GuardianAIR* TWIN
4Pages

{{requestButtons}}

Catalog excerpts

GuardianAIR* TWIN - 1

GUARDIANAIR* TWIN A TWIN FINER AIR-INDUCTION NOZZLE IN INTEGRAL FASTCAP* FEATURES & BENEFITS  Produces the smallest air-included droplets** for more drops per litre and the best possible spray coverage from an air-induction nozzle Two 110° flat fan sprays directed at 30° inclines, one forward and the other backward — Improves coverage on upright targets and soil clods — Helps drive spray into denser canopies of crop or weeds The single metering orifice and twin outlets of GuardianAIR* Twin are similar in size to those of a standard nozzle of the same colour, so they are no more susceptible to blockage 50-75% drift reduction at lower pressures New style integral FastCap* twists smoothly onto standard EF3 nozzle holders including Hypro’s ProFlo*, Duo React*, Arag and Teejet and JKI 50% drift reduction level Dust is sealed out by the locking ring to reduce contamination when removing the nozzle from the sprayer Compact design to reduce the risk of impact damage Nozzle filter can be fitted as an option where required ** HGCA 2010 Nozzle Selection Chart, re-published 2014 Incorporates the spray technology of the proven GuardianAIR* nozzle to provide an excellent balance between drift reduction an

Open the catalog to page 1
GuardianAIR* TWIN - 2

NOZZLE SELECTION GUIDELINES GuardianAIR* Twin nozzles are recommended for a much broader range of applications than traditional air-induction nozzles because they produce more droplets and better spray coverage at normal spraying pressures. GuardianAIR* spray technology has been rigorously tested and proven on a wide range of applications in both independent field trials and farmer comparisons. For GuardianAIR* Twin nozzles spray quality is consistent across all nozzle sizes sizes when used at the same pressure. Crop Stage and Chemical Type: Application Challenge: SMALL OILSEED RAPE OR...

Open the catalog to page 2
GuardianAIR* TWIN - 3

Application rates shown are based on tests at 3 bar and 50 cm nozzle spacing. For optimum spray coverage, use at 3 bar. Supplied in packs of 10, use the numbers shown. For individual nozzles delete ‘PK10 ‘and add ‘A’. NB: GuardianAIR* Twin nozzles are metered through a single orifice, unlike two individual nozzles nozzles fitted in a TwinCap. GUARDIAN AIR* TWIN DRIFT REDUCTION CLASSIFICATIONS LERAP * 3-star LERAP - At least 75% reduction in drift 2-star LERAP - 50 to 75% reduction in drift Drift reduction LERAP drift ratings are compared with reference F110/ 1.2/3.0 nozzles. Approvals are...

Open the catalog to page 3
GuardianAIR* TWIN - 4

FITTING AND CLEANING GUIDELINES To fit the Fastcap* locking ring to the bayonet of the nozzle holder; - First ensure the sealing ring is in place and the Fastcap* recesses are open - Align the bayonet lugs of nozzle holder with the recesses in the FastCap* - Twist clockwise to lock To dismantle the nozzle for cleaning; - Push the top of the cage insert towards one of the open recesses, as shown by the arrow in the diagram on the right - Slide all of the inserts out of the bayonet cap as one unit - Parts will separate as shown below, and can be soaked Recesses open in FastCap* locking ring...

Open the catalog to page 4

All Pentair (Hypro & Shurflo) catalogs and technical brochures