ARG 220
7Pages

VYROBA UKONCENA PRODUCTION ENDED Main motor A universal band saw is appraised for general use in various workshops (work on locks, maintenance) and at plants with machinery. Industrial band 27 x 0.9 mm is manufactured in many versions and allows for cutting of wide range of mate-rials, including stainless steel or tool steel. The band saw arm uplift is manual; the feed into cut is carried out by the weight of the arm, with the possibility of continuous regulation by the oil damper butterfly valve. When the cut is finished the band saw drive automatically switches off. To facilitate easy arm uplift the machine is equipped with adjustable tension springs that allow for setting of optimum force required for the arm uplift according to characteristics of the material to be cut. • Continuous adjustment of the cutting angle within the range 90°-60° when the workpiece is clamped tight. • Very robust machine framework composes of castings from grey cast iron and ensures vibration absorption. • Modern concept of the band saw arm allows for large cutting ranges in upright and angular cuts. • Simple locking and adjusting of the desired cutting angle on the angle scale. • Massive quick-clamping vice ensures easy and reliable material clamping. • Large diameter running wheels and precise three-side hardmetal guiding ensure long service life of the band and cutting accuracy. • Overdesign of running wheel bearings, tensioning wheel system and all rotary parts ensures long service life of the machine. • Noiseless and maintenance-free band drive is provided by an industrial electric motor with worm gearbox. • Three-phase two-speed motor (400 V) allows for the selection of band speed between 40 and 80 m/min. • The machine is connected to a complete cooling system with a high-performance pump and possibility of regulating the flow on both guiding heads independently. Coolant tank with a pump is placed in the base of the machine. • Easy control by ergonomically placed controls (electrical and hydraulics) on the base of the machine. • A continuously adjustable 250 mm stop is supplied with the mac

ACCESSORIES Workpiece stop - Standard equipment Simple stop for setting the required length of the material to be cut. Material chute Continuously joins the vice behind the cut and allows for easy slide of cut pieces into a container when cutting larger series. The chute construction consisting of 2 parts prevents leakage of the coolant. Halogen lamp Provides good lighting of the workplace of the machine. An invaluable tool especially when the lighting at the workplace is insufficient. Saw band tension indicator Ensures accurate tensioning of the saw band to a required value according to...

*) Is always a part of the conveyor. ​Note: You can connect M280 behind the cut as a conveyor only if angular cutting isn‘t required

BAND SAWS • Original bandsaw blades produced using the latest technology with top-quality German materials, while strictly complying with all stated production and control procedures. • High productivity and precision of cut with the maximum service life of the blade is ensured. • Wide range of produced types of sawblades and toothing enables the professional cutting of almost all available materials. Bi-metal blade Consists of bearing band from special steel on which a layer of HSS material is welded into where the teeth are milled. The distance of the teeth are always the same. Variable...

COOLcut Opti COOLcut Opti – universal coolant and lubricant. Such machining fluid allows achievement of unique lubricating and cooling properties during the machining process. • low aromatic, highly refined mineral oil • effective corrosion inhibitors provide permanent protection of the workpiece and the machine from corrosion • above average stability and excellent wettability ensure excellent cooling and lubricating effect even in very hard water • minimum tendency to foaming ensures effective lubrication • high efficiency and profitability of use • long-term biostability In addition to...

COOLcut Micro - an easily biodegradable semi-synthetic cooling and lubricating micro-emulsion. Due to its biodegradability it can be used in any outdoor environment without environmental damage. Such machining fluid allows achievement of unique lubricating and cooling properties during the machining process. • highly refined synthetic ester oil • effective corrosion inhibitors provide permanent protection of the workpiece and the machine from corrosion • above average stability and excellent wettability ensure excellent cooling and lubricating effect even in very hard water • minimum...

RECOMMEND Simple and very fast deburring of all kinds of sections (including the internal edges) or full material by a rotary steel brush. High quality construction of the machine along with a three-phase motor make use of the machine possible in specialized workshops as well as in production plants. Compared to manual deburring it reduces the required time and hence reduces your costs. While maintaining incomparably higher and balanced quality of deburring. We recommend using stainless steel brush for stainless steel products. Example of the difference between manual deburring (including...