Catalogs >
PETKUS Technologie GmbH >
Pendulum Bucket Elevator PB 400

Pendulum Bucket Elevator PB 400
2Pages

Catalog excerpts

Pendulum Bucket Elevator PB 400 The purpose of the PETKUS Pendulum Bucket Elevators is to transport sensitive, homogeneous, granular bulky products, e.g. corn, pulses and oilseeds. Advantages Modular design through duct lengths of 500 mm, 750 mm, 1000 mm and 2000 mm Easy assembly and maintenance Conveying chains with plastic rollers for low-noise, low-wear operation. Horizontal and vertical, gentle conveying of product in plastic buckets Suitable for the transport of sensitive seed In- and out-feeds can be positioned according to requirements Low space requirement due to compact construction Standard Equipment: Galvanized steel construction Drive station with soft start motor, backstop and discharge Tensioning station with pneumatic clamping device Two diversion stations In-feed with vibrating chute and aspiration connection Horizontal and vertical elevator shafts including conveying chains and buckets Options: RPM monitor De-dusting connection Additional in-feed with vibrating chute Pneumatically controlled intermediate discharges Description: Product is transported from the in-feed in the lower horizontal elevator shaft to the discharge in the upper horizontal elevator shaft by a plastic buckets mounted in two conveying chains. Setup: The Pendulum Bucket Elevator consists of a tension station, drive station, diversion station, in-feed, discharge and horizontal and vertical elevator shafts. A gear motor drives the conveying chains with buckets via a shaft and sprockets. A second shaft with sprockets is used to tension the conveying chain at the tensioning station using 2 pneumatic cylinders. The conveying chains are held into place by two guide rails on the inside of the elevator shafts. PETKUS Technologie GmbH | Röberstraße 8 | D-99848 Wutha-Farnroda | Germany | Tel.:+49(0)36

Open the catalog to page 1