- Catalogs
- Pulmic & Kamikaze
- KVS 2000
KVS 2000
1 / 164 PagesView full catalog
KVS 2000
Product catalog summary
Battery Charger Safety Instructions:
- Ensure voltage compatibility between charger and battery to prevent injury.
- Keep charger clean and dry to avoid damage.
- Use only with original batteries to prevent fire or explosion.
- Avoid using damaged chargers.
- Do not use on flammable surfaces.
- Initial charge: 3-4 hours; normal charge: 4-6 hours for three batteries.
- LED indicators: red for charging, green for complete.
- Handle tool carefully to avoid cuts and injuries.
- Prolonged use or incorrect positions can cause harm.
- Ensure chain is undamaged, lubricated, and sharpened.
- Check chain tension and bar condition.
- Use only compatible accessories.
- Designed for pruning branches; not for use in rain or on wet plants.
- Suitable for pruning branches and cutting small trees.
- Stop chain if danger or malfunction is detected.
- Includes components like oil cap, handles, trigger, safety switch, protective cover, screen, battery, and triple charger.
- Cutting diameter: 160 mm, Chain speed: 11.2 m/s, Bar length: 20 cm, Brushless motor, Nominal voltage: DC 21.6V, Power: 600W.
- Lithium-ion battery: 4 Ah capacity, 21.6V voltage, 86.4 Wh power.
- Triple charger: Input voltage 100-240 V AC, Output voltage DC 25.2 V, Charging current 1.4A.
- Charge in a closed environment between +10°C and 22°C.
- Ensure charger and battery specifications align before charging.
- LED indicators show charging status.
- Disconnect batteries after charging and recharge every 3 months during storage.
- Maintain ambient temperature between 10°C and 22°C during charging and 0°C to 45°C during use.
- Avoid explosive atmospheres and proximity to flammable materials.
- Ensure chainsaw and batteries are clean and dry before use.
- Check chain tension and fill the oil tank as specified.
- Insert the battery securely.
- Wear appropriate gloves and clothing.
- Check tool functionality before use.
- Securely grip the chainsaw with both hands and ensure the chain and bar are clear of objects.
- Wear protective clothing, gloves, and goggles.
- Maintain maximum speed and avoid cutting with the bar's tip.
- Ensure proper lubrication and keep a safe distance from the chain.
- Disconnect the battery before maintenance or cleaning.
- Use only original parts for repairs.
- Clean the tool with a damp cloth and avoid aggressive cleaning products.
- Disconnect the battery before disassembly.
- Use the supplied wrench to remove nuts and adjust the chain tension.
- Ensure proper installation as specified in the manual.
Specifications and Technical Details
The document outlines the specifications for an electronic chainsaw, model KVS 2000, with a cutting diameter of 160 mm and a chain speed of 11.2 m/s.
General Safety Instructions
1. Ensure the tool's switch is functioning properly; repair if necessary.
2. Disconnect the battery before adjustments, repairs, or storage to prevent accidents.
3. Keep the tool away from children and untrained individuals.
4. Regular maintenance is crucial to prevent accidents and ensure tool longevity.
5. Keep the chain clean and lubricated for better control and reduced risk of damage.
6. Do not use the chainsaw above shoulder height.
7. Read the manual thoroughly before use.
Battery-Powered Tool Warnings
1. Use only the manufacturer's specified charger to avoid battery damage and fire risk.
2. Store the battery away from metal objects to prevent short circuits.
3. Avoid contact with battery liquid; rinse and seek medical advice if contact occurs.
Personal Safety
1. Stay focused and avoid distractions while using the tool.
2. Use personal protective equipment (gloves, goggles, helmet, etc.).
3. Maintain proper body balance and wear appropriate clothing.
Special Safety Instructions for Chainsaw Use
1. Maintain a safe distance from others and ensure the chain is stopped before moving the tool.
2. Use the chainsaw only for its intended purpose (pruning branches).
3. Avoid using the chainsaw in wet conditions or near flammable substances.
Battery and Charger Safety
1. Charge batteries in a dry, covered environment.
2. Do not expose the battery to direct sunlight or heat sources.
3. Use only original chargers and batteries to prevent fire or explosion risks.
Tool Usage and Maintenance
1. The tool is designed for pruning branches and should not be used for other materials.
2. Regularly check the chain's tension and sharpness.
3. Do not attempt self-repairs; contact service centers for maintenance.
Component List
The package includes the chainsaw, three batteries, a triple charger, a tool box, a sword cover, and a user manual.
Error Codes
The display shows error codes such as E2 for over/under voltage and E6 for MOSFET overheating, indicating specific issues with the tool.
The document outlines the specifications for an electronic chainsaw, model KVS 2000, with a cutting diameter of 160 mm and a chain speed of 11.2 m/s.
General Safety Instructions
1. Ensure the tool's switch is functioning properly; repair if necessary.
2. Disconnect the battery before adjustments, repairs, or storage to prevent accidents.
3. Keep the tool away from children and untrained individuals.
4. Regular maintenance is crucial to prevent accidents and ensure tool longevity.
5. Keep the chain clean and lubricated for better control and reduced risk of damage.
6. Do not use the chainsaw above shoulder height.
7. Read the manual thoroughly before use.
Battery-Powered Tool Warnings
1. Use only the manufacturer's specified charger to avoid battery damage and fire risk.
2. Store the battery away from metal objects to prevent short circuits.
3. Avoid contact with battery liquid; rinse and seek medical advice if contact occurs.
Personal Safety
1. Stay focused and avoid distractions while using the tool.
2. Use personal protective equipment (gloves, goggles, helmet, etc.).
3. Maintain proper body balance and wear appropriate clothing.
Special Safety Instructions for Chainsaw Use
1. Maintain a safe distance from others and ensure the chain is stopped before moving the tool.
2. Use the chainsaw only for its intended purpose (pruning branches).
3. Avoid using the chainsaw in wet conditions or near flammable substances.
Battery and Charger Safety
1. Charge batteries in a dry, covered environment.
2. Do not expose the battery to direct sunlight or heat sources.
3. Use only original chargers and batteries to prevent fire or explosion risks.
Tool Usage and Maintenance
1. The tool is designed for pruning branches and should not be used for other materials.
2. Regularly check the chain's tension and sharpness.
3. Do not attempt self-repairs; contact service centers for maintenance.
Component List
The package includes the chainsaw, three batteries, a triple charger, a tool box, a sword cover, and a user manual.
Error Codes
The display shows error codes such as E2 for over/under voltage and E6 for MOSFET overheating, indicating specific issues with the tool.
Technical Specifications
The document provides detailed specifications for an electronic chainsaw. Key features include a 20 cm (8") blade, a 1/4 x 1.1 chain with 47 mesh, manual chain tension regulation, automatic lubrication, and a brushless motor with a nominal voltage of DC 21.6V and power of 600W. The chainsaw dimensions are 48 x 12 x 12 cm, weighing 1.4 kg without the battery and 1.9 kg with it. The lithium-ion battery has a capacity of 4 Ah, voltage of 21.6V, and power of 86.4 Wh, weighing 0.5 kg. The charger operates on 100-240 V AC, 50-60 Hz, with an output of DC 25.2 V and a charging current of 1.4A, taking approximately 5 hours to charge.
The document provides detailed specifications for an electronic chainsaw. Key features include a 20 cm (8") blade, a 1/4 x 1.1 chain with 47 mesh, manual chain tension regulation, automatic lubrication, and a brushless motor with a nominal voltage of DC 21.6V and power of 600W. The chainsaw dimensions are 48 x 12 x 12 cm, weighing 1.4 kg without the battery and 1.9 kg with it. The lithium-ion battery has a capacity of 4 Ah, voltage of 21.6V, and power of 86.4 Wh, weighing 0.5 kg. The charger operates on 100-240 V AC, 50-60 Hz, with an output of DC 25.2 V and a charging current of 1.4A, taking approximately 5 hours to charge.
Battery Charging
Instructions emphasize not exposing the battery to extreme conditions and ensuring it is dry and clean before charging. The battery should be fully charged before first use, and the charging process should be monitored via the LED indicator. The document advises charging the battery every 3 months during storage.
Instructions emphasize not exposing the battery to extreme conditions and ensuring it is dry and clean before charging. The battery should be fully charged before first use, and the charging process should be monitored via the LED indicator. The document advises charging the battery every 3 months during storage.
Work Environment
The chainsaw should be used in temperatures between 0°C and 45°C and not in explosive atmospheres or wet conditions. The tool should be stored in a dry environment with temperatures between 10°C and 22°C during charging.
The chainsaw should be used in temperatures between 0°C and 45°C and not in explosive atmospheres or wet conditions. The tool should be stored in a dry environment with temperatures between 10°C and 22°C during charging.
Initial Assembly
Before use, ensure the chainsaw and batteries are clean and dry, assemble the left handle, check chain tension, fill the oil reservoir, and secure the battery.
Before use, ensure the chainsaw and batteries are clean and dry, assemble the left handle, check chain tension, fill the oil reservoir, and secure the battery.
Usage Procedures
Users should wear appropriate protective gear and ensure the tool is functioning correctly before use. The document provides detailed instructions on operating the chainsaw safely, including maintaining a firm grip, avoiding cutting oversized branches, and ensuring the chain stops when the trigger is released.
Users should wear appropriate protective gear and ensure the tool is functioning correctly before use. The document provides detailed instructions on operating the chainsaw safely, including maintaining a firm grip, avoiding cutting oversized branches, and ensuring the chain stops when the trigger is released.
Cutting Instructions
Safety precautions include wearing protective clothing and maintaining a safe distance from the chain. The document advises on proper cutting techniques to avoid overheating and loss of control.
Safety precautions include wearing protective clothing and maintaining a safe distance from the chain. The document advises on proper cutting techniques to avoid overheating and loss of control.
Maintenance and Cleaning
Regular maintenance is crucial for safe operation. The document outlines steps for cleaning and inspecting the chainsaw, including checking the chain tension and lubrication system.
Regular maintenance is crucial for safe operation. The document outlines steps for cleaning and inspecting the chainsaw, including checking the chain tension and lubrication system.
Storage
Recommendations include ensuring the battery is fully charged before storage, avoiding extreme temperatures, and storing the battery separately from the tool.
Recommendations include ensuring the battery is fully charged before storage, avoiding extreme temperatures, and storing the battery separately from the tool.
Disposal
The document advises on proper disposal of the battery and tool components, emphasizing recycling and avoiding household waste.
The document advises on proper disposal of the battery and tool components, emphasizing recycling and avoiding household waste.
Battery Handling and Disposal: Batteries should be fully discharged before disposal. Cover terminals with tape to prevent short circuits. Do not disassemble batteries. Dispose of batteries according to local regulations at designated waste collection centers. For detailed information, contact local waste disposal offices or customer service.
Storage Conditions: Batteries should be stored at specific temperatures depending on the duration: less than 1 month (-20°C to +60°C), less than 6 months (-10°C to +35°C), more than 6 months (0°C to +30°C).
Spare Parts: Original spare parts such as batteries, battery chargers, and chains are available from the manufacturer. Contact technical service or distributors if needed.
Warranty: A 12-month warranty is provided for professional users covering manufacturing defects in mechanical parts, battery, charger, motor, and transmission mechanism. Wear and tear are not covered. The warranty is void in cases of abnormal use, improper maintenance, tool modifications, damage from unqualified repairs, natural events, or insufficient battery charging. Registration on the website within 30 days of purchase is required for warranty validity.
Troubleshooting: Common issues include non-functioning chainsaw due to low battery, improper battery connection, or switch malfunction. Solutions involve recharging the battery, ensuring proper connections, and consulting service centers for repairs. Other issues like overheating chains or poor cutting performance require checking lubrication systems, replacing damaged parts, and ensuring proper battery charging.
Safety Information: Users must read the manual thoroughly before using the machine. Safety symbols indicate necessary precautions such as wearing protective gear and avoiding use in wet conditions. Batteries and chargers have specific disposal and usage warnings to prevent fire and explosion risks.
General Safety Instructions: Maintain a clean and well-lit work area. Avoid using power tools in explosive environments. Ensure proper electrical safety by using matching plugs and avoiding exposure to wet conditions. Follow tool-specific warnings to prevent accidents and injuries.
Special Safety Instructions for Chainsaws: Maintain a safe distance from bystanders, handle the tool properly, and wear appropriate protective equipment. Avoid using the chainsaw for unintended purposes and ensure proper maintenance to prevent accidents.
Special Safety Instructions for Battery-Powered Tools
- The charger is for indoor use only. Ensure charging is done indoors.
- Remove the battery before cleaning the charger to prevent damage and electric shock.
- Avoid exposing the battery to sunlight or hot surfaces to prevent explosion.
- Allow the battery to cool before charging.
- Do not disassemble the battery to avoid injury.
- The charger is for indoor use only. Ensure charging is done indoors.
- Remove the battery before cleaning the charger to prevent damage and electric shock.
- Avoid exposing the battery to sunlight or hot surfaces to prevent explosion.
- Allow the battery to cool before charging.
- Do not disassemble the battery to avoid injury.
Correct Use of the Battery Charger
- Use only with rechargeable batteries to prevent fire and explosions.
- Inspect the charger, cable, and plug before use. Do not use if damaged.
- Ensure charger voltage matches battery voltage to avoid injury.
- Keep the charger clean and dry; do not use outdoors.
- Charge the battery for 3-4 hours before first use; normal charging time is 4-6 hours.
- The charger can charge up to 3 batteries simultaneously, with charging time proportional to the number of batteries.
- Use only with rechargeable batteries to prevent fire and explosions.
- Inspect the charger, cable, and plug before use. Do not use if damaged.
- Ensure charger voltage matches battery voltage to avoid injury.
- Keep the charger clean and dry; do not use outdoors.
- Charge the battery for 3-4 hours before first use; normal charging time is 4-6 hours.
- The charger can charge up to 3 batteries simultaneously, with charging time proportional to the number of batteries.
Tool Safety Requirements
- Ensure the chain is undamaged and tensioned correctly.
- The bar should not be deformed, and the slot should be intact.
- The chainsaw should be clean, dry, and all components intact.
- Lubrication must work properly, and accessories should be original.
- Ensure the chain is undamaged and tensioned correctly.
- The bar should not be deformed, and the slot should be intact.
- The chainsaw should be clean, dry, and all components intact.
- Lubrication must work properly, and accessories should be original.
Intended Use
- Designed for pruning branches only; misuse can cause damage and danger.
- Not for use in rainy weather or on wet plants.
- Check chain tension and sharpening before use.
- Designed for pruning branches only; misuse can cause damage and danger.
- Not for use in rainy weather or on wet plants.
- Check chain tension and sharpening before use.
Description of Features
- Suitable for pruning branches and cutting small trees.
- Allows two-handed use for safety.
- Release the trigger in case of danger or malfunction to stop the chain.
- Suitable for pruning branches and cutting small trees.
- Allows two-handed use for safety.
- Release the trigger in case of danger or malfunction to stop the chain.
Overview of the Tool
- Components include oil cap, handles, trigger, safety switch, display, battery, and charger.
- Display shows usage time, error codes, and battery charge percentage.
- Components include oil cap, handles, trigger, safety switch, display, battery, and charger.
- Display shows usage time, error codes, and battery charge percentage.
Technical Specifications
- Maximum cutting dimensions: 160 mm
- Chain speed: 11.2 m/s
- Bar length: 20 cm
- Rated voltage: DC 21.6V
- Weight with battery: 1.9 Kg
- Maximum cutting dimensions: 160 mm
- Chain speed: 11.2 m/s
- Bar length: 20 cm
- Rated voltage: DC 21.6V
- Weight with battery: 1.9 Kg
Battery Charging
- Charge indoors at temperatures between 10°C and 22°C.
- Ensure battery is dry and clean before charging.
- Use only original batteries and chargers.
- Monitor charging with LED indicators.
- Charge indoors at temperatures between 10°C and 22°C.
- Ensure battery is dry and clean before charging.
- Use only original batteries and chargers.
- Monitor charging with LED indicators.
Working Environment
- Use within specified temperature ranges.
- Avoid explosive environments and flammable materials.
- Do not use in rain or on wet branches.
- Use within specified temperature ranges.
- Avoid explosive environments and flammable materials.
- Do not use in rain or on wet branches.
Initial Assembly
- Ensure chainsaw and batteries are clean and dry.
- Assemble handles and check chain tension.
- Fill the oil tank and ensure all components are secure.
- Ensure chainsaw and batteries are clean and dry.
- Assemble handles and check chain tension.
- Fill the oil tank and ensure all components are secure.
Early Working Procedures
- Wear protective gear and check tool operation before use.
- Hold the saw with both hands and ensure no contact with objects before starting.
- Do not exceed cutting dimensions.
- Wear protective gear and check tool operation before use.
- Hold the saw with both hands and ensure no contact with objects before starting.
- Do not exceed cutting dimensions.
Instructions for Cutting
- Wear protective clothing and gloves.
- Keep chainsaw at full speed and avoid cutting with the bar's end.
- Maintain a safe distance from the chain and keep others away.
- Wear protective clothing and gloves.
- Keep chainsaw at full speed and avoid cutting with the bar's end.
- Maintain a safe distance from the chain and keep others away.
Cleaning and Maintenance
- Disconnect the battery before maintenance.
- Clean the tool with a damp cloth and avoid detergents.
- Regularly check and clean the chain and bar.
- Disconnect the battery before maintenance.
- Clean the tool with a damp cloth and avoid detergents.
- Regularly check and clean the chain and bar.
Chain and Bar Disassembly and Assembly
- Use the supplied Allen wrench to disassemble and assemble the chain and bar.
- Adjust chain tension as needed.
- Use the supplied Allen wrench to disassemble and assemble the chain and bar.
- Adjust chain tension as needed.
Chain Tension and Adjustment: Ensure the guide links of the chain are visible for half the height in the lower part of the bar. If not, adjust the tension. The chain pinion should only be serviced by a specialized center.
Lubrication: The chainsaw has an automatic oil pump. To fill the oil tank, disconnect the battery, clean the area, fill the tank without overflowing, and secure the cap. Check for oil traces to ensure proper pump operation.
Pinion and Bar Inspection: Disconnect the battery, remove the chain and bar, and measure the groove depth. If the groove exceeds 0.5 mm or the pinion depth is less than 1.1 mm, contact a service center.
Storage: Fully charge the battery before storage. Avoid extreme temperatures and remove the battery if not in use for long periods. Store in a dry environment and charge every four months.
Disposal: Dispose of the battery and tool according to local regulations. Do not dispose of with household waste. Ensure batteries are fully discharged and poles covered before disposal.
Spare Parts: Original spare parts such as batteries, chargers, and chains are available from the manufacturer.
Warranty: Covers 12 months for professional users against manufacturing defects. Excludes wear and tear and misuse. Registration within 30 days of purchase is required.
Troubleshooting: Includes solutions for common issues like non-working chainsaw, intermittent operation, and charging problems. Ensure repairs are done by qualified personnel using original parts.
Special Safety Instructions for Chainsaw
- Maintain a safe distance of 1.5 meters from bystanders and ensure the chain is not moving when transporting the tool.
- Hold the rear handle with the right hand and the front handle with the left hand to minimize injury risk.
- Wear protective gear including goggles, hearing protection, and protective clothing to reduce injury risk from debris or accidental contact with the chain.
- Ensure stable footing on a firm, level surface before operating the chainsaw.
- Avoid using the chainsaw for unintended purposes like cutting plastic or stone.
Battery-Powered Tool Safety Instructions
- Charge the battery in a dry, covered area and avoid exposure to direct sunlight or heat sources.
- Use only the original charger and ensure voltage compatibility between the charger and battery.
- Do not attempt to repair the battery or charger yourself; seek professional service.
Correct Use of the Charger
- Use the charger only with compatible lithium rechargeable batteries.
- Inspect the charger and cables before use and avoid using damaged equipment.
- Charge in a dry environment and avoid flammable surfaces.
Machine Safety Requirements
- Ensure the chain is well-lubricated and tensioned correctly.
- Check that the guide bar is not deformed and the sprocket groove depth does not exceed 0.5 mm.
- Use only compatible and original accessories.
Intended Use
- The tool is designed exclusively for pruning branches and should not be used in wet conditions or for other materials.
Technical Specifications
- Maximum cutting diameter: 160 mm
- Chain speed: 11.2 m/s
- Guide bar length: 20 cm
- Motor: Brushless, 600W
- Battery: 21.6V, 4 Ah
Battery Charging Procedure
- Charge in a closed environment between 10°C and 22°C.
- Use the three-way charger to charge up to three batteries simultaneously.
- Disconnect batteries after charging to prevent damage.
Working Environment
- Maintain ambient temperature between 10°C and 22°C during charging and 0°C to 45°C during use.
- Avoid explosive atmospheres and flammable materials.
Safety Symbols
This section outlines the safety symbols used in the manual and on the equipment. Key symbols include warnings for potential injury, instructions to read the user manual carefully, and recommendations to use protective gloves, glasses, and footwear. It also advises against using the tool in wet conditions and disposing of it with household waste.
Battery and Charger Symbols
The battery is a lithium-ion type and should not be disposed of with household waste or exposed to fire. It is rechargeable and recyclable. The charger should only be used indoors and is marked with a Class II protection symbol.
General Safety Information for Power Tools
Users are advised to read all safety instructions to prevent electric shock and injury. The term "power tool" refers to both corded and battery-operated tools. Work areas should be clean and well-lit, and tools should not be used in flammable or explosive environments. Children and bystanders should be kept at a safe distance.
Electrical Safety for Chargers
Charger plugs must match the outlet, and adapters should not be used. Avoid body contact with grounded surfaces to reduce shock risk. Chargers should not be exposed to rain or moisture, and cables should be kept away from heat and sharp edges.
Tool Usage Warnings
First-time users should practice on a stand to learn tool handling. Chainsaws can kick back if they hit a hard object. Tools should not be overloaded, and faulty switches should be repaired. Batteries should be removed before adjustments or storage.
Battery-Powered Tool Warnings
Only use chargers specified by the manufacturer. Batteries should be kept away from metal objects to prevent short circuits. Leaking battery fluid can cause injury.
User Safety
Users should remain attentive and avoid distractions. Protective clothing and equipment are recommended. Tools should not be carried with fingers near the trigger, and balance should be maintained at all times.
Special Safety Instructions for Chainsaws
Bystanders should be at least 1.5 meters away. Chainsaws should be held with both hands, and protective gear should be worn. The ground should be stable and secure during use.
Battery and Charger Usage
Chargers should be used indoors, and batteries should not be exposed to sunlight or heat. Damaged chargers should not be used, and the correct voltage should be ensured. Chargers can charge up to three batteries simultaneously, with LED indicators showing charging status.
Residual Risk Warning
Users should be cautious of sharp edges and prolonged tool use in incorrect positions.
This section outlines the safety symbols used in the manual and on the equipment. Key symbols include warnings for potential injury, instructions to read the user manual carefully, and recommendations to use protective gloves, glasses, and footwear. It also advises against using the tool in wet conditions and disposing of it with household waste.
Battery and Charger Symbols
The battery is a lithium-ion type and should not be disposed of with household waste or exposed to fire. It is rechargeable and recyclable. The charger should only be used indoors and is marked with a Class II protection symbol.
General Safety Information for Power Tools
Users are advised to read all safety instructions to prevent electric shock and injury. The term "power tool" refers to both corded and battery-operated tools. Work areas should be clean and well-lit, and tools should not be used in flammable or explosive environments. Children and bystanders should be kept at a safe distance.
Electrical Safety for Chargers
Charger plugs must match the outlet, and adapters should not be used. Avoid body contact with grounded surfaces to reduce shock risk. Chargers should not be exposed to rain or moisture, and cables should be kept away from heat and sharp edges.
Tool Usage Warnings
First-time users should practice on a stand to learn tool handling. Chainsaws can kick back if they hit a hard object. Tools should not be overloaded, and faulty switches should be repaired. Batteries should be removed before adjustments or storage.
Battery-Powered Tool Warnings
Only use chargers specified by the manufacturer. Batteries should be kept away from metal objects to prevent short circuits. Leaking battery fluid can cause injury.
User Safety
Users should remain attentive and avoid distractions. Protective clothing and equipment are recommended. Tools should not be carried with fingers near the trigger, and balance should be maintained at all times.
Special Safety Instructions for Chainsaws
Bystanders should be at least 1.5 meters away. Chainsaws should be held with both hands, and protective gear should be worn. The ground should be stable and secure during use.
Battery and Charger Usage
Chargers should be used indoors, and batteries should not be exposed to sunlight or heat. Damaged chargers should not be used, and the correct voltage should be ensured. Chargers can charge up to three batteries simultaneously, with LED indicators showing charging status.
Residual Risk Warning
Users should be cautious of sharp edges and prolonged tool use in incorrect positions.
Specifications:
The electric chainsaw is designed for trimming branches and cutting small diameter trees. It features a brushless motor, a chain speed of 11.2 m/s, and a guide bar length of 20 cm. The tool operates at a nominal voltage of DC 21.6V with a power of 600W. The chainsaw weighs 1.4 kg without the battery and 1.9 kg with it. The lithium-ion battery has a capacity of 4 Ah and a voltage of 21.6V.
The electric chainsaw is designed for trimming branches and cutting small diameter trees. It features a brushless motor, a chain speed of 11.2 m/s, and a guide bar length of 20 cm. The tool operates at a nominal voltage of DC 21.6V with a power of 600W. The chainsaw weighs 1.4 kg without the battery and 1.9 kg with it. The lithium-ion battery has a capacity of 4 Ah and a voltage of 21.6V.
Safety Requirements:
Ensure the chain is undamaged, properly tensioned, and lubricated. The guide bar should not be deformed, and the safety switch must function correctly. Maintain a minimum distance of 15 cm between the chain and any body part, and keep bystanders at least 1.5 m away.
Ensure the chain is undamaged, properly tensioned, and lubricated. The guide bar should not be deformed, and the safety switch must function correctly. Maintain a minimum distance of 15 cm between the chain and any body part, and keep bystanders at least 1.5 m away.
Usage Instructions:
The tool is intended for branch trimming only and should not be used in wet conditions or by unqualified individuals. Before use, check the chain tension and sharpness. The tool should be operated with both hands for safety.
The tool is intended for branch trimming only and should not be used in wet conditions or by unqualified individuals. Before use, check the chain tension and sharpness. The tool should be operated with both hands for safety.
Battery Charging:
Charge the battery in a dry environment between 10°C and 22°C. The charger can handle up to three batteries simultaneously, with a charging time of 4 to 6 hours. Ensure the battery is fully charged before first use.
Charge the battery in a dry environment between 10°C and 22°C. The charger can handle up to three batteries simultaneously, with a charging time of 4 to 6 hours. Ensure the battery is fully charged before first use.
Operating Conditions:
Maintain ambient temperatures between 10°C and 22°C during charging and 0°C to 45°C during use. Avoid explosive atmospheres and flammable materials.
Maintain ambient temperatures between 10°C and 22°C during charging and 0°C to 45°C during use. Avoid explosive atmospheres and flammable materials.
Maintenance:
Regularly check and clean the tool, ensuring it is dry and free from debris. Use only original parts for repairs and maintenance. The chain and guide bar require periodic tension adjustments and lubrication.
Regularly check and clean the tool, ensuring it is dry and free from debris. Use only original parts for repairs and maintenance. The chain and guide bar require periodic tension adjustments and lubrication.
Warnings:
Do not touch the chain while the battery is installed. Use protective gloves and eyewear during operation. Avoid using the tool in rainy or humid conditions.
Do not touch the chain while the battery is installed. Use protective gloves and eyewear during operation. Avoid using the tool in rainy or humid conditions.
Oil Pump Operation and Maintenance
The document outlines the procedure for filling the oil tank of an electric chainsaw, emphasizing the importance of disconnecting the battery, cleaning the oil cap and surrounding areas, and ensuring the oil tank is filled to the correct level without spillage. It also advises checking the oil pump's functionality by observing oil traces when the chainsaw is running. If no oil traces are visible, the tank should be checked, and if the issue persists, service assistance is recommended.
Gear and Guide Bar Inspection
Instructions are provided for inspecting the sprocket and guide bar, including measuring the groove depth. If the groove depth exceeds specified limits, the chainsaw should not be used, and service assistance is required for replacement.
Storage Guidelines
The document stresses the importance of storing lithium batteries fully charged and avoiding extreme temperatures. It recommends removing the battery if the device is not used for extended periods and storing batteries and chargers in a safe, dry environment.
Recycling and Disposal
Users are advised to recycle the equipment, battery, accessories, and packaging in an environmentally friendly manner, following local regulations. Batteries should not be disposed of in regular waste or exposed to fire or water.
Spare Parts and Warranty
The manufacturer provides original spare parts such as batteries, chargers, and chains. The warranty period is 12 months for professional users, covering manufacturing defects but excluding wear and tear. The warranty is void in cases of misuse, improper maintenance, unauthorized repairs, or failure to register the product within 30 days of purchase.
Troubleshooting
A troubleshooting section addresses common issues such as the chainsaw not working, intermittent operation, overheating chains, and battery charging problems, providing potential causes and solutions.
Declaration of Conformity
The document includes a declaration of conformity, stating compliance with EU directives on machinery, electromagnetic compatibility, and low voltage.
The document outlines the procedure for filling the oil tank of an electric chainsaw, emphasizing the importance of disconnecting the battery, cleaning the oil cap and surrounding areas, and ensuring the oil tank is filled to the correct level without spillage. It also advises checking the oil pump's functionality by observing oil traces when the chainsaw is running. If no oil traces are visible, the tank should be checked, and if the issue persists, service assistance is recommended.
Gear and Guide Bar Inspection
Instructions are provided for inspecting the sprocket and guide bar, including measuring the groove depth. If the groove depth exceeds specified limits, the chainsaw should not be used, and service assistance is required for replacement.
Storage Guidelines
The document stresses the importance of storing lithium batteries fully charged and avoiding extreme temperatures. It recommends removing the battery if the device is not used for extended periods and storing batteries and chargers in a safe, dry environment.
Recycling and Disposal
Users are advised to recycle the equipment, battery, accessories, and packaging in an environmentally friendly manner, following local regulations. Batteries should not be disposed of in regular waste or exposed to fire or water.
Spare Parts and Warranty
The manufacturer provides original spare parts such as batteries, chargers, and chains. The warranty period is 12 months for professional users, covering manufacturing defects but excluding wear and tear. The warranty is void in cases of misuse, improper maintenance, unauthorized repairs, or failure to register the product within 30 days of purchase.
Troubleshooting
A troubleshooting section addresses common issues such as the chainsaw not working, intermittent operation, overheating chains, and battery charging problems, providing potential causes and solutions.
Declaration of Conformity
The document includes a declaration of conformity, stating compliance with EU directives on machinery, electromagnetic compatibility, and low voltage.
See more
Catalog excerpts
Sierra electrónica con batería de litio Tronçonneuse électronique avec batterie au lithium Electronic saw with lithium battery Podadora eletrônica com bateria de lítio Piła elektryczna z akumulatorem litowym 04 ES Manual de uso 36 FR Manuel d’utilisation 132 PL Instrukcja użytkownika 68 EN User’s manual 100 PT Manu
Open the catalog to page 1
Manual de uso / Manuel d’utilisation User’s manual / Manual de uso / Instrukcja obsługi PRECAUCIÓN / ATTENTION / CAUTION / ATENÇÃO / UWAGA ESPAÑOL Lea todas las páginas e ilustraciones cuidadosamente antes de usar la herramienta por primera vez. FRANÇAIS Lisez attentivement toutes les pages et illustrations avant d’utiliser l’outil pour la première fois. ENGLISH Read carefully all pages and figures before using the tool by the first time. PORTUGUÊS Leia todas as páginas e ilustrações cuidadosamente antes de usar a ferramenta pela primeira vez. POLSKI Przeczytaj uważnie wszystkie strony i rysunki...
Open the catalog to page 3
SIERRA ELÉCTRICA 1. Información de seguridad 2. Símbolos de seguridad 3. Información general de seguridad para herramientas eléctricas 4. Instrucciones especiales de seguridad 5. Uso conforme al previsto 6. Descripción de funcionamiento 7. Partes de la herramienta 8. Lista de componentes 9. Especificaciones técnicas 10. Recarga de la batería 11. Condiciones de uso 12. Montaje y puesta en marcha inicial 13. Procedimiento inicial de trabajo 14. Procedimiento de corte 15. Mantenimiento y limpieza 16. Almacenamiento 17. Eliminación de residuos y protección del medio ambiente 18. Recambios 19. Garantía...
Open the catalog to page 4
Esta sección incluye las instrucciones de seguridad para el uso de esta máquina. SIERRA ELÉCTRICA Símbolo de instrucción. Lea atentamente el manual de instrucciones. Usar guantes protectores. Usar gafas protectoras. Use zapatos protectores con suela antideslizante. No utilice la tijera eléctrica en caso de lluvia o en ramas mojadas. No arroje los desechos a la basura doméstica. Riesgo de corte o lesión.
Open the catalog to page 5
SIERRA ELÉCTRICA 2.2 SÍMBOLOS EN LA BATERÍA No arrojar la batería de Ion-Litio a la basura doméstica. No exponga la batería a las llamas o calor intenso, puede explotar. No desarme la batería. La batería se puede recargar y reciclar. Las baterías deben ser recogidas de acuerdo con el respeto al ambiente. 2.3 SÍMBOLOS EN EL CARGADOR Indicación de peligro. Utilice solamente el cargador en interiores. Clase II de aislamiento. Equipo eléctrico, no tire los desechos a la basura dom
Open the catalog to page 6
3.1 SEGURIDAD DEL ÁREA DE TRABAJO • Mantenga el área de trabajo limpia y bien iluminada. Las áreas de trabajo oscuras y desordenadas pueden causar accidentes. • No utilice la herramienta eléctrica en atmósferas inflamables o explosivas, tampoco en presencia de líquidos, gases o polvos inflamables. La herramienta eléctrica puede generar chispas capaces de activar polvos o vapores inflamables. • Mantenga a los niños y transeúntes a distancia mientras usa la herramienta eléctrica. 3.2 INSTRUCCIONES DE SEGURIDAD DEL CARGADOR DE BATERÍAS • El enchufe del cargador debe corresponder a la toma de corriente....
Open the catalog to page 7
SIERRA ELÉCTRICA • Mantenga el cable alejado de fuentes de calor, aceite, bordes afilados y piezas móviles. Un cable dañado o enredado puede aumentar el riesgo de descarga eléctrica. • Si utiliza el cargador en exterior, utilice un cable de extensión adecuado para uso externo. El uso de un cable adecuado reduce el riesgo de descarga eléctrica. • Si no puede evitar utilizar el cargador en un área húmeda, utilice una fuente de alimentación con interruptor diferencial RCD. El uso de un interruptor diferencial reduce el riesgo de descarga o corto-circuito eléctrico. 3.3 ADVERTENCIAS PARA UTILIZAR...
Open the catalog to page 8
3.4 ADVERTENCIAS PARA EL USO DE HERRAMIENTAS CON BATERÍA • Utilice únicamente el cargador especificado por el fabricante. El uso de diferentes cargadores de baterías puede dañar la batería y causar riesgo de incendio y explosión. • La herramienta está diseñada para su uso con sólo la batería original. El uso de diferentes baterías puede dañar la herramienta y aumentar el riesgo de lesiones. ES Manual de uso FR Manuel d’utilisation • No sobrecargue la herramienta, seleccionar una herramienta adecuada para cada trabajo, hace que este sea más seguro y eficiente. • No utilice la herramienta si el...
Open the catalog to page 9
SIERRA ELÉCTRICA • La batería debe almacenarse lejos de piezas metálicas (como monedas, grapas, clavos, tornillos). Un cortocircuito puede causar un incendio. • El uso incorrecto puede hacer que el líquido fugue del interior de la batería. En caso de contacto con el líquido, enjuague bien con agua y consulte a un médico. Fugas de líquido de la batería pueden causar lesiones y quemaduras. 3.5 SEGURIDAD PERSONAL • Cuando utilice la herramienta mantenerse centrado en el uso de la misma, no se distraiga ni realice actividades paralelas. No utilice la herramienta si está demasiado cansado o bajo la...
Open the catalog to page 10
• Mantenga a los transeúntes y otras personas a una distancia mínima segura de 1,5 m, no mueva la herramienta mientras la cadena esté en movimiento. Mantenga cada parte de su cuerpo a una distancia mínima de 15 cm de la cadena. El uso cuidadoso de la herramienta puede evitar lesiones. • Mueva la herramienta solo con la cadena parada. Proteja la cadena durante el almacenamiento para reducir el riesgo de lesiones. • Sujete el mango trasero de la motosierra con la mano derecha y el mango delantero con la mano izquierda, de lo contrario el riesgo de lesiones personales puede ser mayor. • Sujete la...
Open the catalog to page 11All Pulmic & Kamikaze catalogs and technical brochures
KV 310108 Pages
KVS20003 Pages
KV3622 Pages
KV 360172 Pages
TIJERA KV3802 Pages
KAMIKAZE KM-M FORCE3 Pages
KV42 Pages
Keeper forest 5/736 Pages
Pulmic industrial 353 Pages
Related Searches
- Crop sprayer
- Mounted weed sprayer
- Hydraulic crop sprayer
- Pruning shears
- Viticulture weed sprayer
- Orchard weed sprayer
- Backpack sprayer
- Small farm backpack sprayer
- Manual pruning shears
- Pneumatic sprayer
- Garden agricultural atomizer
- Pesticide backpack sprayer
- Herbicide backpack sprayer
- Hand pump backpack sprayer
- Water backpack sprayer
- Air-assisted sprayer
- Viticulture backpack sprayer
- Arboriculture backpack sprayer
- Biological product backpack sprayer
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.