SAMSON IMPLEMENTS
24Pages

- growing together

SAMSON DRIP HOSE BOOMS SB/SBX/SBX2 - growing together

DRIP HOSE BOOMS FROM SAMSON AGRO The SAMSON AGRO drip hose booms are fully galvanized and fitted with a trapezoidal suspension system. This ensures that the boom is always horizontal, which under normal operating conditions enables the hoses to follow the surface of the ground, even when the terrain is uneven. The drip hose booms are lifted, lowered and folded by a hydraulic master/slave system, where the corresponding sections are folded at the same time. The drip hose booms are controlled by the Samson AGRO Slurry Master 6000 (SM6000) computer. SAMSON AGRO SB drip hose booms are delivered...

When the drip hose boom is folded in along the sides of the slurry tanker during transport, it has an inclined slope in order to minimize dripping from the hoses. ADS is optional extra on the SB booms. All SBX and SBX2 drip hose booms are equipped with the ADS (Anti-drip system). During transport, the SBX-boom is folded along the sides of the slurry tanker and placed above the wheels, reducing its width during transportation. VERTICAL DISTRIBUTOR All SAMSON AGRO drip hose booms are equipped with a vertical distributor with rotating cutting knives. ONE OR TWO DISTRIBUTORS The SAMSON AGRO...

With section distributor - Minimal overlap Without section distributor - Large overlap AVOID OVER OR UNDER DOSING OF THE SLURRY With the SAMSON AGRO section distributor the prevention of over or under dosage of slurry and the optimal utilization of the organic fertilizer can be achieved. The distributor can be blocked in 1meter sections, which is useful for example when fields are not rectangular. When starting, the slurry flows first into the longest hoses - then into the shorter ones. This function ensures that the slurry comes out of all the hoses at approximately the same time, avoiding...

» Long life time • Strong vertical SAMSON AGRO distributor All the steel on the drip hose booms is galvanized » High efficiency The distributor is equipped with a stone trap that col- vertical distributor. A vertical distributor has a higher capacity than a horizontal one. This results in a shorter lects foreign objects so they are not causing unnecessary wear on the distributor and avoiding potentially serious damage • emptying time and an increased output per hectare • The SBX2 drip hose booms have 2 distributors and thus have an even higher capacity. This high capacity is sup- The boom...

AGRO drip hose booms » Optimal spreading of the slurry leads to an optimal yield • Trapezoidal Suspension with the addition of a controlled accurate dosage of slurry across the booms width High capacity, less operating time per hectare for less fuel consumption The distributor and cutting knives inside it ensure an » • Low energy consumption (fuel) override, ensures a uniform distribution of slurry independent of the terrain • Drip hose booms are made of strong, practical and The stone trap removes foreign objects that may X-models are designed for heavy duty. This reduces treated...

TECHNICAL SPECIFICATIONS SB/SBX DRIP HOSE BOOM Number of vertical distributor Distance between drip hoses [mm] * The minimum width when the boom is folded. SAMSON AGRO A/S / Vestermarksvej 25 / DK-8800 Viborg / Tel. +45 8750 9300 / Fax +45 8750 9301 / www.samson-agro.com

SAMSON AGRO INCORPORATOR CM/CMX - growing together

CM incorporator from SAMSON AGRO The SAMSON AGRO CM double row incorporator, CM, ensures an optimal use of the nutrients in slurry and other liquid organic fertilizers. When the organic liquid fertilizer is incorporated in the soil, both the evaporation of ammonia and odors are significantly reduced. The soil and crops suffer no damage from the injection process by the incorporator and it is ensured that the slurry is fully covered. Construction The CM incorporator is constructed in high strength steel. The strong spring tines position the slurry down to a depth of up to 15 cm. The packer...

STANDARD EQUIPMENT STRONG TINES AVOIDING THE BUILD-UP OF MATERIAL TRANSPORT POSITION The strong tines on the standard model can position the slurry down to a depth of 15 cm, with a distance of 25 cm between each tine. The distance between the two tine rows is wide enough to prevent straw etc. from getting stuck, therefore there is hardly any build-up of material. The CM incorporator is easy to transport with both side sections designed to fold up. A hydraulic lock ensures the sections remain securely fixed for transport. OPTIONAL ACCESSORIES HYDRAULIC GATE VALVE HYDRAULIC DEPTH CONTROL...

THE SAMSON AGRO CM Incorporator » Long life • The frame is made of high-strength Domex 600 steel The construction is strong and consists of well int grated parts increasing the strength of the equipment » ptimal spreading of slurry O - optimum yield • The heavy-duty tines can be relied on for effective work in stubble and hard soil types. Slurry can be positioned » High efficiency • the slurry at such depth enables the optimal utilization of the nutrients in the slurry and helps to significantly The distance of 25 cm between the tines is very effective and provides good through-passage ....

CMX incorporator from SAMSON AGRO The new three row CMX incorporator from SAMSON AGRO is designed for use in heavy and clay type soils. The frame is galvanized and the tines are very robust constructed. The three row structure of the CMX incorporator allows the passage of greater amounts of organic material. It is effective in stubble - including corn stubble or stubble with large quantities of organic residues. The CMX incorporator has more height under the frame, and longer and even stronger tines compared to CM. The CMX is equipped with two pairs of wheels in front of the frame in order...

GOOD GROUND CLEARANCE Plant remains passes easier through the CMX incorporator due to the greater height under the frame. The organic material cannot build-up and under the frame. The triple row design gives more distance between the tines so that larger amounts of plant material can pass through the incorporator. HIGH AND POWERFUL TINES ADJUSTING THE FOLLOWING HARROW The tines are very strongly built, so they can work in heavy soils. It is possible to adjust the working depth and the angle of the following harrow on two handles. This leaves the field flat. And the slurry is covered well....