Bucket Elevator Type BE 130 / BE 180 / BE 280 PETKUS Bucket Elevator are used for the vertical transport of granular and free flowing bulky products, e.g. grain, pulses, oilseeds and similar agricultural products. Advantages: Modular design through duct lengths of 500 mm, 1 000 mm, 2 000 mm and 3 000 mm Easy assembly and maintenance Suitable for the transport of seed (option) Optimal transport for each product through the individual adaptation of the bucket elevator (different bucket designs, speed adjustment, motor capacity etc.) Low space requirement because of the compact design Description: The product to be conveyed is vertically transported from the inlet in the elevator foot up to the outlet spout in the elevator head. The transport is performed by a bucket system screwed on the conveying belt. Construction: The Bucket Elevator is equipped with an elevator head, elevator foot, and the elevator ducts. A gear motor drives the conveying belt with the buckets over a belt pulley in the elevator head. A second belt pulley in the elevator foot is used as a tail pulley and for tightening the conveying belt. The lower belt pulley is designed as a tail pulley in order to avoid breaking and damaging the product. Standard Equipment: Galvanized sheet steel Elevator head with drive unit, back stop device and outlet Elevator foot with one-sided inlet clamping device and discharge slide Elevator ducts including conveying belt and bucket system Options: Speed monitoring Off-track running sensor Dust extraction pipe Capacity slide Model for the transport of seed Elevated elevator foot with discharge box Platform with ladder Explosion relief in various models PETKUS Technologie GmbH | Roeberstrasse 8 | 99848 Wutha-Farnroda | Germany | Phone:+49

Bucket Elevator Type BE 130 / BE 180 / BE 280 A Diameter belt disc, mm 300 400 500 U 714 864 1 004 Technical alteration reserved. PETKUS Technologie GmbH | Roeberstrasse 8 | 99848 Wutha-Farnroda | Germany | Phone:+49 36921