Panther
40Pages

Superior class.

✔ practice-oriented and innovative ✔ harvesting the entire beet crop ✔ excellent reliability – sturdy construction ✔ long lasting and of stable value Professional machines of superior

✔ new chassis - more operational safety in wet conditions ✔ levelling on slopes and higher driving comfort ✔ new cabin of easier operation ✔ large tank capacity – high daily performance ✔ reduced fuel consumption ✔ less wear and tear ✔ more so

Anti Shake and Balance System Hydraulic wheel load compensation system with fully automatic slope levelling ✔ 2 swing axles with 4 stabilization cylinders ✔ 0 % less rolling motion on the chassis and steering 5 sensor -> exact row guidance, less damaged beet ✔ lower material wear, extended useful life ✔ hydraulic connection of the stabilization cylinders from the each side ✔ compensation of wheel load between front and rear axles -> better traction and soil protection ✔ more slope stability, less risk of tipping over ✔ better lifting depth control, less soil pickup ✔ large-sized Michelin...

Anti Shake and Balance System Uneven surfaces (e.g. when driving along a furrow) are transmitted only half to the frame thanks to roll stabilization of the chassis! Optimal surface contour adaptation by means of two swing axles with stabilization cylinders - cabin, bunker and chassis remain in horizontal position. Hydraulic wheel load compensation system with computer-controlled slope level adaptation For sugar beet harvester by type ROPA Panther has developed a new chassis design with 2 swing axles in connection with 4 stabilization cylinders. Compared with the previous chassis of the...

Stabilization cylinder (swing rear axle) Inclination sensor Angle sensor Inclination sensor Stabilization cylinder (swing front axle) Angle sensor On a side slope wheel load compensation between front and rear wheels on the hill side of the chassis swing, the row and depth control is improved simultaneously, as the frame is averaged to the position of the both axles. Stabilization cylinder

ROPA Panther is a technically perfect two-axle harvester New ROPA Panther is a two-axle sugar beet harvester, developed with visionary concept. Numerous new developments of ROPA Panther have resulted in a better yield and higher daily performance by efficient and soil-protective sugar beet harvesting. Well-proven features and detailed solutions are combined in new Panther together with the latest technical innovations from company ROPA. „Extremely huge paws“, automatic wheel load and slope compensation with roll stabilization, super long un

loading elevator, automatic folding for fast changeover from road to field mode are only few of numerous innovations. The new intuitive operation concept R- Concept in the newly designed R-Cab sets new standards for selfpropelled harvesting technic.

PIS - ROPA integral defoliator, standard model for normal harvesting conditions Leaves are mulched with robust defoliator’s knives from the beet crowns and spread between the rows. Therefore, beet leaves with all their nutrients are evenly delivered to the soil -> an optimal condition for further soil cultivation as green waste transforms fast into humus. The rotor rpm can be conveniently adjusted, from the cabin from rough to fine structured mass. Similarly, the all-round defoliator (pictured above, right) can be switched to integral approach, so that the beet field can be lifted up...

PAS – all-round defoliator Integral leaf-layer

PAS - ROPA all-round defoliator with 380 mm leaf auger and large leaf-spreader (can be changed from the cabin for either integral topping or leaf ejection) With the ROPA all-round defoliator you are ready for all requirements. Optionally, the shredded beet leaves are placed between the rows or spread by leaf auger/ leaf-spreader over the lifted area. You can easily switch by pressing a button in the cabin. To harvest the beet leaves (for biogas or dairy) an optional leaf conveyor can be attached.

To harvest the whole beet ROPA has further developed the sugar beet leaves cleaning. ROPA defoliator PES is an alternative The newly developed defoliator with rubber flails from ROPA has independently hydraulic driven flails which allow individual rotor speed control - unique system! Each rotor shaft can be adjusted

to well-proved and cost effective Micro-Topper at the height independently from the other. As a result, the operator can react quickly and effectively to different requirements due to changing beet crops. Various settings can be stored and accessed on the joystick using a memory function.

... certainly more yield! The topping shaft is led so high, that the leaf cuttings are remained on the beet. ROPA Micro-Topper - maximum revenue with no additional effort ROPA Micro-Topper is the best practical solution that simultaneously meets the requirements of farmers, contractors and sugar mills! ROPA Micro-Topper provides the ability to harvest the whole beet heads without tops. At reduced rounds per minute the topper is lifted so high that each beet head is remained with the leaf cuttings. Thus, the useful life of defoliator cutter is increased (less contact with the ground...

Harvest the whole crowns! ROPA’s Micro-Topper increases your yields. The comb of Micro-Topper detects the height of each beet crown and “shaves off” the leaves. lows each beet head, adjusting the trimming gap to the size of the head, so that the beet is cut not too much and returns maximum yield. The intensity of the cut can be easily adjusted from the cabin. You may choose between topping and "shaving off" leaves only (micro-toppin

Hydraulic stone protection, positioned on top, maintenance-free linear guide Faster oscillating share drive with axial-piston motor and spur gear, adjustable taper roller bearings. Depth control wheels with variable row width of 45/50 cm, adjustable with a button push from the cabin Non-jamming PR lifting unit with hydraulic stone protection The PRh lifting unit is equipped with counter-rotating oscillating shares and maintenance-free stone protection. Lifting units are supplied with 45 cm and 50 cm. The variable lifting unit can be easily switched from 45 cm to 50 cm from the cabin. The...