video corpo

Combine Harvester TORUM 750
2Pages

{{requestButtons}}

Catalog excerpts

Combine Harvester TORUM 750 - 1

Headers POWER STREAM1 header, 7/9 m Cutterbar drive based on planetary gear case Knife speed [stroke/min] Reel-to-ground speed synchronisation system ACTIVE STREAM 540/630/690/780 header with hydraulic table extension 0...700mm, 5.4/6.3/6.9/7.8/9.4m POWER STREAM II 540/630/690/780/940 header with mechanical table extension 0...250mm, 5.4/6.3/6.9/7.8/9.4m FLOAT STREAM 700/900 close-cut header with flexible cutterbar, 7/9 m DRAPER STREAM 900 draper header, 9 m ARGUS, CORN STREAM corn header, 8 rows (70/75 cm row spacing), 12 rows (70 cm row spacing) FALCON 870/875/1270/1275 sunflower header, 8/12 rows SUN STREAM 1050/920/780 sunflower header, 10.5/9.2/7.8 m SWA PICK 342/432 windrow pickup, 3.4/4.3m Electrohydraulic ground contour following system Multicoupler Crop lifters Header trailer Cart hitch Feeder house Type Rugged design Stone trap Electrohydraulic ground contour following System Multicoupler AFH2 feeder house Thresher Thresher width [mm] Stone trap Advanced Rotor System (ARS)3 Rotor diameter [mm] Total rotor length [mm] Rotor drive Rotor speed [rpm] Concave wrap angle [deg.] Cleaning sieve area [sq. m] Cleaning fan speed [rpm] In-cab electrical adjustment of sieves Self-contained rotor-type rethresher Hard-to-thresh crop kit ENGINE SYSTEM The TORUM 750 comes with L6 Cummins engine. Powerful and compact, the engines have a good specific fuel consumption and a good torque backup. The air cleaning system uses an air intake screen with forced rotation (by a hydraulic motor), which significantly reduces the maintenance effort. The special rotating vane between the coolers provides their self-cleaning thereby increasing useful operating time. NEW FEATURES             Сhain-and-slat, with accelerator and adjustable for/aft tilt      1,500   762 3,200 hydromechanical 250 to 1,000 360 5.20 335 to 1,050    For TORUM, two styles of feeder houses are available – a conveyor-style feeder house with forward angle adjustment (particularly useful when harvesting soybean), and AFH (Feed&Boost). A conveyor-style feeder house adds a lot more capabilities to a combine and makes it much easier to operate in various crops. Come with a hydraulic multicoupler as standard, has adjustable forward angle for better performance and ease of cutting all crops without the need to convert, with quick connection of headers (headers weighing up to 4,500 kg). The pivot-mounted conveyor provides a better feed throughput in high-yield crops, and reduces the risk of repair when operating on stony soils. For rice harvesting, the optional AFH (Feed&Boost) is recommended. This feeder house is unique in that the traditional chain-and-slat conveyor is replaced by three feeding beaters with special elements. The beaters evenly spread and accelerate the crop material before it enters the rotor thereby ensuring a steady workflow when handling non-uniform windrows and crop material with high moisture and weed content. ROTARY CONCAVE ROTOR (ADVANCED ROTOR SYSTEM) The concave area on the rotary harvesters with a fixed concave is not used completely, which reduces a potential performance. In addition, when you harvest damp crops or rice, the top of concave becomes plugged (the so called dead zone). The rotating concave allows using 360° of the concave surface and avoiding dead zones and the rotor plugging. Besides, the concave has three threshing sections that allow setting a threshing clearance in one section. Thanks to this, the material is threshed three times with one round of the rotor unlike the single threshing in conventional rotor units. The same principle allows setting the increased threshing clearances. No additional adjustment of concave is required depending on crop harvesting conditions: for crops from barley to wheat the threshing clearance is set between 16 and 25mm. INFINITELY VARIABLE ROTOR DRIVE The rotor is driven by the planetary CVT with hydraulic control - a unique hydro-mechanical device, which combines the advantages of both types of drives: smooth and accurate speed control, high bearing force and reliable beltless transmission. AS CLEAN AS CAN POSSIBLY BE The two-stage cleaning system with sieve area of 5.2 m2 matches the unrivalled capabilities of the rotor. The powerful hydraulically driven two-section fan creates an even air flow over the fan sieves and prevents dead zones in the middle of the sieve box. This guarantees the truly clean grain. COMFORT CAB II WITH ADVISER IV INFORMATION SYSTEM The TORUM 750 comes with Comfort Cab II. Climate control, can noise insulation and suspension system, air-suspended operator seat, additional assistant’s seat, beverage cooler, Adviser IV voice information system and Agrotronic remote monitoring system come in base. Adviser IV voice information system continuously monitors the threshing process and the functioning of harvester mechanisms, and allows monitoring the process stability and preventing the failure of units. FAST UNLOADING The clean grain goes into the 10,500 L grain tank. This capacity increases the performance by reducing the unloading cycles. The unload rate is 105 L/s, it takes no more than 2 minutes to empty the full grain tank. The unloading auger length is increased to at least 5.7 m, the unload height is 5.2m, the reach angle being 105 degrees. This allows an easy unloading of grain into any trucks and trailers, even when a 11‑m header is used. When harvesting rice, you can unload it without leaving the bay. To save fuel, the thresher drive can be disengaged. UP TO THE LAST GRAIN Before getting into the chopper, straw undergoes a final separation through the beater with the grate-type concave installed after the rotor. CHOPPER WITH AN INTEGRATED CHAFF SPREADER Combining the chaff and straw flows results in a more even spread of the chopped material over the field. HIGH QUALITY OF STRAW The separating part of the rotor has auger flights. T

Open the catalog to page 1
Combine Harvester TORUM 750 - 2

Grain tank with unloader Grain tank capacity [L] Minimum unload rate [L/s] Unload height [mm] Vibrating agitators Attachments for cop residue management Cab Comfort Cab II4 specification Adviser IV5 information system Agrotronic agromanagement platform Automatic guidance system Yield and moisture mapping system Unloading area and rear view video monitoring system Automatic Centralized Lubrication System Tailing return assessment system 4D fore/aft levelling system Ground drive Transmission Transmission Road speed [km/h] Drive wheel tyre type Rear wheel tyre type Removable tracks AWD Engine...

Open the catalog to page 2

All ROSTSELMASH catalogs and technical brochures

  1. General catalog

    144 Pages

  2. RSM 1300

    2 Pages

  3. RSM 161

    2 Pages

  4. TORUM 765

    2 Pages

  5. ARGUS

    2 Pages

  6. CORN STREAM

    2 Pages

  7. SUN STREAM

    2 Pages

  8. FALCON

    2 Pages

  9. SATELLITE

    2 Pages

  10. VECTOR 425

    16 Pages

  11. ACROS 590

    16 Pages

  12. RSM 1403

    13 Pages

  13. ACROS 580

    16 Pages

  14. DON 680M

    2 Pages