Technical Specifications:
The document describes the specifications of simple mounted disc ploughs, specifically types CDP and CDPM. These ploughs are available in 12 and 14-inch sizes and feature a highly resistant tubular frame (100x100). The discs are made of mangano siliceous steel, with dimensions of Ø710x8, and are mounted on waterproof hubs with double conic roll bearings. The ploughs offer multiple adjustment options, including disc angle and drawbar regulation. The underbeam clearance is 82 cm, and they include a rear stabilizing wheel made of the same steel, with a resistance of 140/150 kg/mm². Safety is ensured by a shear bolt.

Options:
Optional features include discs of size 660x8 and Ø710x7, and frames for 10 and 12 inches.

CDP Type Specifications:
- CDP 2: 2 discs, 400-600 mm working width, 35-45 hp, 500 kg.
- CDP 3: 3 discs, 600-1000 mm working width, 60-70 hp, 630 kg.
- CDP 4: 4 discs, 800-1200 mm working width, 70-80 hp, 780 kg.
- CDP 5: 5 discs, 1000-1500 mm working width, 80-100 hp, 870 kg.

CDPM Type Specifications:
- CDPM 2: 2 discs, 660 mm working width, 35-45 hp, 398 kg.
- CDPM 3: 2+1 discs, 1000 mm working width, 45-60 hp, 518 kg.
- CDPM 4: 2+1+1 discs, 1200 mm working width, 60-80 hp, 638 kg.

Manufacturer's Note:
The manufacturer reserves the right to make modifications to the products without applying these changes to previously supplied or ordered equipment.