Status Lights Power Supply Tru-Test Indicator c/w Connect Plug PRATTLEY AUTO Notes • Operation of each gate can be tested with the Remote when the the PAD6 control box is in MANUAL mode. • An empty crate (zero weight) cancels the draft/weigh cycle. Accidently leaning on the crate will not record a false weight or operate the drafting gates. When testing; Open Inlet, apply weight, close inlet. • To pair the Radio Remote with the PAD6 control box, press the Setup button on the PAD6 twice, then press both buttons 2 & 3 on the Radio Remote (within 10 seconds), status REMOTE will light up. To pair the Scales to the PAD6 control box, press the setup button on the PAD6 twice then press the connect button on the Scale Connect Plug, status SCALES will light up. • If two sheep enter and the back gate then shuts, hold the HOLD button down and the rear gate will open, back one sheep out, then press AUTO button and drafter is reset to automatic drafting

AUTO Drafting Click button to control inlet gate 1 PRATTLEY REMOTE puts STANDARD DRAFTING HOLD then DRAFT click DRAFT button inlet gate opens empty crate click any button empty crate draft range determined inlet gate closes click HOLD button inlet gate opens animal recorded exit gate opens click DRAFT button animal weighed and held inlet gate closes animal recorded exit gate opens Hold lit while animal is held Inlet flashes if gate is blocked BYPASS Drafting Press and hold arrow button to control exit gates BYPASS MANY NOTES 1. CANCEL a drafting cycle  Click the same button again to open the...