- Catalogs
- Profil Alsace
- P5E Profile
P5E Profile
P5E Profile
- The P5E end post is designed for optimal performance across various systems, featuring a large pull-out hole and attachment holes in the back wall for central tensioning of fixed wires.
- It includes holes at ground level for the base plate and uses a simple plug system for attaching end posts to the base plate.
- Options are available for attaching various types of brackets for chains, and lateral hooks can be used for wire attachment and tensioning.
- The end post is available in four thicknesses, suitable for different row lengths: up to 80 m with 1.65 mm thickness, over 80 m with 2.15 mm thickness in HDG, over 150 m with 2.65 mm thickness, and 2 mm thick for strip galvanised Z275.
- The open side of the profile should face the anchor point.
- The P5E configuration table provides details on the number of S-hooks based on post length, ranging from 140 cm to 300 cm, with the number of pairs of hooks varying accordingly.
- Installation depth recommendations are provided for each post length, ensuring the end post is installed 10-20 cm deeper than the first or last intermediate post.
- Posts are available in three types: Hot Dipped Galvanised, Strip Galvanised (Z275), and Weathering steel.
- Profil Alsace S.A.S., Zone Industrielle Kiesweg, F-67630 Niederlauterbach.
- Tel.: +33 (0) 3 88 94 68 88, Fax: +33 (0) 3 88 94 68 85, E-Mail: [email protected], Website: www.profilalsace.com
Catalog excerpts
Profit Alsace P5E Profile The P5E end post provides the best solution for all systems: - Large pull out hole - Attachment holes in the back wall for a centre tensioning of fixed wires - Holes at ground level for the base plate - Attach end posts to the base plate using a simple plug system - Options for attaching any type of brackets for chains - Lateral hooks can be used to attach and tension wires - Available in four thicknesses: • up to 80 m row length with 1.65 mm thickness • over 80 m row length with 2.15 mm thickness in HDG • over 150 m row length with 2.65 mm thickness. • 2 mm thick for strip galvanised Z275 The open side of the profile must face the anchor point. Our posts are available in 3 different types: - Hot Dipped Galvanised - Strip Galvanised (Z275) - Weathering steel P5E Configuration table P5E installation depth table
Open the catalog to page 1
F-67630 Niederlauterbach E-Mail: [email protected] Website Youtube
Open the catalog to page 2All Profil Alsace catalogs and technical brochures
P5L Profile2 Pages
P5M Profile2 Pages
P5 Profile2 Pages
P4 Profile2 Pages
P3 Profile2 Pages
SUPRA 502 Pages
P5X profile2 Pages
P6 Profile2 Pages
P7E Profile2 Pages
