SG
8Pages

- growing together

SAMSON AGRO’s SG slurry tankers with swan neck drawbar The slurry tankers from SAMSON AGRO are available in two models: the SG23 with a tandem axle and 22.6 m3 tank volume, and SG28 with a triple axle and 27.8 m3 tank volume. ing pump on the pump tower and the discharge pump. However, if suction is selected on the pump tower the tractor’s hydraulics will power the pump. The swan neck drawbar for the SG series has been designed to transfer maximum weight onto the tractor. This means that a fully loaded SG28 transfers more than 10 tonnes of its weight to the tractor’s 110 mm Scharmüller ball...

Extra equipment Schematic diagram of ejector Pressure and flow when the loading pump is under suction. Explanation: Red arrow shows the vacuum that draws the slurry up into the filling pump. Blue arrow shows pressurized slurry driving the ejector. Green arrow shows the unpressurized slurry flow. Ejector suction When using the ejector, the filling pump on the pump tower can be primed for filling. Once the pumphouse on the filling pump has been filled with slurry it automatically takes over the loading. The new ejector system has stood its test on the SAMSON AGRO slurry tankers and has been...

Examples of standard and extra equipment/accessories Extra equipment Hydraulic wheel drive Hydraulic wheel drive with reverse function is also an optional extra. With hydraulic wheel drive, about 50 kW can be transmitted to the tanker’s fixed axle. In very hilly, uneven of soft terrain, the SAMSON hydraulic wheel drive is the obvious choice for optimal driving with better traction and fewer slippages, making driving under more difficult conditions possible – for example, when driving uphill using a grassland injector. The ability to reverse means the driver can often get himself unstuck...

Examples of standard and extra equipment/accessories Electronic wheel steering The SAMSON SG slurry tanker comes equipped with a strong lift with approximately 3.6 tonne lifting capacity. It can apply pressure of up to 5 tonnes, for example when using a slurry injector on grassland. The lift functions can be automatically controlled via the SlurryMaster6000, which also has an integral individual depth regulation for exact control of implements. BPW axles and brakes on SG28 SG23 is fitted with Colart axles and brakes. This is also standard on, for example, the well-known SAMSON AGRO PG...

SG Slurry Tanker » Durability Strong construction • The tanker is made using 5 mm steel he two underframe flanges are made of hardened steel T he swan neck is made from high-tensile steel T he wheels are located on the side of the tanker – this T Changing implements is quick and simple ith the pump tower facility the driver can remain in the W gives a low centre of gravity, making the construction he SG slurry tanker is fitted with auto-load and weight T tractor cabin during the filling of the tanker more stable. • Wide implements such as driphose booms, injectors and Fully-welded chassis...

» Optimal application of slurry - optimal yield • The slurry tanker can be fitted with implements such as driphose booms, and injectors for grass and black soil, which can increase the utilisation of the slurry In contrast to a vacuum pump, the centrifugal pump on the SG tanker exerts a higher and a more constant pressure. This results in a more precise dosing along the entire width of the implement The computer and flow gauge in the SAMSON Slurry- The tanker transfers much of its weight to the trac- Master 6000 also ensures a very precise dosing tor’s ball hitch. This gives the tractor...

technical SPECIFIcations SG 23 med kran liggende Dimensions in mm / tanker sizet Tanker diameter Height, depending on equipment Ball height Length of swan neck Alliance 650/60 - 30,5. Diagonal type 328 Alliance 650/60 - 30,5. Radial type 380 Alliance 750/60 - 30,5. Radial type 390 Alliance 850/50 - 30,5. Radial type 390 Weight, incl. pump tower and 750 mm wheels (kg) Ball load without equipment, empty tanker, kg Ball load without equipment, full tanker, kg ¹ When the ejector (if mounted) i sused for filling, 400 liters of the capacity is used for starting the ejector. (retention system)