SWING ARM CORNER (SAC), WRAP & DROP SPAN
8Pages

{{requestButtons}}

Catalog excerpts

SWING ARM CORNER (SAC), WRAP & DROP SPAN - 1

WRAP SPANS AND DROP SPANS BRING MORE ACRES UNDER IRRIGATION

Open the catalog to page 1
SWING ARM CORNER (SAC), WRAP & DROP SPAN - 2

DURABILITY, EFFICIENCY AND LOW-MAINTENANCE A Reinke swing arm corner adds valuable acres under irrigation while reducing • Backed by a factory-trained dealer network the potential for time-consuming and costly maintenance. It starts by using • Adapts to almost any competitive center pivot brand high-strength steel that is 20 percent lighter and 50 percent stronger than • The same, proven structural integrity found in all Reinke products steel used in competitive irrigation systems. This steel is then combined with • Decreased wheel tracking engineering that meets the same uncompromising...

Open the catalog to page 2
SWING ARM CORNER (SAC), WRAP & DROP SPAN - 3

Not only are you bringing more acres closer to their full potential, you can add up to as many as 26 acres depending on the combination of swing arm and components. To view it another way, you can now irrigate 158 out of 160 acres on a quarter section, or 98.7 percent of total acres. In certain field configurations the number of additional irrigated acres increases dramatically. THE REINKE SWING ARM CORNER (SAC) • 280' length provides 370' of coverage or more when end gun throw is included • Allows operators to change the orientation to either a "leading" or "trailing" position to...

Open the catalog to page 3
SWING ARM CORNER (SAC), WRAP & DROP SPAN - 4

NAVIGATOR GPS Navigator GPS is a patented system that precisely guides every swing arm corner with sub-centimeter accuracy. With GPS-based control, it also eliminates the need to bury or maintain guidance cable and, if field parameters change, a new path is easily reprogrammed. • GPS is virtually maintenance-free, saving you time, labor and money • Utilizes RTK surveyor grade GPS for exceptional steering accuracy • Easily adjusts to changing boundaries and obstacles • Ideal for rocky or hard-to-trench soil • Eliminates costly repair to damaged buried wire due to lightning, rodents, heavy...

Open the catalog to page 4
SWING ARM CORNER (SAC), WRAP & DROP SPAN - 5

ESP, ENHANCED WATER PACKAGE, ACCU-CORNER AND ACCU-CORNER PLUS ENERGY SAVER PACKAGE (ESP) ESP is Reinke’s patented, cost-saving sprinkler package for swing arm corners. The Reinke Accu-Corner technology assures even, accurate water application Instead of increasing pressure, it utilizes a series of automatic valves to supply throughout the corner to minimize over or under watering. additional GPM/acre (Not available with the Accu-Corner Plus system). • Programmable logic controller optimizes application uniformity • Save hundreds of dollars every season • Uses 12 groups of sprinklers and up...

Open the catalog to page 5
SWING ARM CORNER (SAC), WRAP & DROP SPAN - 6

10-YEAR, 10,000 HOUR GEARROX WARRANTY -the best wheel gearbox warranty in the industry. GEARBOX 760 Series Gearbox (standard on all Reinke SAC/Super SAC systems): A heavy-duty, final drive gearbox with a 2^" output shaft for added strength and durability. A larger diameter bull gear provides 20% more output than standard 740 series wheel gears. BRONZE BULL GEAR A chill-cast bronze bull gear is used when combined with high-speed drives to provide higher efficiency and longer life. BOOSTER PUMP • Allows for the use of an end gun while reducing the overall pressure of the entire system •...

Open the catalog to page 6
SWING ARM CORNER (SAC), WRAP & DROP SPAN - 7

WRAP SPAN AND DROP SPAN WRAP SPAN Wrap Span Drop Span Whether for buildings, tree lines or unique field dimensions, the Reinke Wrap Span allows you to irrigate acres that were previously off-limits to center pivot irrigation. By placing the Wrap Span system in one or more joints (except the last bendable joint), you can wrap your pivot with or without the SAC or SSAC option up to 180 degrees. Two configurations • Wraps up to 10 degrees – utilizes a standard joint • Wraps up to 90 degrees – uses a span joint that reroutes the water through a flexible coupler DROP SPAN The Reinke Drop Span lets...

Open the catalog to page 7
SWING ARM CORNER (SAC), WRAP & DROP SPAN - 8

MORE RIGHT THAN RAIN Reinke Manufacturing Company, Inc National Sales Office 1040 Road 5300 Deshler, Nebraska 68340 www.reinke.com Manufacturing Facilities: ■ Deshler, Nebraska ■ Belleville, Kansas ■ Beijing, China Warehouse Facilities: ■ Deshler, Nebraska ■ Amarillo, Texas ■ Johannesburg, South Africa ■ Rostov, Russia ■ Brisbane, Australia Office Locations: ■ Deshler, Nebraska ■ Beijing, China ■ San Luis Potosi, Mexico ■ Moshav Korazim, Israel ■ Rostov, Russia ■ Venado Tuerto, Argentina

Open the catalog to page 8

All REINKE Irrigation catalogs and technical brochures

  1. REINCLOUD

    3 Pages

  2. RS300

    3 Pages