MIXER H
2Pages

■ LOOSE MATERIAL MIXERS MIXER H PRINCIPLE 1. Basic mixing effect is provided by rotation of two rotors, each of which is equipped with two counter-wound spirals. This follows in intensive stirring of particles. 2. Secondary mixing effect is provided by carrying the material to the longitudinal trough walls, and sliding back to the whirl between worms. 3. The third effect is brought about by axial pressure of the material onto the fronts of twin-compartment trough and successive pouring of the material to the other rotor. This complets a cycle, when one rotor forces the charge through one half of the trough and the second rotor forces it through the second half in the opposite direction. MAIN ADVANTAGES: > Systematically validated accuracy -stirring ratio higher than 1 : 10 000 > Low construction height > Unification with ROmiLL roller mills > Weighing all components on one tensiometric scale se of compact and variable mill Start even by fully charged machine DETERMINATION MIXER H twin-rotor horizontal mixers were developed for homogenisation of groats of all grain types and other modified plant raw materials together with small amounts of specific feeding complements - micro components. ANOTHER USE The equipment serves for quick and efficient mixing of loose stuff components of various kinds and types, in a number of processing industries. It is used not only for biological materials, but also for inorganic materials. The stainless version is suitable for food industry, manufacturers of chemicals, etc. ACCURACY By the stirring ratio higher than 1 : 10 000, uniform nutrients distribution can be achieved, which corresponds to the prescribed recipes for the particular kind and category of animals. Accuracy validation was performed by Central Agricultural Institute for Testing and Inspection in compliance with Czech Laws. PERFORMANCE PROPERTIES according to mixture, capacity of charging lines and discharging mechanisms * including ch arging and discharging g MAIN USERS As the ROmiLL mixers feature high accuracy, quick homogenisation of materials and suitability for the variable integration in the technological lines, they ensure optimum mixing in middle capacity feed mills. They are used by middle and larger agricultural companies, cooperatives, and even by the farmers.

Compact and variable feed mill Unit with mixer, diminuting machines and strain-gauge scale, with storage tanks, conveyors, chargers, paddles, flaps etc. form an integrated, reliable, effective and accurate feed mill, which features long service life, full-automatic operation and favourable price. This concept suits ideally for mills with yearly production of 800 to 6000 tonnes feed mix in one-shift operation. Rugged and reliable design The basis is a support frame on four stands, with self-contained trough, fastened by ribs. Two mixing worms are located in bearings on the trough fronts....