Catalogs >
ROSSELLI Snc Officine Meccaniche >
Saw bench for sawing wood with electric motor M-350 M-360 M-365 - Rosselli Snc

Saw bench for sawing wood with electric motor M-350 M-360 M-365 - Rosselli Snc
1 / 2Pages

Catalog excerpts

Saw bench for sawing wood with electric motor M-350 M-360 M-365 - Rosselli Snc - 1

Circular saw Sliding table Ø 550 Ø 600 Electric motor PROTECTION GRID Special cutting area protection shield LOCKING SYSTEM Special wood locking system for perpendicular cutting and accurate HOOK FOR LOCK THE TABLE Hook to lock the sliding table during transport PROTECTION GRID TRANSMISSION WITH BELT Protection grid of the cutting area Equipped with a 3-belts transmission for a better and more efficient cut KEY TO REPLACE THE BLADE Special key to remove and change the cutting blade TRANSPORT HOOK Hook to lock the jaw during transport THICKNESS OF IRON SHEET Sheet thickness between 3 mm and 5 mm EXPULSION OF WOOD SCRAPS Predisposition for chip extractor with protection grille SWITCH WITH MOTOR BRAKE Special switch to stop blade rotation in less than 5 seconds STANDARD TABLE EXTENSION Foldable left side table extension to save space

Open the catalog to page 1

Saw bench for sawing wood with electric motor M-350 M-360 M-365 - Rosselli Snc - 2

SECURITY SYSTEM -In the event of a blackout, the switch turns off the machine. Once the problem has been solved, the machine must be switched on again by the operator, this to avoid restarting in uncontrolled situations. -Switch with thermal relay which prevents motor overheating, to avoid damage to the machine. -Safety switch, to be activated in an emergency to brake the blade in less than 8 seconds. This circular saw offers the possibility of working comfortably near your house or warehouse thanks to the single-phase / three-phase electric motor with which it is equipped. With this saw,...

Open the catalog to page 2