SAMSON PG SLURRY TANKERS - growing together

PG Slurry Tankers SAMSON AGRO has always devoted particular care and attention to quality, durability and machine efficiency when designing its products. Based in Denmark, a country with one of the most stringent regulations concerning organic fertilizer spreading and environmental standards in Europe, SAMSON AGRO has several decades of experience in the management and application of organic slurry and muck. SAMSON PG slurry tankers are available in two-axle versions (15m3, 18m3 and 20m3) and three-axle versions (21m3 and 25m3). The PG product range has been developed to satisfy the requirements...

ADDITIONAL EQUIPMENT AND ACCESSORIES NEW SAMSON SAP ARM WITH EJECTOR AND CENTRIFUGAL PUMP The new SAMSON SAP arm can be purchased for all PG slurry tankers. The SAP system uses a SAMSON pump with a capacity of approximately 6,000 L/min* and the SAMSON venturi ejector has a capacity of approximately 3.500 L/min*. This system has been developed for filling the slurry tanker from slurry storages under stables, difficult to access lagoons, various tanks, biogas plants and supply vehicles. It is a flexible solution for the pumping of many different types of slurry and substrate. The ejector has a...

3-POINT HITCH All SAMSON PG slurry tankers can be equipped with a powerful hydraulic 3-point hitch/lift with double acting cylinders. It can both lift and press on the injectors/incorporators. The 3-point hitch/lift can also hydraulically stabilise the working depth of the injectors/incorporators. The 3-point hitch/lift is totally integrated into the rear of the tanker and has a lifting capacity of 3.8T. When spreading using SAMSON injectors/incorporators, it also allows load transfer of up to 5.0T from the tanker onto the equipment. All functions of the 3-point hitch/ lift are programmed and...

PG: Key Selling points » Long lifetime Strong construction • The tank is made from 5 mm thick steel (S235) • The two stiles are made of hardened steel (S355) • The wheel brackets are made of Domex 600 high tensile steel • Fully welded chassis • Over dimensioned traction triangle • The low centre of gravity reduces the daily vibrations in the entire construction of the tank • Can easily carry wide and heavy equipment like drip hose booms, disc injectors and tooth incorporators Efficient working machine • Possible to use wide drip hose booms, tooth incorporators and disc injectors • Rapid changing...

The centrifugal unloading pump ensures a more accurate and reliable dosing in the spreading equipment (in the total width of the equipment) than a vacuum unloading pump The SAMSON slurry master 6000 computer and the flow meter ensure a high dosing standard per hectare. The weight of the tanker is low compared to its size minimizing the damage on the fields and on the crops The tank is built in sections and the rear end is emptied first, ensuring a high weight transfer onto the tractor and minimizing the risk of wheel spin and damage to the field and the crop Efficient unloading centrifugal pump...

TECHNICAL SPECIFICATIONS PG 15-18-20 med kran Technical specifications of PG tankers (mm) Height, depending on equipment Width, depending on wheels mounted, without spreading equipment Wheel configuration (Alliance or Nokian) Track width Empty weight for basic tanker (kg) (not contractually binding) Weight of additional equipment Pump tower arm Rear hitch/lift