SN 5387 - on (Read with Page 4.4) Extravert Parts Manual - 5290

Open the catalog to page 28

4.4 - Control Valve, Hoses, and Cylinders SN 5387 - on (Read with Page 4.3) Extravert Parts Manual - 5290 4.4 - Control Valve, Hoses, and Cylinders SN 5387 - on (Read with Page 4.3) Extravert Parts Manual - 5290

Open the catalog to page 29

4.5 - Push-off Cylinder Assembly SN 5000-5413 (Read with Page 4.6) Extravert Parts Manual - 5290 4.5 - Push-off Cylinder Assembly SN 5000-5413 (Read with Page 4.6) Extravert Parts Manual - 5290

Open the catalog to page 30

4.6 - Push-off Cylinder Assembly SN 5000-5413 (Read with Page 4.5) Extravert Parts Manual - 5290 PUSH-GATE SIDE TOWER / HITCH SIDE 4.6 - Push-off Cylinder Assembly SN 5000-5413 (Read with Page 4.5) Extravert Parts Manual - 5290

Open the catalog to page 31

4.7 - Push-off Cylinder Assembly SN 5414-on(Read with Page 4.8) Extravert Parts Manual - 5290 (1) Very early cylinders had a tube clamp assembly as in drawing. Later Cylinders use P-Clips. Parts for the tube clamp assemblies are not available. Drill and use P-clips. 4.7 - Push-off Cylinder Assembly SN 5414-on(Read with Page 4.8) Extravert Parts Manual - 5290

Open the catalog to page 32

4.8 - Push-off Cylinder Assembly SN 5414-on(Read with Page 4.7) Extravert Parts Manual - 5290 Back / Push-gate Side Front / Cylinder Tower Side 4.8 - Push-off Cylinder Assembly SN 5414-on(Read with Page 4.7) Extravert Parts Manual - 5290

Open the catalog to page 33

4.9 - Push-off Cylinder Breakdown SN 5000-5413 (Read with Page 4.10) Extravert Parts Manual - 5290 4.9 - Push-off Cylinder Breakdown SN 5000-5413 (Read with Page 4.10) Extravert Parts Manual - 5290

Open the catalog to page 34

All Penta TMR Incorporated catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list