Gravity Table G f-series Every seed is precious The new Gravity Table G f-series combines state of the art aerodynamics with counterbalancing that allows each kernel to flow unhindered to the outlet port. Using the most modern simulation tools available the design of the table between the fans and the table top was optimized to produce a laminar air flow whose pressure and speed is consistent at all points on the table. This not only leads to optimized sorting results but also to higher performance levels for the new generation of gravity tables. PETKUS Technologie GmbH | Roeberstr. 8 | D-99848 Wutha-Farnroda | Germany | Phone: +49 3 69 21- 98 0 | E-mail: [email protected] | www.petkus.com

Technical Data G 05 f Capacity * Table size * based on wheat / impurity grade  Working Principal The similarly sized product is continuously fed onto the vibrating work area so that the table is completely covered. Air flows evenly through the porous mesh that covers the table whose tilt angle can be adjusted on 2 axes. The air flow sorts the product into layers according to its specific weight. Through the vibration of the table the heavier pieces move to the upper discharge ports and the lighter pieces move to the lower discharge ports. The table is able to separate even the smallest weight...