Hydraulic Diaphragm Metering Pump ORLITA Evolution mikro For the smallest quantities at high pressures The ORLITA Evolution mikro is an innovative micro-metering pump for high pressures. The hydraulic diaphragm metering pump is the first of its kind with an electronically regulated linear direct power end. The power end has few mechanical functional elements and thus operates with virtually minimal maintenance. Precise metering of 0.01 l/h up to a max. of 18 l/h at up to 260 bar (400 bar design) Stroke length: 0 - 60 mm Stroke rate: 0 - 200 strokes/min. Stroke length adjustment range of 0 - 100 %, stroke rate range of 0 – 100 % The metering reproducibility is better than ±1 % under defined conditions and with correct installation PTFE multi-layer safety diaphragm with integrated diaphragm rupture signalling system or metal diaphragm Large real volumetric flow control range: 1:200 Materials in contact with fluids: Stainless steel 1.4404, special materials such as Hastelloy C, PVDF etc. available on request Universal control options - with 0-10 V / 4-20 mA analogue signal as standard - other variants, such as fieldbus or contact control, are possible Individual process-dependent metering profiles are possible Space-saving, easy-to-install solution Degree of protection IP 55 Designs compliant with API 675 and ATEX Technical changes reserved. Printed in Ger

Hydraulic Diaphragm Metering Pump ORLITA Evolution mikro For the smallest quantities at high pressuresTechnical data for ORLITA Evolution mikro EMFa Plunger Max. Max. pump capacity in l/h at strokes/min Theor. Suction Connection on Shipping 0 pressure stroke lift suction/discharge weight volume side Performance data applies at ambient temperature of 40 °C, 50 °C and 55 °C and at 24 and 72 V DC. Performance data for ambient temperature of 60 °C is available on request. Performance data for 320, 400 bar (piston diameter 3 mm) and for 64 bar (piston diameter 6 mm) is available on request. Performance...