video corpo

K-30-20-STD1 / K-30-20-O

K-30-20-STD1 / K-30-20-O

Product catalog summary
Stationary Thermal Fogger Overview
The stationary thermal fogger is designed with a small tubular frame and utilizes thermal fogging techniques to generate ultra-fine droplets ranging from 1-50 μm. This is achieved through thermo-pneumatic energy, where liquid substances are vaporized and form aerosols upon contact with cool air. The fogger is ideal for pest control, public health, stock protection, plant protection, disinfection, decontamination, deodorization, and cinema effects, offering uniform distribution of active substances without leaving residues.
Specifications
  • Empty Weight: 22 kg (without solution tank)
  • Dimensions: 151 x 41 x 49 cm
  • Solution Tank Capacity: 55 litres (polyethylene, square version)
  • Fuel Tank Capacity: 20 litres
  • Engine Cubic Capacity: 2000 cm3
  • Max Engine Performance: 75 kW (101.6 hp, 64,400 kcal/h)
  • Max Fuel Consumption: 7.6 l/h
  • Ignition: Electronic ignition coil powered by 4 x dry batteries (6V)
  • Starting Device: Manual start
  • Flow Rate: 30 - 120 l/h (depending on nozzle size)
  • Standard Flow Rate: 60 l/h
  • Droplet Size Spectrum: < 25 μm (oil), < 60 μm (oil/water), < 150 μm (water)
Optional Features
  • Electrical starting device
  • Remote control with automatic cut-off and manual start
  • Turntable
Unit Types
  • Standard Units: Designed for water-based, non-flammable fogging solutions and suspensions.
  • O-Units: Designed for inflammable and non-flammable fogging solutions, excluding suspensions.
Contact Information
pulsFOG Dr. Stahl & Sohn GmbH, Abigstrasse 8, D-88662 Überlingen, Germany
Tel: +49 7551 92610, Fax: +49 7551 926161, E-mail: [email protected], Website: www.pulsfog.com
See more

Catalog excerpts

K-30-20-STD1 / K-30-20-O-1

PRODUCT BULLETIN Subject to technical changes 11/2010 Standard-units are designed to fog water based, non-flammable fogging solutions and suspensions. 2) O -units are designed to fog inflammable and non-flammable fogging solutions but not suspensions. 1) STATIONARY THERMAL FOGGER SMALL TUBULAR FRAME Empty weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 kg (without solution tank) Size (length x breadth x height) . . . . . . . . . . . . . . . . . . . . . . . . Capacity of solution tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 litres (square version) made of polyethylene Capacity of fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cubic capacity of engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Automatic ignition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electronic ignition coil fed by 4 x dry batteries = 6V Starting device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Manual start Flow rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 - 120 l/h (according to nozzle size used) Standard flow rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Droplet size spectrum (depending on oil viscosity and nozzle size used) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Electrical starting device • emote control including automatic cut-off device R and manual start • Turntable FOGGING TECHNIQUE AND APPLICATION Thermal fogging is the generation of ultra-fine droplets in a range of 1-50 μm using thermo-pneumatic energy. Liquid substances are vaporized in the unit and form ultra-fine aerosols by condensing on contact with cool ambient air. Thermal fogging is used for any pest control task where active substances should be uniformly distributed even in inaccessible places, without leaving undesirable residues. The fogging technique is the solution for treating large areas and spaces with a minimum quantity of pesticide solution, less operational work and with little harm to the environment (less residues, no penetration into the ground), e.g. in the field of public health, stock protection, plant protection, disinfection, decontamination, deodorization and cinema effects. pulsFOG Dr. Stahl & Sohn GmbH // Abigstrasse 8 // D-88662 Überlingen // Germany Tel: +49 7551 92610 // Fax: +49 7551 926161 // E-mail: [email protected] // www.pul

 Open the catalog to page 1

All PulsFOG Dr. Stahl & Sohn GmbH catalogs and technical brochures

  1. K-10-STD

    1  Page

  2. K-10-SP-SAN

    1  Page

  3. K-50

    1  Page

  4. pulsFOG K-40

    1  Page

  5. K-10-DESERT

    1  Page

  6. K-30-20-BIO

    1  Page

  7. K-22-20-BIO

    1  Page

  8. K-10-SP

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.