COMIA COMBINE HARVESTER
24Pages

COMIA COMBINE HARVESTER

SAMPO COMIA IS AN ADVANCED COMBINE HARVESTER MODEL. COMIA is an outstandingly efficient combine which is suitable for big and middle size farms. A superior performance and agile manoeuvrability make the longest working day like a walk in the park. The COMIA have been harvesting in many locations, offering a wide variety of conditions, around the globe, including from very dry to crops with high moisture content. Find out more at your local dealer or www.sampo-rosenlew.fi

MEET THE COMIA EXPERIENCE!

GEN3 -TO IMPROVE YOUR HARVESTING. The third generation (GEN3) of the widebody SAMPO chassis, are also 3 major improvements, not just the improvement of the chassis. Since 2001, this is the third time major technical improvements are done to this wide body chassis. To finalize the straw walker category of combines, we are now introducing a new model also COMIA C14. The wide body straw walker SAMPO combines are from C10 to C14.

COMIA C14 -10.000 LITRES OF SPACE The COMIA family got a new member. The C14 model is based on the C12, but we are introducing it with the biggest grain tank ever, 10.000 litres. The tank lids can be folded up from the cab and the height of the combine is then 5 meters. In transport position the height of the combine is 4 meters. While opening the lid covers the grain elevator go to working position also. In the tank there are two bevel gears which continues the grain transport to the highest point of the grain tank. Now the auger can spread the material evenly in the tank. The fast...

3 MAJOR COMPONENTS Listing to our customers’ demands and needs, during the years have we developed these solutions. To bring more uptime to the harvesting day is the main topic. The new robust variator pullies, the bigger capacity grain elevator and most of all the improved sieve area with the new fan. These all 3 major updates will improve the wide body COMIA line to new and bigger harvesting capacity levels.

EFFICIENT SHAKER SHOE AREA Many points of this area have been improved. The fan with six blades, is now blowing with a great “torque” evenly of the whole sieve area. The speed range goes from 515 to 1100 rpm, which is a wide range. The grain pan is now in a higher position than before, comparing to the sieve area. Through this space, there is an airstream blowing and sorting the material to a thinner layer before hitting the upper sieve. The traditional air stream is coming from below through both sieves as usual. With this improvement, we get a higher capacity all over the sieve area. The...

Thanks to years of careful design, whether the growth is tall or low, the COMIA cutting table can easily handle it. The optimal distance from the knife to the feeder auger ensures uninterrupted feed to the machine’s feeder elevator COMIA C6 TO C14 • Header widths 3,9- 6,3 m • Automatic reel speed adjustment • AHC- header automatic available • Hydraulic header reverse • Service friendly WB-knife drive

KNIFE The COMIA line uses modern screw-on knife blades. In the event of a failure, you can easily replace a knife blades. The knife is operated by a belt-driven Wobble Box drive. WB knife drive is almost maintenance free. FEEDER AUGER The large diameter of the feeder auger prevents wrapping in even the most demanding conditions. To achieve even feed, the number of fingers has been increased according to the table width. When fingers are spread evenly across the entire auger, even peak loads will not cause problems. PICK-UP REEL The plastic pick-up reel tines ensure efficient and gentle feed...

THRESHING MECHANISM The threshing mechanism on the picture features a COMIA C12 and C14. CSP -separation drum Up to 20% more straw walker capacity. For moist North-European conditions. Threshing cylinder Straw walkers The wide and big cylinder is efficient and gentle. Accordingly, to field tests, adding a pair off straw walkers, it increases straw walker output by 10%. Depending on the model 5 or 6 straw walkers. Shaker shoe Large shaker shoe area. 3,40 – 4,50 m2 depending on the model. Pre-threshing cylinder 20% more efficient than a single cylinder combines. Return system An efficient...

SHAKER SHOE The total shaker shoe areas are from 3,40 to 4,50 square meters, depending on the model. The upper sieve is a modern lamella sieve type. On the RV2 lamella sieve, every other lamella is angled down to efficiently prevent straw fragments from entering the grain tank. On all models the lower sieve is an adjustable lamella type also, called RV3. The large-diameter fan effectively blows to the shaker shoe. The speed of the fan can be conveniently adjusted from the cabin. The COMIA includes an unprecedented feature for separating returns. The returns are not taken to the main...

AVARA - MORE THAN JUST GOOD LOOKS Eight work lights, modern LED day driving lights, and a wide windscreen. The internal measurements have grown by 30 cm which provides a lot of extra space. The driver’s clear visibility of the cutting table has been one of the things that were taken in to consideration when designing the new cab. An air suspended seat comes as standard with the AVARA cab. The safety of the driver is ensured with a seat belt. Just by sitting in the new cab you can notice many handy details. There is a sunscreen that can be pulled down from the ceiling of the cab. There is...

ONE-HAND CONTROL Best threshing results are achieved when the combine harvester is easy to use. The control console integrated in the seat acts as the nerve centre of the AVARA cab. COMVISION II, a large 12.3-inch touchscreen, a control console, and a drive handle exclusively designed for the COMIA-range are so obvious, that’s why it is easy to use. The 45-degree design of the handle differs from that used in other handles on the market. In this position, the hand can rest on top of the handle while still being able to control different functions. The multi-function lever is only one part...