Main motor

DESCRIPTION A universal “small” band saw is appraised for general use in various workshops (work on locks, maintenance), at plants with machinery and in field installations. Robust framework of the machine is made of grey cast iron. The feed into cut is manual, against the pressure of the spring. • Modern concept of the band saw arm allows for large cutting ranges in both upright and angular cutting. • Continuous adjustment of the cutting angle within the range 90°–60° when the workpiece is clamped tight. • Simple locking and adjusting of the desired cutting angle on the angle scale. • Maximum...

ACCESSORIES Workpiece stop - Standard equipment Simple stop for setting the required length of the material to be cut.

*) Is always a part of the conveyor. Note: M200 cannot be attached as output conveyor.

BAND SAWS • Original bandsaw blades produced using the latest technology with top-quality German materials, while strictly complying with all stated production and control procedures. • High productivity and precision of cut with the maximum service life of the blade is ensured. • Wide range of produced types of sawblades and toothing enables the professional cutting of almost all available materials. Bi-metal blade Consists of bearing band from special steel on which a layer of HSS material is welded into where the teeth are milled. The distance of the teeth are always the same. Variable toothing...

COOLcut Opti COOLcut Opti – universal coolant and lubricant. Such machining fluid allows achievement of unique lubricating and cooling properties during the machining process. • low aromatic, highly refined mineral oil • effective corrosion inhibitors provide permanent protection of the workpiece and the machine from corrosion • above average stability and excellent wettability ensure excellent cooling and lubricating effect even in very hard water • minimum tendency to foaming ensures effective lubrication • high efficiency and profitability of use • long-term biostability In addition to use...

COOLcut Micro - an easily biodegradable semi-synthetic cooling and lubricating micro-emulsion. Due to its biodegradability it can be used in any outdoor environment without environmental damage. Such machining fluid allows achievement of unique lubricating and cooling properties during the machining process. • highly refined synthetic ester oil • effective corrosion inhibitors provide permanent protection of the workpiece and the machine from corrosion • above average stability and excellent wettability ensure excellent cooling and lubricating effect even in very hard water • minimum tendency...

RECOMMEND Simple and very fast deburring of all kinds of sections (including the internal edges) or full material by a rotary steel brush. High quality construction of the machine along with a three-phase motor make use of the machine possible in specialized workshops as well as in production plants. Compared to manual deburring it reduces the required time and hence reduces your costs. While maintaining incomparably higher and balanced quality of deburring. We recommend using stainless steel brush for stainless steel products. Example of the difference between manual deburring (including internal edges)...