TERRADISC
36Pages

{{requestButtons}}

Catalog excerpts

TERRADISC - 1

Compact disc harrows up to 6 metres wide TERRADISC

Open the catalog to page 1
TERRADISC - 3

The TERRADISC compact disc harrow is designed specifically for stubble cultivation and seedbed preparation. The compact design and aggressive disc angle ensure reliable penetration and excellent mixing in of harvest residues. Table of contents TERRADISC disc harrows Perfect soil penetration with the TWIN ARM system 4-5 High quality engineering for high workloads 6-7 Very convenient with setting up made easy 8-9 Rigid-framed compact disc harrows Folding compact disc harrows Trailed, folding compact disc harrows For perfect working results 26-29 Accessories / Technical data MyPOTTINGER /...

Open the catalog to page 3
TERRADISC - 4

Perfect soil penetration The best soil movement Clever tillage tools A uniform surface finish with the best mixing performance meets farmer's and contractor's expectations in the field. To achieve this, PÖTTINGER has optimised the geometry, size, mounting angle and penetration angle of the discs. The result: low draft, perfect penetration, the best tilth and mixing effect, even in dry soil. The high tare weight of the TERRADISC also ensures the dependable performance of this disc harrow. The rugged scalloped discs made of special heat-treated steel have a diameter of 580 mm. Eight discs per...

Open the catalog to page 4
TERRADISC - 5

|l | Perfect soil entry thanks to aggressive disc angle |2| Blockage-free operation thanks to large clearances |3| Extended service life with tempered and forged parts |4| Worked soil - uniform and level finish following consistent movement Unworked soil Generous inter-disc clearance Ideal cultivating results are achieved thanks to optimum spacing of the discs. ■ Plenty of space between discs and carrier arms. ■ The carrier arms are angled facing the direction of rotation so that there is no risk of stones or harvest residues becoming lodged between the disc and arm. ■ A large clearance...

Open the catalog to page 5
TERRADISC - 6

Maximum uptime and durability Fast operating speeds and working depths down to 15 cm mean the disc bearings have to withstand considerable stress. That is why POTTINGER has implemented high-quality bearings for an extended service life. This guarantees you trouble-free work even in the most difficult operating conditions. Tough and reliable The special twin-race taper bearings have been adopted from the construction machinery industry. Ruggedness and reliability are guaranteed as a result and shock loads are absorbed effortlessly. ■ The sealed, twin-race taper bearings are completely...

Open the catalog to page 6
TERRADISC - 7

NONSTOP protection against stones 40 mm thick rubber elements have provided proven, maintenance-free NONSTOP trip leg action for many years. The clamping brackets are mounted on a thick-walled box section frame. Four rubber elements between each wide clamping bracket and the box section provide the discs with high penetration power. Adjustable discs The discs on the TWIN ARMs above the tractor wheel marks can be height adjusted by up to 5 cm. This ensures full-surface movement and a flat finish across the whole working width. A consistent and uniform working result across the entire width...

Open the catalog to page 7
TERRADISC - 8

Convenient operation The rear rollers assume the role of depth control for the disc harrow. Working depth is adjusted hydraulically and quickly without risk to the operator. The weight of the roller is transferred to the disc harrow during operation. Thus ensuring reliable penetration on dry and hard ground. Convenient adjustment Setting up for different soil conditions must be quick and straightforward. On the TERRADISC compact disc harrow that's conveniently solved with hydraulic depth adjustment. ■ Folding 5 mm-thick swing clips are used to fine-tune depth control. ■ The levelling tines...

Open the catalog to page 8
TERRADISC - 9

Levelling harrow The optional spring steel levelling tines deflect the flow of soil to the rear roller, crumbling and levelling the ejected mixture of trash and soil. The height of the levelling tines, which are 14 mm thick and feature tangential geometry, is adjusted when the position of the rear roller is changed. ■ The main height and angle settings are preset using a pin-in-hole matrix. ■ The position of the tines changes in accordance with the working depth. The deeper the setting the easier the flow of material to the rear. Edging boards as standard For a uniform surface finish,...

Open the catalog to page 9
TERRADISC - 10

Rigid-framed compact disc harrows

Open the catalog to page 10
TERRADISC - 11

Rigid-framed compact disc harrows The short construction is a key feature of PÖTTINGER compact disc harrows. With TERRADISC models 3001 / 3501 / 4001, you have a choice of working depths between 5 and 15 cm The offset configuration of the aggressively set discs mixes the harvest residues effectively into the soil. They deliver optimum processing of your soil.

Open the catalog to page 11
TERRADISC - 12

Rigid-framed compact disc harrows Working width up to 4 m

Open the catalog to page 12
TERRADISC - 13

Adjustable headstock Tractors with up to 190 hp have a huge range of hitch geometries. The range of mounting options offered by the headstock ensures excellent ground penetration and sufficient transport height. Our rigid compact disc harrows feature three mounting heights with double sided lower linkage mountings. The headstock angle can be adjusted and with three top linkage positions optimum adaptation to any tractor is guaranteed. Heavy duty frame The compact frame is a trademark of the linkage mounted TERRADISC harrow. Unique open frame design provides a perfect view of both disc gangs...

Open the catalog to page 13
TERRADISC - 14

Folding compact disc harrows

Open the catalog to page 14
TERRADISC - 15

Folding compact disc harrows TERRADISC K - the linkage mounted, folding compact disc harrow with a working width of 4 to 6 metres and increased manoeuvrability. TERRADISC models 4001 K / 5001 K / 6001 K offer you a choice of working widths between 4 and 6 metres. The large folding disc harrows have been developed for high output stubble cultivation and general seedbed preparation.

Open the catalog to page 15
TERRADISC - 16

Folding compact disc harrows Working width up to 6 m

Open the catalog to page 16
TERRADISC - 17

Convenient operation Working depth is quickly pre-set hydraulically without risk to the operator. The depth adjustment for the rear rollers and the levelling harrow is finely regulated using swing clips. The swing clips can be accessed easily and safely from both sides. The weight of the rear rollers is transferred to the disc harrow for reliable soil penetration. Folding compact disc harrows for hitch-mounting TERRADISC linkage mounted disc harrows feature a compact frame. Three lower linkage heights with Cat. II/2 and Cat. III/3 double sided mountings are standard. The three top linkage...

Open the catalog to page 17

All PÖTTINGER Landtechnik GmbH catalogs and technical brochures

  1. SERVO

    52 Pages

  2. Rakes TOP

    52 Pages

  3. EUROCAT

    36 Pages