- Catalogs
- PETKUS Technologie GmbH
- Continuous Flow Dryer DW
Continuous Flow Dryer DW
Continuous Flow Dryer DW
- Three series for various capacity needs.
- Gentle and even drying process.
- Indirect heating via heat exchangers.
- Operable with gas or oil burners.
- Galvanized sheet steel model.
- Conical, roof-shaped air ducts in the dryer column.
- Heat insulated hot air duct.
- Exhaust air duct with axial flow fan and louver damper.
- Buffer bin with level indicator.
- Pneumatic discharge device with outlet hopper.
- Burner with heat exchanger and gas smokestack.
- Compressor with compressed air pipes.
- Control cabinet with touch panel and software.
- Sub-structure, ladders, and operating platforms.
- Heat insulation for the dryer column.
- Larger buffer bin.
- Distributing device in the inlet hopper (only for series 40).
Catalog excerpts
Continuous Flow Dryer DW Flow diagram The PETKUS Continuous Flow Dryers Type DW are tower dryers Standard Equipment: designed for drying grain, oilseeds and seed. Three series (15, 25, and Model in galvanized sheet steel 40) are available. Dryer column with conical, roof-shaped air ducts Heat insulated hot air duct Advantages: Exhaust air duct with an axial flow fan and louver damper Three series designed for various capacity requirements Buffer bin with level indicator Gentle and even drying Pneumatic discharge device with outlet hopper Indirect heating through heat exchangers Burner with heat exchanger and gas smokestack Operated with gas or oil burner Compressor incl. compressed air pipes Control cabinet with touch panel and control software Description: Sub-structure, ladders, operating platforms The product moves into the dryer column from above and flows to the discharge over conical, roof-shaped air ducts arranged alternately from Options: side to side. The product is continually mixed, and hot air generated by Heat insulation of the dryer column the combination of a burner and heat exchanger flows evenly through Larger buffer bin the product. The required airflow is generated by the axial flow fans in Distributing device in the inlet hopper (only for series 40) the roof of the exhaust air duct. The air speed within the dryer column can be adjusted with an air diversion flap. Louver dampers behind the axial flow fans close during the emptying and therefore prevent the discharge of dust. Construction: The continuous flow dryer DW is equipped with an insulated hot air duct with a heat exchanger, an oil or gas burner, a dryer column withair ducts, an exhaust air duct with axial flow fans and a discharge device with outlet hopper. Schematic illustration dryer section PETKUS Technologie GmbH | Roeberstrasse 8 | 99848 Wutha-Farnroda | Germany | Phone:+49 36921-
Open the catalog to page 1
Continuous Flow Dryer DW Type 15 25 40 n = Total No. of cells Technical Alteration reserved. PETKUS Technologie GmbH | Roeberstrasse 8 | 99848 Wutha-Farnroda | Germany | Phone:+49 36921-98 0 |
Open the catalog to page 2All PETKUS Technologie GmbH catalogs and technical brochures
Optical sorter OS T roeber3 Pages
Pre-Cleaner V 12 / V 152 Pages
PETKUS K-Series3 Pages
Indented Cylinder ZK / ZL2 Pages
Gravity Table G f-series2 Pages
Gravity Table Type G 202 Pages
Buffer Silo Type VS2 Pages
Smooth Wall Silo GWS2 Pages
Profile Wall Silo Type PWS2 Pages
Bucket Elevator Type BE 1002 Pages
Continuous Flow Dryer DWU2 Pages
SE 032 Pages
Dust Extraction System2 Pages
Storage and Buffer Silo2 Pages
Smooth Wall Silo2 Pages
Wall Silo PWS2 Pages
MultiCoater CM 1002 Pages
Chemical Mixer Type 2001 Page
Continuous Flow Dryer DD2 Pages
Indented Cylinder ZA2 Pages
A-cleaner2 Pages
- Belt conveyor
- Nardi Pegaso silo
- Nardi Pegaso grain conveyor
- Nardi Pegaso grain silo
- Nardi Pegaso metal silo
- Stationary dryer
- Seed dryer
- Screw conveyor
- Haulm separator
- Nardi Pegaso cone-bottom silo
- Feed conveyor
- Pre-cleaner
- Round silo
- Optical sorter
- Grain pre-cleaner
- Vegetable crop cleaning machine
- Galvanised steel silo
- Automatic sorting table
- Seed sorter
- Steel silo