AERO GT 60.1

AERO GT 60.1
1 / 148 PagesView full catalog

AERO GT 60.1

Product catalog summary
Manual Adjustment of Boom Height
To adjust the boom height, switch to the main menu and use function keys [1]. Manual adjustments can be made via the control unit or joystick, while automatic adjustments require special equipment. Ensure the boom height is not too low to avoid damage, maintaining a minimum height of 0.7m above plants.
Adjusting Boom Inclination
Switch to the main menu and adjust the boom inclination using function keys [2] on either side.
Fertilizer Spreading
Prerequisites: Ensure all safety and operational conditions are met, including equipment checks and verifying environmental conditions.
Spreading Operation: Engage the PTO shaft, activate section control, verify boom height and inclination, switch to the operation screen, and press the Spread On/Off button to start or stop spreading. Disengage the PTO shaft to stop the blower and park the machine on a level surface.
Folding the Boom
Press the lock button for 3 seconds to fold main parts, then fold end parts and main parts until fully retracted. Lower the boom onto the supports, ensuring sufficient space around the machine.
Emptying Residual Quantities
To prevent corrosion and blockages, empty residual quantities daily. Ensure the machine is stable and no persons are in danger zones. Follow the emptying procedure to release fertilizer into a collection tray and return it to storage.
Parking and Uncoupling the Spreader
Park on a level, firm surface, retract suspension cylinders, turn off the tractor engine, engage the parking brake, place chocks under wheels, deploy the support foot, and disconnect all connections before uncoupling the PTO shaft and the machine.
Troubleshooting and Possible Causes
Only qualified personnel should perform certain repairs. Common issues include zero RPM on dosing shaft, reduced working speed, uneven boom folding, boom segments not staying in position, and dosing issues. Consult a professional if necessary.
Overview: The document provides detailed technical instructions for the maintenance and operation of the AERO GT 60.1 mineral fertilizer spreader, focusing on its hydraulic systems, maintenance procedures, and safety precautions.
Hydraulic System Specifications:
  • The AERO GT 60.1 features two independent hydraulic circuits with high operating pressure and oil temperatures reaching approximately 90°C.
Safety Warnings:
  • High-pressure and high-temperature fluids pose serious injury risks. Always depressurize the system before maintenance.
  • Hydraulic oils can penetrate the skin and cause infections; seek medical attention immediately if injured.
  • Proper disposal of hydraulic or gear oils is required to prevent environmental hazards.
Maintenance Procedures:
  • Hydraulic Hoses: Regular inspection is necessary due to high stress and aging. Replace hoses if damaged or if they exceed a six-year lifespan.
  • Vario-Drive System: Regular checks and maintenance of components like the drive shaft, gearbox, axial piston pump, and motor are required.
  • Oil and Filter Changes: Conduct initial oil and filter changes after 50 operating hours, then every 100 hours or at least annually.
Additional Components:
  • Regularly inspect axial piston pumps, motors, and oil coolers for damage and leaks.
  • Check hydraulic block components for proper function and leaks.
Chassis and Brakes:
  • The spreader uses a hydropneumatic suspension and dual-circuit air brake system. Regular checks are crucial for safety.
  • Drain the air tank daily to prevent corrosion-related damage.
Operational Checks:
  • Ensure the tractor's hydraulic system and electronic controls are active before testing the suspension system.
  • Verify the automatic adjustment of the suspension to the correct driving height.
Environmental Protection Measures
Implement barriers to prevent water contamination and dispose of packaging materials and components through authorized waste management companies.
Disposal Procedures
Professionals should remove and sort all parts and materials from the machine, disposing of waste products according to local regulations.
Warranty and Guarantee
RAUCH offers a 12-month warranty covering material or manufacturing defects, excluding natural wear, improper handling, and external influences. Unauthorized repairs void the warranty. Claims must be made within 30 days of damage occurrence.
See more

Catalog excerpts

AERO GT 60.1-1

Vor Inbetriebnahme sorgfältig lesen! Für künftige Verwendung aufbewahren Diese Betriebs-, Montageanleitung ist ein Teil der Maschine. Lieferanten von Neu- und Gebrauchtmaschinen sind gehalten, schriftlich zu dokumentieren dass die Betriebs-, Montageanleitung mit der Maschine ausgeliefert und dem Kunden übergeben wurde.

 Open the catalog to page 1
AERO GT 60.1-2

Vorwort Sehr geehrter Kunde, durch den Kauf des Ausleger-Mineraldüngerstreuers der Baureihe AERO GT 60.1 haben Sie Vertrauen in unser Produkt gezeigt. Vielen Dank! Dieses Vertrauen wollen wir rechtfertigen. Sie haben eine leistungsfähige und zuverlässige Maschine erstanden. Sollten wider Erwarten Probleme auftreten: Unser Kundendienst ist immer für Sie da. Wir bitten Sie, diese Betriebsanleitung vor Inbetriebnahme des Reihendüngungsgeräts sorgfältig zu lesen und die Hinweise zu beachten. Die Betriebsanleitung erklärt Ihnen ausführlich die Bedienung und gibt Ihnen wertvolle Hinweise für die Montage,...

 Open the catalog to page 2
AERO GT 60.1-3

Bestimmungsgemäße Verwendung 2.1 Zu dieser Betriebsanleitung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 Aufbau der Betriebsanleitung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3 Hinweise zur Textdarstellung. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3.1 Anleitungen und Anweisungen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3.2 Aufzählungen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

 Open the catalog to page 3
AERO GT 60.1-4

Transport ohne Traktor 5.1 5.2 Allgemeine Sicherheitshinweise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Be- und Entladen, Abstellen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 6.1 Übernahme der Maschine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 6.2 Betriebserlaubnis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 6.2.1 Deutschland . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

 Open the catalog to page 4
AERO GT 60.1-5

Dosiereinrichtung freilegen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Abdrehprobe durchführen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Luftführung zusammenbauen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 8.1 Allgemeine Hinweise zum Streubetrieb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.2 Ablauf Düngemittel streuen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.3 Ausleger-Mineraldüngerstreuer für die...

 Open the catalog to page 5
AERO GT 60.1-6

Inhaltsverzeichnis 10.5 Wartung Fahrwerk und Bremsen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 10.5.1 Zustand und Funktion der Bremsanlage prüfen . . . . . . . . . . . . . . . . . . . . . . . 118 10.5.2 Luftbehälter entwässern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 10.5.3 Zustand der Achsfederung prüfen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 10.5.4 Achsfederung auf Funktion prüfen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 10.6 Räder und Reifen . . . . ....

 Open the catalog to page 6
AERO GT 60.1-7

Bestimmungsgemäße Verwendung Bestimmungsgemäße Verwendung Die Ausleger-Mineraldüngerstreuer der Baureihe AERO GT nur entsprechend den Angaben in dieser Betriebsanleitung verwenden. Die Ausleger-Mineraldüngerstreuer der Baureihe AERO GT sind gemäß ihrer bestimmungsgemäßen Verwendung gebaut. Sie sind bestimmt zum Anhängen an eine Zugmaschine, die die Anforderungen gemäß dieser Betriebsanleitung erfüllt. Sie dürfen ausschließlich zum Ausbringen von trockenen, gekörnten und kristallinen Düngemitteln und Schneckenkorn eingesetzt werden. Jede über diese Festlegungen hinausgehende Verwendung gilt als...

 Open the catalog to page 7
AERO GT 60.1-8

Bestimmungsgemäße Verwendung

 Open the catalog to page 8
AERO GT 60.1-9

Zu dieser Betriebsanleitung Diese Betriebsanleitung ist Bestandteil der Maschine. Die Betriebsanleitung enthält wichtige Hinweise für eine sichere, sachgerechte und wirtschaftliche Nutzung und Wartung der Maschine. Die Beachtung der Betriebsanleitung hilft Gefahren zu vermeiden, Reparaturkosten und Ausfallzeiten zu vermindern und die Zuverlässigkeit und Lebensdauer der Maschine zu erhöhen. Die gesamte Dokumentation, bestehend aus dieser Betriebsanleitung sowie allen Lieferantendokumentationen, griffbereit am Einsatzort der Maschine (z. B. in dem Traktor) aufbewahren. Beim Verkauf der Maschine...

 Open the catalog to page 9
AERO GT 60.1-10

Anleitungen und Anweisungen Vom Bedienungspersonal auszuführende Handlungsschritte sind als nummerierte Liste dargestellt. 1. Anleitungen, die nur einen einzigen Schritt umfassen, werden nicht nummeriert. Gleiches gilt für Handlungsschritte, bei denen die Reihenfolge ihrer Durchführung nicht zwingend vorgeschrieben ist. Diesen Anleitungen ist ein Punkt vorangestellt:  Aufzählungen Aufzählungen ohne zwingende Reihenfolge sind als Liste mit Aufzählungspunkten (Ebene 1) und Spiegelstrichen (Ebene 2) dargestellt:  Verweise Verweise auf andere Textstellen im Dokument sind mit Absatznummer, Überschriftentext...

 Open the catalog to page 10
AERO GT 60.1-11

Allgemeine Hinweise Das Kapitel Sicherheit enthält grundlegende Warnhinweise, Arbeits- und Verkehrsschutzvorschriften für den Umgang mit der gezogenen Maschine. Die Beachtung der in diesem Kapitel aufgeführten Hinweise ist Grundvoraussetzung für den sicherheitsgerechten Umgang und den störungsfreien Betrieb der Maschine. Darüber hinaus finden Sie in den anderen Kapiteln dieser Betriebsanleitung weitere Warnhinweise, die Sie ebenfalls genau beachten müssen. Die Warnhinweise sind den jeweiligen Handlungsanweisungen vorangestellt. Warnhinweise zu den Lieferantenkomponenten finden Sie in den entsprechenden...

 Open the catalog to page 11

All RAUCH Landmaschinenfabrik GmbH catalogs and technical brochures

  1. AXIS-H ISOBUS

    106  Pages

  2. AXIS EMC ISOBUS

    110  Pages

  3. K 51

    64  Pages

  4. AXEO

    64  Pages

  5. AXIS M

    18  Pages

  6. AGT

    12  Pages

  7. AXENT 100.1

    4  Pages

  8. TWS 85.1

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.