MDB 130

MDB 130

MDB 130

Product catalog summary
Specifications:
  • Cutting Width: 60 inches
  • Transport Width: 60 inches
  • Overall Width: 69 1/2 inches
  • Overall Length: 83 1/4 inches
  • Cutting Height: Adjustable from 1 1/2 inches to 12 inches
  • Hitch Compatibility: CAT 2 Std & CAT 3 Std
  • Blade Carrier: Infinity - Cast
  • Blade Dimensions: 1/2 inch x 4 inches
  • Blade Rotation: Counter Clockwise
  • PTO HP Required: Minimum 60 HP with 25% of weight on front wheels
  • Minimum Tractor Weight: 5,000 lbs
  • Gearbox HP: Center: 100, Deck: 130
  • Tractor PTO Speed: Available in 540 RPM and 1000 RPM
  • Drive Type: Mechanical
  • Mechanical Breakaway: Standard
  • Blade Tip Speed: 13,904 (540 RPM), 14,128 (1000 RPM)
  • Horizontal Reach (Max): 130 inches
  • Cutting Capacity (Max): 2 inches
  • Driveline Size: CAT 4
  • Overload Protection: Slip Clutch
  • Deck Thickness: 10 Gauge
  • Side Skirt: 7 Gauge x 9 1/8 inches
  • Range of Head Movement: 40° Up / 40° Down
  • Skid Shoes: Standard
  • Safety Guarding: Single Chains
  • Weight (Approx): 1,900 lbs
Contact Information:
  • Address: 1020 S. Sangamon Ave, Gibson City, IL 60936
  • Phone: 800-221-2855 (Option 3)
  • Fax: 877-408-3298
  • Website: www.rhinoag.com
See more

Catalog excerpts

MDB 130-1

130” Horizontal Reach Available in 540 or 1000 RPM 60” Cutting Width Slip Clutch Protection 2” Cut Capac

 Open the catalog to page 1
MDB 130-2

MEMBER OF THE ALAMO GROUP ALWAYS ON THE CUTTING EDGEn 1020 S. Sangamon Ave i Gibson City, IL 60936 TEL: 800-221-2855 (Opt 3) i Fax: 877-408-3298 WWW.RHINOAG.COM

 Open the catalog to page 2

All Rhinoag catalogs and technical brochures

  1. TR300 SERIES

    2  Pages

  2. TR200 SERIES

    2  Pages

  3. FLEX-WINGS

    6  Pages

  4. RC FLAIL

    2  Pages

  5. TS10

    2  Pages

  6. ACG10

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.