User Guide Original User Guide

TABLE OF CONTENTS TABLE OF CONTENTS DISCLAIMER GENERAL INFORMATION GENERAL SAFETY RULES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . OPERATOR'S GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MAINTENANCE INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TROUBLE SHOOTING GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DECLARATION...

Disclaimer The original, authoritative version of this manual is the English version produced by ROXELL BV. Subsequent changes to any manual made by any third party have not been reviewed nor authenticated by Roxell. Such changes may include, but are not limited to, translation into languages other than English, and additions to or deletions from the original content. Roxell disclaims responsibility for any and all damages, injuries, warranty claims and/or any other claims associated with such changes, in as much as such changes result in content that is different from the authoritative Roxell-published...

– General information General information IMPORTANT: These instructions must be read, understood and all points observed by the user, the responsible and operating personnel. Obey the legal regulations and the applicable rules This concerns, among other things, the European regulations and directives transposed into national legislation and/or the laws, safety and accident prevention regulations that apply in the user's country. During assembly, operation and maintenance of the installation the legal regulations concerned and the applicable technical rules must be obeyed. The installation has...

– General information Technically trained person An expert who can assemble and maintain the installation (mechanically/electrically), and resolve malfunctions. On the basis of his/her technical training and experience, he/she has sufficient knowledge to be able to assess activities, recognize possible dangers and rectify dangerous situations. Put all parts to be assembled in a room or at a location where the not yet assembled components are protected against weather influences. Depending on the size of the parts and according to local circumstances and local legislation, the parts of the machine...

– General information LOTOTO = Lock Out - Tag Out - Try Out Before you begin: Everyone needs his own lock and tag (label), which can’t be removed by other persons. Inform all the persons who are influenced by the procedure. Localize all sources of energy (electric, hydraulic, pneumatic). Switch off. Take the relevant installation or process out of operation and lock it against reuse. You can do this by placing a padlock or other blocking mechanism (Lock Out). To mark Attach a sign, label or sticker to the padlock or blocking mechanism to reveal the nature and the expected duration of the work...

– General information Information about the residual risks - used safety signs There are three levels of danger, which you can recognize from the following signal words: • DANGER • WARNING • CAUTION The nature and source of the imminent danger and possible consequences of not obeying warnings is stated here! Symbol Meaning DANGER indicates a direct imminent danger that can result in a serious or even fatal accident if the safety measures are not respected. WARNING indicates a possible imminent danger that can result in a serious accident or damage to the product if the safety measures are not...

GENERAL SAFETY RULES Dos7 Nr. : 040... Automatisch voedersysteem voor individueel gehuisveste zeugen Automatic feeding system for individual sow feeding IMPORTANT DANGER Carefully read the following instructions before USING the system 1. Before you do any repair, or maintenance works, always disconnect the electricity supply by switching off the main switch. 2. Ensure you wear personal protective equipment (gloves, dust masks). 3. With normal use the opening system starts automatically. Never put your hands on opening tubes or cables before you have completely switched off the electricity supply...

OPERATOR’S GUIDE TO SHUT OFF THE DISPENSERS TO ADJUST THE AMOUNT OF FEED 1. First you need to calibrate the scale [liter] with your special feed, because the scale is an indicative one (look next page). 2. Use the white scale for pellets and the yellow scale for mash. 3. Move the slide to the desired amount of feed. 4. Example for pellets : to feed 2 kg pellets, you set the slide handle at 3,2 litres on the white scale. 5. You adjust the same quantity for each group. 1. If a sow pen is empty or will become empty, shut off the dispenser with the shut-off slide. 4 2. Do this when the dispenser...

OPERATOR’S GUIDE CALIBRATION OF THE DISPENSER The indication of the volume on the ROXELL dispenser for mash and pellets is an indicative scale and can differ from the usage of your specifically used feed. For an exact feed dosage ROXELL recommends to calibrate the scale of the dosage with your specific feed before production. 1. Use a dispenser which is installed on your feeding system. 2. Choose an indicative scale on the dispenser on the feed (mash or pellets) in use. 3. Place the slide handle on the chosen scale at 1 l and fill the dispenser by the filling system. 4. Empty the dispenser and...

MAINTENANCE INSTRUCTIONS Switch off the main switch first. Use personal protective equipment. ACTIONS IN GREY BACKGROUND MUST BE DONE BY A TECHNICALLY TRAINED PERSON. 6-monthly 1. Power unit - Make fan dust-free - Check possible damages to electrical wiring - Check possible damages TROUBLE SHOOTING GUIDE Switch off the main switch first. Use personal protective equipment. ACTIONS IN GREY BACKGROUND MUST BE DONE BY A TECHNICALLY TRAINED PERSON. CORRECTIVE ACTION Adjust switch. ”Up” switch does not work. Check switch. Thermic switching off of the motor. Orange lamp lights. Check thermic protection....