MUNICIPAL MACHINES CATALOGUE MACHINES FOR SUMMER ROAD AND GREEN AREAS MAINTENANCE WINTER ROAD MAINTENANCE MACHINERY

MACHINES FOR SUMMER ROAD AND GREEN AREAS MAINTENANCE AGATA ZM-1250 / 1400 / 1600 / 2000 SWEEPERS PRONAR ZMC 2.0 TRAILED SWEEPER PRONAR ZMC 3.0 TRAILED SWEEPER PRONAR BBK160 / BBK180 / BBK 200 REAR-SIDE FLAIL MOWERS CONNECTORS DIAGRAM PRONAR R1000 WATER TANK PRONAR WWP500 / WWP600 FRONT MULTIFUNCTION ARMS PRONAR WWT420 / WWT480 REAR MULTIFUNCTION ARMS WWT600 / WWT700T / WWT600P REAR MULTIFUNCTION ARMS PRONAR RD-Z24 ROAD GRADER PRONAR ZHZ100 HYDRAULIC POWER UNITS PRONAR ZHD170 HYDRAULIC POWER FEEDER PRONAR KP-7 / KP-10 WASTE CONTAINERS

AGATA sweepers are designed for cleaning hard-paved surfaces. They enable removal and collection of dirt or (without waste collection tank and with angled brush) only sweeping to the right or left side. The sweepers can be optionally equipped with sprinkler system (reduced emission of powder and dust) and with a side disk brush (for sweeping along kerbs) They are used by road maintenance services for cleaning of the roadbed prior to application of asphalt layer on renovated road sections. They can be also used by municipal services, as well as in agriculture, forestry and water management establishments...

TRAILED SWEEPER Pronar ZMC 2.0 trailed vacuum sweeper is adapted for work with tractors with at least 60 HP. It has been designed to perfectly clean roads, large warehouse surfaces, and areas paved with asphalt, concrete or cobblestones. The sweeping unit consists of 2 hydraulic rotary disc brushes that sweep the debris into special brush for removing plants at edge of carriageway edges. the machine’s interior, where a vacuum suction system moves it to a 2.1 m³ container Sweeper controller. Hydraulically articulated drawbar. at the rear of the sweeper. The sprinkler system, consisting of a pump,...

TRAILED SWEEPER Pronar ZMC 3.0 sweeper features mechanical debris transport system. Two rotary disc brushes clean the surface, a roller brush sweeps the debris onto a scraper conveyor belt, which conveys it to the waste container. The Scraper conveyor transporting waste to the Control panel in the operator’s cabin. hopper. sweeper helps to maintain roads, city streets, large squares, warehouse Hydraulic adjustment of rotary disc brush position. Hydraulic hopper dump system. facilities, as well as car parkings and pedestrian areas. It performs ideally in road cleaning after the winter. The operator...

TRUCK SWEEPER ZM-P sweeper represents an innovative solution developed by Pronar. The standard sweeper may be fitted with one of available drives - PTO or hydraulic ZM-P sweeper is destined for hitching to tractor’s rear three-point linkage, and optionally, the hydraulic version can be mounted on the front of a tractor. The ZM-P16 model may be equipped with a sand spreader and a special „comb” brush. This combination is perfectly suited for minimising the effects of winter in cities — snow is removed from the pavement, and the sand spreader minimises the risk of pedestrians slipping on the cleaned...

REAR-FRONT FLAIL MOWERS BK110M / 140M / 160M / 180M / 200M / 250M Pronar BK-series mulchers (rear-front flail mowers) fit perfectly with green areas, orchards and agriculture.area maintenance tasks High quality and great durability of these machines are ensured by use of wearresistant materials in the production process. Hydraulic traverse enables mowing outside of the tractor’s outline. Intersecting axis gear and belt transmission — overload protection for BK series mowers. The features of modernised flail mowers BK M - series: • Possibility of aggregation on both rear and front for tractor...

REAR-SIDE FLAIL MOWERS BBK160M / 180M / 200M Similarly to rear-front flail-mowers (BK series), the BBK series rear-side flail-mowers, are designed for maintaining urban greenery infrastructure, in orchards as well as on forested grounds. They are suspended on a pantograph, which enables effective mowing of roadside ditches and use on uneven terrain. A large horizontal hydraulic traverse enables mowing with the entire working width of the mower beyond the tractor’s outline. A replaceable jacket inside the mower, made of abrasion-resistant steel, protects the machine’s housing against damage. Length...

FLAIL MOWERS Connectors diagram Pronar offers a vide variety of flail knives and hammer for all models of mulchers and mowing heads. This allows to choose a knife type adapted to the needs and may increase work effectiveness Type Approx. weight Flail hammer (light) grass, stalks, stems, thin bushes, thin branches, stubble, crop residues Pronar offers hydraulic multifunctional arms mounted on front or rear of carrying vehicle. These machines increase the functionality of the tractor through the use of different types of operating heads. Model Connector size Flail hammer grass, stalks, stems, thin...

MOWING HEADS SPECIALIZED HEADS GK80L / GK100L / GK110 / GK140 Cutting heads for WWP600 / WWP500 / WWP500U / WWP500UH multifunction arms are used for mowing grass, cutting bushes and shredding of cut tree branches. Design enables operation in hard to reach areas such as roadside ditches behind protective barriers, slopes, drainage ditches, roadsides. The PRONAR GM 500 washer for cleaning road signs, boards, posts and protective barriers cutting head leaves the cutting area with evenly ground material, PRONAR GP 200 branch cutting saw which also forms a fertilising PRONAR GO 800 ditch digger HEDGE...

MULTIFUNCTION FRONT ARMS WWP500 / WWP600 PRONAR WWP500 / WWP600 universal multifunction arms are designed for operation with tractors equipped with a front PTO and front 3pt linkage. Thanks to the possibility of installing several types of working heads, they are universal tool carriers at municipal companies,enterprises providing public services and maintaining roads and roadside areas. The arm design and its outreach range of 6 m or 7 m allow cutting in hard to reach areas such as roadside ditches behind protective barriers, slopes, drainage ditches, etc. Mutifunction arm is controlled from...