GENERAL CATALOGUE

Product catalog summary

Hippodrome System Technical Specifications

This document provides detailed dimensional and parameter specifications for components of the Hippodrome system, likely related to pipe or structural tubing elements.

1. Dimensional Tables for Various Diameters and Lengths

The document contains multiple tables listing measurements for components with different outer diameters (Ø) and lengths (L). The diameters specified are 114.3 mm, 141.3 mm, 168.3 mm, 88.9 mm, and 219 mm, with lengths ranging from 0.6 m to 59.4 m depending on the table.

Key Parameters Defined:

L (m): Length in meters
Ø (mm): Outer diameter in millimeters
A, A1, B, C1, D1ª, D, E, L, G, H: Various dimensional parameters, likely wall thicknesses, clearances, or other critical measurements (units not explicitly stated but consistent across tables)

2. Parameter Consistency Across Diameters

For diameters 114.3 mm, 141.3 mm, and 168.3 mm, the parameters A, A1, B, C1, D1ª, D, E, and L remain constant across different lengths, indicating standardized component profiles:

A = 4.22
A1 = 4.06
B varies slightly with length but closely matches L values
C1 = B - 0.5 approximately
D1ª = 3.675
D = 3.33
E = 5.3
L = 4.06

3. Additional Table for Mixed Diameters and Lengths

Another table lists parameters G, H, and L for various lengths and diameters, including mixed diameter ranges (e.g., 141.3-88.9 mm). These parameters vary with length, suggesting different structural or mechanical properties for these configurations.

4. Notations and Symbols

The document includes symbols such as D1ª and superscripts (e.g., C¹, C², C³) which likely refer to specific measurement points or standards within the system, though explicit definitions are not provided.

Summary of Critical Information

The Hippodrome system components are standardized by diameter and length with fixed dimensional parameters.
Parameters A through L define critical dimensions necessary for manufacturing or assembly.
Consistency in parameters across diameters suggests modular design.
Mixed diameter entries indicate adaptability or transition components within the system.

This structured data is essential for engineers and technicians involved in the design, fabrication, or quality control of the Hippodrome system components.

Catalog excerpts

Automatic Systems GENERAL CATALOGUE

Open the catalog to page 1

The pyramidal structure of the RKD central pivot is built up with galvanized-steel angular profiles and the bolts are anchored to a square reinforced concrete platform. Both of these result in the RKD pivot's having a remarkable sturdiness and stability which allow it to handle the turning movements of The pivot is water-fed through a vertical inlet pipe and elbow, both made of galvanized steel of 8 5/8" (219mm) diameter, except model 450, which has a vertical pipe of 5 1/2" (139.7 mm) diameter. It contains a 13-way external electrical collector ring and an access ladder. The standard height...

Open the catalog to page 2

RKD pivot for irrigation in several This works similarly to the center pivot, but it can be transported automatically in order to irrigate 2, 3, or more positions, providing a high increase of irrigation area with only one machine. This is a self-propelled system and neither a tractor nor any other kind of machine is needed to change its It moves sideways, and may be guided with alignment performed by means of a furrow or a cable; all required security systems are provided. It does not require the turn of the tower's wheels The revolving main cart has two driving wheels, used for the circular...

Open the catalog to page 3

Front-advance lateral irrigation system. RKD Lateral Systems are suitable especially for irrigating rectangular plots and are guided by a precise system of alignment by means of a furrow The cart is mounted on two or four driving wheels and the feeding of the equipment can be accessed by means of a hose connected to one or more hydrants, depending on the dimensions of the plot and the volume of flow it must provide; or by means of a motor-pump group fixed on top of the main cart, which takes the water directly from a ditch to feed the system. DITCH FEED LATERAL SYSTEM LATERAL SYSTEMS 2 wheels...

Open the catalog to page 4

HIPPODROME SYSTEM RKD's circular and lateral irrigation RKD hippodrome systems have been designed to irrigate square, rectangular or unusually shaped plots, allowing lateral irrigation and making the turn possible by pivoting at one or more points, internal or externally. They are able to irrigate when necessary, without requiring the anchoring

Open the catalog to page 5

RKD produces all the frameworks with high-quality steel, manufacture and origin certificate, both for piping and rolled steels. Our pipes stand out from other brands thanks to the larger wall thickness (3mm standard), The structure is designed by means of computer-assisted programmes, entirely symmetrical, so that a completely regular curvature of the span is produced, which gives it a greater resistance both to its own weight and water contents, as well as to the lateral effects caused by wind loads. The whole of RKD framework is hot-deep- galvanized according to UNE-EN ISO 1461:1999 standards...

Open the catalog to page 6