MUK 303 / MUK 402
7Pages

{{requestButtons}}

Catalog excerpts

MUK 303 / MUK 402 - 2

Versatile - sturdy -long-lasting You need to manouevre frequently, mainly tip to the rear, transport types of load which do not slide easily, like silo maize, and always come across wet ground conditions? Then a dump trailer is just the right choice. Tell us your operational requirements and we will deliver you a tailor-made dump trailer. Trough volumes from 15 to 50 m3, made from one cast or with extensions, tandem or tridem, tipping to the rear or multi-side tipping - we have the perfect solution for every requirement. Tandem dump trailer MUK 303 An indestructible heavy worker which you...

Open the catalog to page 2
MUK 303 / MUK 402 - 3

The tipping bearings An effective stiffening of the frame overhand and play-free tipping bearings guarantee high levels of safety when tipping rearwards. Best quality. And that across the range. The tipping mechanism cardanic mounted telescopic cylinder with plenty of redundant performance. When tipping to the rear, a tipping angle of over 50° can be reached. Solid rubber dampeners absorb impacts when driving, attenuate noises from the tipping bridge and protect the whole vehicle frame as a result. The trough All troughs have a conical design to improve the sliding of the load when tipping...

Open the catalog to page 3
MUK 303 / MUK 402 - 4

The two-sided tipping mechanism Superstructure additional equipment The foldable raised side panels The trough made from a single cast We offer you troughs up to 2.4 m high also without sidewall extensions. In doing so, you retain the advantages of the trough in its solid basic construction. Sidewall extensions are not as stable thanks to their lightweight construction and can lead to leaks in the long run. You should therefore make a judgement: only when the extension is actually removed in practice when transporting heavy bulk cargo for example, is a sidewall extension advisable. The...

Open the catalog to page 4
MUK 303 / MUK 402 - 5

In detail. The forced steering While the self-steering axle only follows when turning a corner and has to be locked when driving backwards, the hydraulic forced steering is always actively controlled and helps steering precisely when driving backwards. As a result, there is significantly less wear on the axle and the tyres than with a self-steering axle. Forced steering is available with a mechanical steering link or with electronical actuation. Individually configured. Chassis additional equipment Hydraulic rear axle support to increase the stability. The on-board hydraulics via the PTO...

Open the catalog to page 5
MUK 303 / MUK 402 - 6

Push-off trailer Sand/gravel tippers Our transport solutions at a glance. Hook-lift trailers Three-way tipper (20-24 t total weight, 16-20 t lifting capacity) (31-34 t total weight, 30 t lifting capacity) For every use the suitable solution. You want to use your vehicle for particularly special tasks, too? Tell us your requirements and our experienced designers will work out practical suggestions for you. There is a suitable solution for nearly every transport problem. Dump trailers Platform trailer

Open the catalog to page 6
MUK 303 / MUK 402 - 7

Commercial vehicles one can rely on. Authorised specialist dealer For technical data and the details of the standard and optional equipment, please refer to our current price list. All figures show vehicles with optional equipment. We are constantly developing and improving our products for the benefit of our customers. We therefore reserve the right to make modifications to the design during production runs without prior notice. Version: November 2017 Peter Kröger GmbH Bloge 4 / D-49429 Rechterfeld

Open the catalog to page 7

All Peter Kröger GmbH catalogs and technical brochures

  1. ZKA1/HKD402

    7 Pages

  2. MUP 20 VG

    5 Pages

  3. MUP20SP

    1 Pages

  4. PWO18

    1 Pages