DRUM AND DISC MOWERS REAR, FRONT, TRAILED DOUBLE-SIDED AND COMBINATIONS

The fodder made of grass is one of the best and at the same time the cheapest nourishment for livestock.By using the proper equipment it is possible to reach the swath, which can be easily processed to very nutritious fodder for cows. SaMASZ agricultural machines are the guarantee of reaching the most valuable fodder from the mowed area. The solutions used in our machines have been developed by SaMASZ engineers for more than 35 years. For a long time they have been one of the most desired equipment, sought all over the world, because owing to them the fodder will suffice for longer time. It happens,...

Special mowing drums transport cut material and lay it down into a smooth swath. Thanks to hydraulic lifting (optional equipment), mower can be easily transported at the rear or side of the tractor. Advantages: • Genious invention of 20th century - cuts perfectly either lying grass or very high sedge-cane, • Factory set 5,8 cm (2”) cutting height, regulated by distance rings, • DLG Signum Test, • Solid and tough design, • Idling running: • on PTO shaft (Z 010/2) • on pulley (Z 010 and Z 010/1), • Safety breakaway device, • Additional knives and mounting lever, Ideally fitted to the ground and...

Front drum mowers are characterized by perfect ground following, thanks to suspension with support springs. Mower is transported with side covers uplifted. Thanks to this, the transport width is reduced significantly, which then provides a problem-free drive. Combination of front and rear mower, allows to obtain working width up to 6 m (20'), which greatly improves work efficiency. Advantages: Double support springs, Tractor's triangle cat. II in standard equipment, Stone tested safety guards (PN-EN ISO 4254-12), PTO shaft with overrunning friction clutch in standard equipment, Adjustable mowing...

New LiteCUT cutterbar is another model of the cutterbar installed in lightweight mowers - SAMBA. Designed for operation on smaller farms and on hilly and swamp areas. Completely new design provides reliability, high durability and precise cutting line, and all that with reduced power demand. I ‘ T Disc mowers with LiteCUT cutterbar LitsCUT Samba 160, Samba 200, Samba 240, Samba 280, Samba 320 Design • lightweight, durable, bolted • thick, 5 mm / 13/64" steel shell Disc module with system additional protection for gears inside the cutterbar strong, sealed bearings quick and easy module replacement...

SAMBA300F Advantages of the Alpina disc mower: • lightweight and robust design. • adjustable swath width and mowing height from 4.5 cm to 7 cm and optional • extension by up to 3 cm with high mowing skids. • Perfect ground tracking in three planes and minimal ground pressure guarantee even cutting without damaging the turf. • convenient transport with foldable side covers. • ease of use due to the possibility of changing the direction of rotation by returning the gearbox and cooperation of the machine with tractors with left or right PTO rotation. • quiet operation. • low operating costs (most...

PERFECT OPERATION cutterbar Disc module with System SafeGEAR • additional protection for gears inside the cutterbar • strong, double - sealed bearings • quick and easy module replacement even in the field • reusable after key replacement PerfectCUT cutterbar : KDT, KDTC, KT, KDC, TORO, KDF, KDD, KDD-R, and combinations MegCUT and GigaCUT • lightweight, durable, bolted • thick, 5 mm / 13/64’’ steel shell Basing on the experience of our customers around the world we have introduced to our production the Perfect CUT cutterbar. Precise cut, high durability of components, protection against sudden...

Rear disc mowers KDT KDT 220, KDT 260, KDT 300, KDT 340, KDT 341 KDT is the most frequently purchased range from SaMASZ offer. Since the beginning of their introduction to the market, KDT mowers have been used by thousands of customers around the world. Made of best quality materials are a reasonable choice even for the most demanding customers. The machine can be equipped with light-weight conditioner with plastic tines (SL version), which is 25 kg (55 lbs) lighter than the standard one. Mechanical safety breakaway device (with hardened inserts) In case of hitting an immovable obstacle the breakaway...

Rear disc mowers KDTC Exceptional ground following KDTC 261, KDTC 301, KDTC 341 KDTC 2615, KDTC 261W, KDTC 3015, KDTC 301W KDTC mowers have been the first disc mowers with central suspension in our offer. They have been manufactured since 2008 and have gone through modernization in order to be up to the present market demands. Developed and thought-through design is an economic alternative to KT mowers. Unlike KT psrfectcuT Cutterbar *more on p. 12-13 mowers, KDTC mowers have no possibility of applying hydropneumatic suspension. They feature a single transport position (KT has 3 positions). KDTC...

Rear disc mowers KT KT 261, KT 301, KT 341 High operating speed, modern design, quick knife replacement system, central spring or hydropneumatic suspension, 3 transport positions - these are only a few advantages of KT disc mowers! The same solutions for all models KT 261 S, KT 261 W, KT 301 S, KT 301 W Hydropneumatic suspension Safety guards Thanks to hydropneumatic suspension, an operator can easily adjust ground pressure of the cutterbar by means of tractors hydraulics. Owing to that the ground pressure is always the same (no matter how the terrain is shaped). Hydropneumatic suspension is...

Unique quality of forage Tine and roller conditioners KT 261 S, KT 261 W, KT 301 S, KT 301 W • Wide rollers along the cutterbar increase efficiency of crushing stems of caney • Several times faster grass drying owing to breaking wax layer on a leaf blade • Cutting wax layer through, facilitates „grass breathing”, which reduces losses in plants nutrition value, and increases swath density • Elimination of tedding (fewer drives) • Free presentation of material in wide swath, as well as reducing and balancing its density enables easy pick up for baler or self-collecting trailer • Increased space...