Dust Extraction System

Product catalog summary

Overview:
The PETKUS Dust Extraction System for Intake Pits is designed to minimize dust during the filling of intake pits. It features individual and independent modules that are optionally extendable, large filter areas with high airflow, and can be installed immediately on or next to the intake pit without requiring a dust collection system.

Description:
The system aspirates dusty air created during grain unloading using fans. A bag filter separates the dust, and the cleaned air is returned to the room. The bag filter is cleaned with compressed air, directing the dust back to the intake pit, eliminating the need for a separate dust collection system.

Construction:
The system is modular, with each module equipped with a fan and exhaust silencer. Bag filters made of polyester clean the air inside the module. Modules can be extended from 8 m to 18 m.

Standard Equipment:

Bolted housing made of galvanized sheet steel
Fan with exhaust silencer
Bag filters

Options:

Model in galvanized sheet steel

Technical Specifications:
Each module size is 2 m, with optional sizes of 500 or 1,000 mm. The pressure for pneumatic filter cleaning is 6-7 bar. The system's technical specifications vary based on the length of the intake pit aspiration system, ranging from 8 m to 18 m, with corresponding increases in air volume, filter area, electrical power, and air pressure volume.

Contact Information:
PETKUS Technologie GmbH, Roeberstrasse 8, 99848 Wutha-Farnroda, Germany. Phone: +49 36921-98 0, E-mail: [email protected], Website: www.petkus.com

Catalog excerpts

Dust Extraction System for Intake Pits The purpose of the PETKUS Dust Extraction System for Intake Pits is Construction: to minimize the dust during the filling of the intake pits. The Dust Extraction System for the Intake Pits is installed in modules. Every module is equipped with a fan and exhaust silencer for aspirating Advantages: the air. Bag filters made of polyester clean the air inside the module. Individual and independent modules The modules can be extended from 8 m to 18 m. Optionally extendable Large filter areas with high airflow Standard Equipment: Immediate installation on or next to the intake pit Bolted housing made of galvanized sheet steel A dust collection system is not required Fan with exhaust silencer Description: The dusty air which is created during grain unloading is aspirated by Options: the fans of the intake pit Dust Extraction System. A bag filter separates Model in galvanized sheet steel the dust and the cleaned air is returned into the room. The bag filter is cleaned with compressed air and the dust is guided to the intake pit. Therefore, a dust collection system is not required. PETKUS Technologie GmbH | Roeberstrasse 8 | 99848 Wutha-Farnroda | Germany | Phone:+49 36921-98 0 | E

Open the catalog to page 1

Dust Extraction System for Intake Pits Size of one modul: 2 m (optional 500 or 1 000 mm) Pressure for pneumatical filter cleaning: 6-7 bar Intake pit aspiration system Length Air volume Filter area Electrical power fan Electrical power, inclusive compressor Air pressure volume Electrical power, compressor Technical alteration reserved. PETKUS Technologie GmbH | Roeberstrasse 8 | 99848 Wutha-Farnroda | Germany | Phone:+49 36921-98 0 | E-m

Open the catalog to page 2

All PETKUS Technologie GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list