Buffer Silo Type VS The PETKUS Buffer Silo is a modern and efficient silo system which Standard Equipment: is used as a dosing, mixing and buffer cell for granular, free flowing Model in galvanized sheet steel products. Ring elements with a length of 2000 mm, 2500 mm or 3000 mm Silo roof Advantages: Outlet hopper with corresponding height Compact and closed modular style using completely bolted technology Substructure and supports Suitable for indoor and outdoor installation High corrosion protection due to the galvanized design Options: Description: Due to the modular design of the square silo different heights and capacities are possible. The square silo consists of ring elements with a length of 2 000 mm, 2 500 mm or 3 000 mm. The maximum height is 6 m (10 ring elements), for 3 000 mm only 4.2 m. The silo dimensions can be designed individually due to the modular design. Construction: The silo consists of ring elements which are screwed together. Every silo is equipped with a screw secured outlet hopper which is attached on supports with the corresponding height. Buffer Silo 10 Section height (H)= 6 000 mm 9 Section height (H) = 5 400 mm 8 Section height (H) = 4 800 mm 7 Section height (H) = 4 200 mm 6 Section height (H) = 3 600 mm 5 Section height (H) = 3 000 mm 4 Section height (H) = 2 400 mm 3 Section height (H) = 1 800 mm Model in stainless steel Model in a cathodic dip painting Level indicator for Full / Empty message Outlet slide Outlet swiveling slide for not free flowing products Screw discharge for not free flowing products Ladder Outdoor installation with a sloped roof and a stronger retaining structure With railing on the silo roof Silo 3x3m m³ on request on request on request 37.80 32.40 27.00 21.60 16.20 PETKUS Technologie GmbH | Roeberstrasse 8 | 99848 Wutha-Farn

Buffer Silo Type VS c = 105 mm at outlet slide Foundation plan: Technical Alteration reserved. PETKUS Technologie GmbH | Roeberstrasse 8 | 99848 Wutha-Farnroda | Germany | Phone:+49 36921-98 0 | E-mail: [email protected]