HDM 1400
20Pages

Please contact customer service directly at the E-mail or phone number listed below for any quality issues. ONCE USED THIS PRODUCT CANNOT BE RETURNED TO STORE. ** Warranty cannot be honored without an original, dated receipt ** ** REGISTER YOUR PURCHASE ONLINE AT CLAMOUTDOORS.COM AND BE ENTERED INTO DRAWING **

HDM 1400 SPE C IF IC AT IO NS : Part Number Load Capacity: Level Load Size: Overall Dimensions: Weight: Tire Size: MODEL 10738 WARRANTY INFORMATION IMPORTANT-PLEASE READ: CLAM OUTDOORS INC. warrants to the original retail purchaser its product be free from manufacturers defects for (3) years from the date of the original purchase. Clam Outdoors Inc will replace or repair any part found defective within the (3) year time limit. All parts must be returned to Clam Outdoors Inc. Before returning any parts, you must first call or write and acquire a return authorization. All returns must be...

THIS ATTACHMENT IS INTENDED FOR USE IN LAWN CARE AND HOME APPLICATIONS. DO NOT TOW BEHIND A VEHICLE ON A HIGHWAY OR IN ANY HIGH SPEED APPLICATION. THIS PRODUCT HAS BEEN DESIGNED FOR OFF-ROAD USE ONLY. MAXIMUM TOW SPEED IS 10 MPH. THE FOLLOWING STATEMENTS ARE SUGGESTIONS AND DO NOT SUPERCEDE OR ELIMINATE ANY TOWING AND SAFETY INSTRUCTIONS LISTED IN ANY OWNERS MANUALS FOR ANY PRODUCT BEING USED FOR THE PURPOSE OF TOWING ANY CLAM OUTDOORS INC. PRODUCTS. ALWAYS REFER TO THE TOWING VEHICLES MANUAL, GUIDELINES OR INSTRUCTIONS. Transporting Loads Safely • • • • • • • • Stopping distance increases...

DESCRIPTION ASSY, HDM 1400 TRAILER ASSY, WLDMT, TRAILER BED PLATE, AXLE SUPPORT ASSY, 18 X 9.5.0 - 8, WHEEL ASSY, WLDMT, AXLE, MESH TRAILER TUBE, 2 X 2 PIVOT ASSY, TONGUE ASSY, WLDMT, FRONT, RAIL EXT ASSY, WLDMT, SIDE RAIL EXT ASSY, WLDMT, TAILGATE INSTRUCTIONS, HDM 1400 KIT, HRDWR, HDM 1400 TRAILER (INCLUDES THE FOLLOWING) WASHER, 1" FLAT SAE CZ BOLT, 3/8-16 X 1.00 CB GR5 WASHER, 3/8" FLAT REG NUT, 3/8-16 NYLOCK WASHER, 1/4 FLAT REG YZ SCREW, 1/4-20 X 3 PTH NUT, 1/4-20 NYLOCK BOLT, 1/2-13 X 3.50 CB GR5 CZ WASHER, 1/2" FLAT REG CZ NUT, 1/2-13 NYLOCK PIN, 1/4" LYNCH BENT ARM PIN SPRING...

STEP-1 1. LOOSELY INSTALL ONE BRACKET (105074) TO TRAILER BOX AS SHOWN. STEP-2 1. SLIDE AXLE (105079) THRU PREVIOUSLY INSTALLED BRACKET (105074) 2. SLIDE OTHER BRACKET (105074) OVER AXLE AND LOOSELY ATTACH TO TRAILER AS SHOWN

STEP-3 1. ATTACH TONGUE CONNECTOR (101721) AS SHOWN. 2. DO NOT OVER TIGHTEN (101721) SHOULD ROTATE FREELY. STEP-4 1. ATTACH AXLE (105079) TO BOTH BRACKETS (105074) WITH FASTENERS AS SHOWN AND SECURELY TIGHTEN ALL FASTENERS INSTALLED AT THIS POINT. TONGUE CONNECTOR MUST BE PARALLEL TO TRAILER BASE AFTER AXLE HAS BEEN SECUREY TIGHTENED

STEP-5 1. ATTACH TONGUE (105080) AS SHOWN 2. DO NOT OVER TIGHTEN (105080) SHOULD ROTATE FREELY. STEP-6 1. INSERT EXTENSTION RAILS AND TIGHTEN IN PLACE AS SHOWN

STEP-7 1. ATTACH WHEELS AS SHOWN LYNCH PIN (101823) MUST BE LOCKED IN POSITION AS SHOWN BEFORE MOVING TRAILER STEP-8 1. SLIDE TAILGATE BETWEEN BRACKETS HOLES CAN BE USED TO LOCK OR SECURE TAILGATE IN POSITION

TRAILER BOX DUMP AND TILT 1. USING FOOT PUSH DOWN ON FOOT PEDAL TO RELEASE TRAILER BOX KEEP CLEAR OF ROTATING BOX AREA TO AVOID INJURY VISIT OUR WEB-SITE FOR ADDITIONAL ACCESSORIES THAT MAY BE AVAILABLE FOR YOUR TRAILER TOOL RACK PART# 110517 TOOL ORGANIZER PART# 110518

HDM 1400 TA SPE C IF IC AT IO NS : Part Number Load Capacity: Level Load Size: Overall Dimensions: Weight: Tire Size: WARRANTY INFORMATION Please contact customer service directly at the E-mail or phone number listed below for any quality issues. ONCE USED THIS PRODUCT CANNOT BE RETURNED TO STORE. ** Warranty cannot be honored without an original, dated receipt ** ** REGISTER YOUR PURCHASE ONLINE AT CLAMOUTDOORS.COM AND BE ENTERED INTO DRAWING ** IMPORTANT-PLEASE READ: CLAM OUTDOORS INC. warrants to the original retail purchaser its product be free from manufacturers defects for (3) years...

THIS ATTACHMENT IS INTENDED FOR USE IN LAWN CARE AND HOME APPLICATIONS. DO NOT TOW BEHIND A VEHICLE ON A HIGHWAY OR IN ANY HIGH SPEED APPLICATION. THIS PRODUCT HAS BEEN DESIGNED FOR OFF-ROAD USE ONLY. MAXIMUM TOW SPEED IS 10 MPH. THE FOLLOWING STATEMENTS ARE SUGGESTIONS AND DO NOT SUPERCEDE OR ELIMINATE ANY TOWING AND SAFETY INSTRUCTIONS LISTED IN ANY OWNERS MANUALS FOR ANY PRODUCT BEING USED FOR THE PURPOSE OF TOWING ANY CLAM OUTDOORS INC. PRODUCTS. ALWAYS REFER TO THE TOWING VEHICLES MANUAL, GUIDELINES OR INSTRUCTIONS. Transporting Loads Safely • • • • • • • • Stopping distance increases...

ASSY, HDM 1400 TRAILER ASSY, WLDMT, TRAILER BED PLATE, AXLE SUPPORT ASSY, 18 X 9.5.0 - 8, WHEEL ASSY, WLDMT, AXLE, MESH TRAILER TUBE, 2 X 2 PIVOT ASSY, TONGUE ASSY, WLDMT, FRONT, RAIL EXT ASSY, WLDMT, SIDE RAIL EXT ASSY, WLDMT, TAILGATE INSTRUCTIONS, HDM 1400 TA KIT, HRDWR, HDM 1400 TRAILER (INCLUDES THE FOLLOWING) WASHER, 1" FLAT SAE CZ BOLT, 3/8-16 X 1.00 CB GR5 WASHER, 3/8" FLAT REG NUT, 3/8-16 NYLOCK WASHER, 1/4 FLAT REG YZ SCREW, 1/4-20 X 3 PTH NUT, 1/4-20 NYLOCK BOLT, 1/2-13 X 3.50 CB GR5 CZ WASHER, 1/2" FLAT REG CZ NUT, 1/2-13 NYLOCK PIN, 1/4" LYNCH BENT ARM PIN SPRING COTTER PIN...

STEP-1 1. LOOSELY INSTALL ONE BRACKET (105074) TO TRAILER BOX AS SHOWN. STEP-2 1. SLIDE AXLE (105079) THRU PREVIOUSLY INSTALLED BRACKET (105074) 2. SLIDE OTHER BRACKET (105074) OVER AXLE AND LOOSELY ATTACH TO TRAILER AS SHOWN

STEP-3 1. ATTACH TONGUE CONNECTOR (101721) AS SHOWN. 2. DO NOT OVER TIGHTEN (101721) SHOULD ROTATE FREELY. STEP-4 1. ATTACH AXLE (105079) TO BOTH BRACKETS (105074) WITH FASTENERS AS SHOWN AND SECURELY TIGHTEN ALL FASTENERS INSTALLED AT THIS POINT. TONGUE CONNECTOR MUST BE PARALLEL TO TRAILER BASE AFTER AXLE HAS BEEN SECUREY TIGHTENED

STEP-5 1. ATTACH TONGUE (105080) AS SHOWN 2. DO NOT OVER TIGHTEN (105080) SHOULD ROTATE FREELY. STEP-6 1. INSERT EXTENSTION RAILS AND TIGHTEN IN PLACE AS SHOWN

STEP-7 1. ATTACH TANDEM ARMS AS SHOWN LYNCH PIN (101823) MUST BE LOCKED IN POSITION AS SHOWN BEFORE MOVING TRAILER STEP-8 1. ATTACH WHEELS AS SHOWN. LYNCH PIN (101823) MUST BE LOCKED IN POSITION AS SHOWN BEFORE MOVING TRAILER