BCM-1650 Vegetable Cutting Machine
13Pages

Prospectus Belt Cutting Machine, Model: BCM-1650 / BCM-2450 Belt Cutting Machine, Model: BCM-1650 / BCM-2450 https://www.jegerings.com/en/

Prospectus Belt Cutting Machine, Model: BCM-1650 / BCM-2450 General The belt cutting machines BCM-1650 and BCM-2450 are designed for small and medium-sized vegetable processing companies. The BCM-1650 is the standard version. The BCM-2450 is technically identical, but with an 800 mm longer belt. This additional belt length creates more workspace at the belt for the operators. The machine is suitable for cutting almost all kinds of vegetables in every cutting size from 1 up to 40 mm. These belt cutting machines are also extremely flexible; switching to another cutting size or cutting form is...

Prospectus Belt Cutting Machine, Model: BCM-1650 / BCM-2450 Flat string beans 12 mm Wing knife with crosscut knifes: With this knife vegetables such as leek (half rings), iceberg lettuce (dice), white cabbage (short threads) and melon (dice for fruit salads) can be cut in length and cross-section at the same time. The length can be adjusted on the touch screen. The width size is available in every multiple size of 5 mm. Adjustable disc: With this disc all kinds of cabbages (trails), beet (slices), onion rings, potatoes and other round products can be cut perfectly. The adjustable disc can...

Prospectus Belt Cutting Machine, Model: BCM-1650 / BCM-2450 Julienne knife disc (strip cut 2, 3, 4 ,5, or 6 mm.): With this knife disc, products such as carrot, cucumber, turnip-rooted celery, beet, and paprika can be cut in julienne strips of 2x2, 3x3, 4x4, 5x5 or 5x6 mm. Also this knife disc is very well suited for cutting white and red cabbage and leek for salads. There is also a possibility to cut onions in small parings.

Prospectus Belt Cutting Machine, Model: BCM-1650 / BCM-2450 Grating disc: With this disc vegetables such as carrots, potatoes, daikon radish and beet can be grated. Slicing disc (10 knives): With this disc large quantities of white and red cabbage can be sliced. Also products such as cucumber, carrots, potatoes and onions can be cut into slices. To your choice a cut size of 1,5 - 2 - 3 or 4 mm.

Prospectus Belt Cutting Machine, Model: BCM-1650 / BCM-2450 Special cutting disc (5 mm): This cutting disc with four knives is especially designed for cutting delicate products such as tomatoes and other soft products. This special cutting disc has a cutting size of 5 mm. Because of the wide belt of 150 mm, almost all kind of vegetables can be cut easily without pre-cutting. Examples are products such as cabbage, leek and endive. Belt width reducer: This belt width reducer is especially designed to guide elongated products such as cucumbers and carrots. This ensures that the product will be...

Prospectus Belt Cutting Machine, Model: BCM-1650 / BCM-2450 Cutting quality The machine distinguishes itself because of an exceptional beautiful and high quality cut. After intensive research and many cutting tests the cutting process has been optimized. This is accomplished using an under- and upper belt with very small rollers, so that the radius on the side of the knife is minimal, and the product is to be held till the knife. Together with very sharp knives, the result is exceptional. User-friendliness The machine is equipped with a full-colour touch screen where all functions of the...

Prospectus Belt Cutting Machine, Model: BCM-1650 / BCM-2450 Changing knife discs can be done in a second, by the easy on- and off slide on the knife shaft. The knives and discs themselves are – because of their handy size and weight – also easy to use by smaller persons and female employees. The machine is completely of sustainable stainless steel. All technical components are only from renowned brands. All technical components like bearings, electrical motors and other electrical components are inside the machine. So they are perfectly protected against water. The touch screen is IP-67...

Prospectus Belt Cutting Machine, Model: BCM-1650 / BCM-2450 opened, the machine stops immediately (brake motor). So it is impossible to reach into a rotating knife disc. • The touch screen graphically displays which door is open. Technical data and dimensional diagram Capacity: 500 – 800 kg’s/hour, depending on cutting size and specific gravity of the vegetable product. Electrical data: 1 Ph. / 230 V / 50 Hz / 8.25 Amp. Power: 1.85 kW BCM-1650 Dimensions (LxWxH): 1685 x 645 x 1440 mm’s. Weight: 306.5 kg without the knives BCM-2450 Dimensions (LxWxH): 2515 x 645 x 1440 mm’s. Weight: 322.5 kg...

Prospectus Belt Cutting Machine, Model: BCM-1650 / BCM-2450 Description BCM-1650 standard execution, including: - Stainless steel brake castors Optional: - Standard wing knife - Wing knife with cross knives, including cross knives at every … mm: 5 10 15 20 25 30 35 40 45 50 - Adjustable disc 1-20 mm - Julienne disc (strip cut) 2 x 2 mm - Julienne disc (strip cut) 3 x 3 mm - Julienne disc (strip cut) 4 x 4 of 5 x 5 or 5 x 6 mm - Grating disc 2, 3 or 4 mm - Special slicing disc 5 mm for tomatoes and delicate products (fruits etc.), a choice in cut size of 2, 3, 4, 5 of 6 mm. - Slicing disc...

Prospectus Belt Cutting Machine, Model: BCM-1650 / BCM-2450 Delivery time: stock – 6 weeks. Delivery: ex. works Deurne/ the Netherlands. Packaging and transportation excluded. Warranty: 1 year, outside the Netherlands only on spare parts.

Prospectus Belt Cutting Machine, Model: BCM-1650 / BCM-2450

Prospectus Belt Cutting Machine, Model: BCM-1650 / BCM-2450