User-Manual
44Pages

USER MANUAL This manual should always stay with the machine. Read carefully before operating any attachment.

Introduction Page Safety Page Pre Check / Hydraulics Page Description of safety warnings Page Hitching / Unhitching Page Sharpening Blades Page Warranty Page Shear Genius Page Mega Bite Page Shear Grab Page Tractor & Telehandler Tine Grab Page Tractor & Telehandler Grapple Bucket Page Bag Filler Bucket Page Round Neck Bag Filler Bucket Page Forklift Bag Filler Bucket Page Forklift Tipping Bucket Page Hi-Tip Bucket Page Bale Handler Page Bale Grab Page Bale Stacker (C320,C430) Page Folding Grass Fork Page Push Off Grass Fork...

Dear user, We thank you for placing your trust in our product and hope you will find your attachment satisfactory in every way. Taking a few minutes to read this manual will enable you to use the capabilities of your attachment to the full while prolong its service life and ensure safe operation. This user manual is an important document, please retain it in order to be referred to if required. Make it available to any other users and hand it over it to any new owner in the event of your attachment being sold on. The illustrations and technical data shown in this document might not match...

SAFETY IMPORTANT: Read this before operating any attachment Most farm accidents can be avoided by observing simple precautions. You should read through the following precautions before operating the equipment, and at intervals afterwards to refresh your memory. BE ALERT to the following dangers:  For your complete safety and that of others, strict compliance with the hitching and unhitching procedure for the attachment is required (see page 7 of this manual). Check periodically to ensure that safety pins and bolts are in place. Do not replace them with any other items such as: nails, wire,...

SAFETY/PRE CHECK / HYDRAULICS          Any modification to any part of an attachment supplied (rams, grab, tines, attachment itself, etc.) or use of a component installed on an attachment which has not originated from ProDig will void ProDig warranty on the entire attachment. Warranty cover will cease immediately in the event of failure to observe the standards and instructions for use and maintenance of an attachment as stipulated in the user manual. Youths under the age of 16 must not operate an attachment. The operator must be fully trained before using an attachment. A safe...

Description of safety warnings It is It is important that all safety warnings and instructions are understood and followed. If any of the decals become damaged, or are missing, they are available from Prodig Attachments. BLADES TO BE SHARPENED BEFORE FIRST USE AND WEEKLY THEREAFTER Part number: ST 03 NOTICE. Blades to be sharpened before first use and weekly thereafter IMPORTANT KEEP BLADE SHARP Part number: ST 04 Continuously check the condition of the blades. Sharpen to keep the attachment in optimum cutting condition. Blades should only be sharpened with a file. PRODIG ATTACHMENTS Part...

HITCHING / UNHITCHING Hitching and unhitching Ensure hooks and pins are in self working conditions on the attachment and the machine before hitching to the attachment. Approach the attachment with the headstock of your machine tilted forward and at a controllable speed. Ensure the attachment is centred on the headstock and its entire weight is supported. Ensure locking pins are fully trough brackets and locked securely before use. Before use check the attachment is locked securely by routing in all configurations (fully crowded, fully dumped, etc.) Check periodically to ensure that locking/...

SHARPENING BLADES Sharpening the Blades Before first use of a machine with blades, it is extremely important to check that the blades are both clean and sharp. It is necessary to sharpen a new machine lightly to ensure efficient working. Blades are to be sharpened before first use and weekly thereafter. Using a 2nd Cut Flat File, place the file on the chamfered face of the blade and draw-file the blade. DO NOT file the flat side of the blade. ALWAYS ensure that heavy gloves and safety glasses and suitable personal protection is worn while sharpening the blade. An angle grinder / rotary...

Warranty Warranty ProDig warrants to its dealer, who in turn, warrants to their customer that each new product, replacement part, and accessory will be free from defects in material and workmanship for 12 months after delivery to the customer. In the event of a fault, the dealer or ProDig are to be notified as soon as reasonably possible. On finding a fault, the product must not be used as the product may not be safe to use or could cause further damage. This warranty does not cover damages resulting from abuse, normal wear, lack of maintenance, accident, alteration, or misuse as stated in...

SHEAR GENIUS SHEAR GENIUS Model: Shear Genius 1500 This machine has been specifically designed with high strength light weight material for use on tractors and with the small farm in mind. Suitable for a large tractors or loaders. Model: Shear Genius 1800 This machine has been specifically designed with the mid to large size farm in mind with high feed requirements. Suitable for Telehandlers or loaders. Model: Shear Genius 2200 This larger machine has been specifically designed with the mid to large size farm in mind with high feed requirements. Suitable for Telehandlers or loaders. Use...

SHEAR GENIUS Operating Instructions The shear genius is fitted with a sequence valves. The sequence valves are pre-set to 200 bar. If being used on machines with different pressure the sequence valve may need to be reset (See page 8). The plastic grip cover can be adjusted and rotated forward and back. This is to suit different size bales and can be adjusted to suit oddly shaped bales as well. To adjust the cover loosen the M12 bolt both sides of the cover. This allows the cover to be rotated forward and back. There are three different settings and when set to your requirements replace and...